▶Can I generate custom shoot or no-shoot targets?
Yes. The custom target generator on this page builds randomized shoot/no-shoot discrimination sheets (armed vs. unarmed silhouette cues), call-out drill grids with a matching caller script, dot sheets in any diameter from 0.75 to 3 inches, and IPSC silhouettes with scoring zones blacked out (D zone out, A zone only, head box only, or a random hardcover swath). The randomized sheets (shoot/no-shoot, call-out, and the hardcover IPSC swath) print a seed on the footer, so you can reproduce an exact layout. Previewing is open to everyone; printing requires the free subscription.
▶Are these printable targets really free?
Yes. All 48+ targets, drill cards, checklists, and reference sheets are free to download and print. The only requirement is a free email subscription to unlock the download grid. No credit card, no paywall, no per-target charge.
▶What is a B-8 target and why does everyone train on it?
The NRA B-8 is the 25-yard timed and rapid fire bullseye: a black bull covering the 9, 10, and X rings (5.54 inches across) with the 8-ring at 8 inches. It became the modern pistol standard because drills like The Test (10 rounds, 10 seconds, 90+ points at 10 yards) use its scoring rings to measure accountability, not just hits. Our printable repair center reproduces the exact ring dimensions on letter paper.
▶What is a tall target test?
A tall target test verifies that your scope actually moves point of impact as far as the turret claims. You zero at 100 yards, dial up 10 MOA (or 3 MIL), and fire at the same aim point. The group should land 10.47 inches above zero for 10 MOA, or 10.80 inches for 3 MIL. Dividing measured rise by expected rise gives your true click value, which matters for every long-range dial. Our version tiles across three letter pages with exact MOA and MIL ladders.
▶What is a Know Your Limits (KYL) target?
A Know Your Limits rack is a row of shrinking targets, ours runs 2 inches down to 0.25 inches, where each hit banks points but a single miss zeroes the string. The game forces honest self-assessment: keep shooting smaller circles for more points or stop while you are ahead. It is a rimfire and precision-rifle favorite that translates directly to knowing your wobble zone under pressure.
▶How do I print shooting targets at the correct size?
Set your printer to 100% scale (actual size). Do NOT select "Fit to page" or "Shrink to fit", those options will resize the target and break the 1-inch grid spacing. Print on standard 8.5" x 11" letter paper. Verify accuracy by measuring a 1-inch grid square with a ruler before shooting.
▶What is a 50/200 zero target?
A 50/200 zero target lets you confirm a 50-yard zero from the 25-yard line. With a 50/200 zero on an AR-15, your point of impact at 25 yards should be 1.2 inches below point of aim. The bullet then crosses your line of sight again at 50 yards, peaks roughly 2 inches high at 100 yards, and returns to zero around 200 yards.
▶What is the difference between 50/200 and 36/300 zero?
The 50/200 zero (civilian standard) keeps the bullet within 2-3 inches of point of aim from 0 to 250 yards. The 36/300 zero (USMC carbine zero) extends maximum point-blank range out to about 300 yards but rises higher at mid-range, around 6-8 inches at 200 yards. For home defense and 0-200 yard work, 50/200 is the better choice.
▶What is the Dot Torture drill?
Dot Torture is a 50-round accuracy and fundamentals diagnostic on a 10-dot target shot at close range (typically 3-5 yards). Each dot tests a different skill: slow fire, draw, strong hand only, weak hand only, reloads, and transitions. A perfect 50/50 score is the benchmark before increasing distance. Most shooters cannot clean it on demand without dedicated practice.
▶What is a DOPE card?
DOPE stands for Data On Previous Engagements. A DOPE card records your verified holds, wind calls, and elevation adjustments at known distances for a specific rifle, optic, and ammo combination. Precision shooters update the card every range session and tape it to their stock or carry it in a wrist coach for matches.
▶What is the difference between MOA and MIL?
MOA (Minute of Angle) is 1/60th of a degree, roughly 1 inch at 100 yards. MIL (milliradian) is 1/1000th of a radian, roughly 3.6 inches at 100 yards. Most U.S. red dots and hunting scopes use 1/4 MOA clicks (each click moves point of impact 0.25 inches at 100 yards). MIL scopes typically use 0.1 MIL clicks (0.36 inches at 100 yards). Pick one system and stick with it, the conversion chart helps when borrowing data from another shooter.
▶Should I keep a written record of my firearm serial numbers?
Yes. If a firearm is stolen, the police report requires the make, model, caliber, and serial number, and most people cannot produce those from memory. A paper record avoids putting serials in a cloud account or spreadsheet. Print our firearm record sheet, log every firearm, optic, and suppressor, photograph each engraved serial, and store the sheet separately from the guns, in a fireproof document box or bank box.
▶What size paper do I need to print these targets?
Standard 8.5" x 11" letter paper. Cardstock (65 lb or heavier) is recommended for targets you want to reuse or staple to a backer, since regular printer paper tears in wind. Distance markers print best in landscape orientation. Disable browser headers and footers in the print dialog for clean margins.
▶Why are these resources behind a subscriber gate?
The downloads are gated behind a free newsletter subscription so we can notify you when we publish new drills, targets, or build guides. Everything stays free forever. Unsubscribe at any time, no questions, no friction.