Pouches & Mag Carriers

In-pocket spare-mag holster that disguises the magazine as a pocket knife and snags the pocket seam so the holster stays put on the draw.

A hard-sided friction-retention tourniquet case that keeps a CAT exposed for true one-handed deployment from a belt, vest, or MOLLE mounting surface.

Magnetic in-the-pocket mag carrier that holds a spare on two neodymium magnets and disappears like a pocket-knife clip.

Minimalist kydex AIWB spare-mag pouch built to ride forward of the hip alongside an appendix holster.

Ambidextrous universal kydex mag carrier with a patented retention device that adjusts to virtually any 9mm/.40 magazine, IWB or OWB.

Deep general-purpose pouch for layered sustainment and support items.

Collapsible dump pouch for magazines and loose range equipment.

The duty-belt Rifle TACO. Heavy-duty nylon laminate over shock cord and webbing, sized to clip onto MOLLE or onto a duty belt up to two inches wide.

Belt-mounted two-magazine pouch sized for FN P90/PS90 50-round magazines.

Drop-leg thigh rig sized for two FN P90/PS90 50-round magazines.

Compact foldover kydex single-mag carrier that runs IWB or OWB, rounds forward or rear, with a tapered nose for comfort.

One stacked pouch that carries a rifle magazine and a pistol magazine, so a slick belt or a two-column placard covers both reloads in a single footprint.

The lighter second-generation Rifle TACO: laser-cut nylon laminate over a woven thermoplastic core, contoured molded sides, and half-inch MOLLE that mounts to a placard or straight onto a belt.

A modular roll-and-carrier IFAK system with organized med roll, HANK grab handles, and belt or MOLLE mounting. Medical items are not included.

Carrier-mounted pouch for a compact hydration reservoir.

Extended-length kydex AIWB mag pouch with adjustable insertion depth and ride height to kill printing at the beltline.

Polymer-reinforced nylon pocket that holds one AR-15 magazine partially exposed for a fast speed reload, with a removable shock cord.

Larger medical pouch for expanded hemorrhage and trauma supplies, run as a dangler or as a fanny pack.

Trauma medical pouch for belt, carrier, or pack-mounted kits.

The first-generation magnetic pocket mag carrier: steel and titanium, one neodymium magnet, priced under the Gen 2.

Adjustable kydex OWB single-mag carrier with full control over retention and cant, fits Glock, M&P, CZ, FN, HK, 1911, Sig and more.

Compact medical pouch sized for pocket or small-bag carriage.

Adjustable hybrid pouch that swallows almost any rifle magazine, AR, AK, M14 or FAL, and locks it with shock cord over polymer brackets.

Compact general-purpose pouch for belt or carrier-mounted essentials.

Hybrid kydex-and-nylon AR-15 mag pouch with a Kydex Wedge Insert that holds the magazine by friction, no bungee required.

Shorter-cut Esstac KYWI pouch that exposes more of the magazine for the fastest grab while keeping kydex friction retention.

Low-profile elastic AR-15 mag pouch over a thermoplastic backer, with an included shock cord for adjustable retention.

TPV soft-shell rifle mag carrier with a torsion-plate cord retention system, built for belt and RTI-mounted setups. Fits AR, AK, and AR-10/.308 magazines.

One-ounce machined aluminum belt clamp that magnetically traps keys, gloves, and muffs against a 1.5-inch belt.

Ultralight elastic AR-15 mag pouch that lays flat when empty and disappears under a placard or on a low-profile belt.

Minimal elastic holder for staging a tourniquet on-body.

Covered tourniquet pouch for belt or MOLLE mounting.

Three-cell elastic 5.56 mag pouch with an included bungee retention kit, built to mount on Spiritus chest rigs and MOLLE.

Carbon-fiber-reinforced-nylon pocket mag pouch with a patented locking draw and adjustable fit for single- or double-stack mags.

Tall general-purpose pouch for narrow MOLLE columns.

General-purpose load-carriage pouch with a compact exterior footprint.

Expandable UCAS back panel for the Spiritus LV-120 with a configurable upper flap and a built-in lower GP pocket.

UCAS back panel for the FCPC V5 with two stacked GP pockets, full-width zippers, and internal loop fields.

Elastic organizer for batteries and chemical lights on compatible equipment.

The pistol-sized GEN 2 TACO. One handgun magazine, adjustable shock cord retention, and a back panel that takes a placard clip or a belt without an adapter.

Lightweight elastic insert for three 5.56 or .223 AR magazines in the Kangaroo Front Flap V2.

Two-cell elastic insert for double-stack pistol magazines or similarly sized tools in a Micro Fight chassis.

Preconfigured Crye zip-on panel with GP, magazine, hydration, tool, and hidden flat-pocket storage.

Single-cell elastic 5.56 insert for adding one rifle magazine to a Micro Fight chassis or JSTA pouch.

Three-cell elastic insert for carrying 5.56 PMAG and USGI magazines in a Micro Fight chassis.

Four-cell elastic insert offered for common MPX, Scorpion, MP5, Glock-size, and MP7 magazines.

Hook-backed flap that converts the center TRAAP cells from bungee retention to covered storage.

Three-cell 5.56 insert with bungee retention for the MCR1 internal pocket and compatible hook-and-loop carriers.

Two-cell elastic insert for .308 and full-power 7.62 magazines in compatible Ferro kangaroo pockets.

Three-cell elastic magazine insert for a Slickster or compatible kangaroo pocket, including Ferro's V2 flap.