Suppressor Mount Adapters

HUB adapter that converts a 1.375x24 threaded suppressor to Dead Air's KeyMo quick-detach ecosystem.

For HUB/Bravo-thread suppressors such as the Dead Air Nomad 30. Connects the can to a Rearden or Plan-B taper muzzle device.

Direct-thread 5/8x24 fixed mount for running a Mojave, Ghost 45, Wolfman or RXD910Ti on a fixed-barrel .30-caliber or large-bore host.

Spring-loaded Nielsen device that lets a tilting-barrel pistol cycle reliably with a SilencerCo can mounted; 1/2x28 SN host thread.

1/2-28 direct-thread mount for HUB cans such as the Nomad, Sierra-5, Primal and Sandman X.

5/8-24 direct-thread mount for HUB cans such as the Nomad, Sierra-5, Primal and Sandman X.

The complete Nielsen booster for a Wolfman, Ghost 45 or Primal on a 1/2-28 tilting-barrel pistol.

R-Series adapter that converts a 1.375x24 HUB suppressor to Dead Air's Xeno taper-mount ecosystem.

HUXWRX QD adapter for suppressors with a 1.375x24 HUB rear interface.

Factory Bravo/HUB adapter that converts a 1.375x24 suppressor to SilencerCo's ASR quick-detach ecosystem.

Steel 1/2x28 direct-thread mount for Bravo, that is HUB, cans such as the Omega 300 and Hybrid 46.

Two-part Charlie Piston Mount and 9mm 3-Lug Mount assembly, the only 3-lug path for the Omega 36M and Hybrid 46M.

Replaces the piston booster spring so a SilencerCo pistol can mounts solidly on a fixed-barrel PCC, carbine, or subgun.

Factory adapter that converts a 1.375x24 HUB suppressor to the 5.56 SureFire SOCOM Fast-Attach ecosystem.

Heavy-duty HK 3-lug adapter for suppressors with a 1.375x24 HUB rear interface.

1/2x28 direct-thread mount that takes the BANISH PSTL 9 TI off its Micro Booster and onto a fixed barrel.

Replaces the host's Benelli Mobil choke tube and carries the collar the SGN 20 Ti locks onto.

Replaces the host's Browning Invector DS choke tube and carries the collar the SGN 20 Ti locks onto.

Replaces the host's Browning Invector Plus choke tube and carries the collar the SGN 20 Ti locks onto.

Replaces the host's Remington choke tube and carries the collar the SGN 20 Ti locks onto.

Converts a Ghost-M, Wolf 9SD or Wolfman to Dead Air's KeyMicro quick-detach muzzle devices.

The complete Nielsen booster a Mojave 9 or Mojave 45 needs to run on a 1/2-28 tilting-barrel pistol.

The complete Nielsen booster a Mojave 9 or Mojave 45 needs on a European-threaded tilting-barrel pistol.

Sealed HK-pattern 3-lug adapter that hangs a Primal, Wolfman, Mojave or Ghost 45 on a 9mm 3-lug host.

Direct-thread 1/2x28 fixed mount that replaces the booster on a Mojave, Ghost 45, Wolfman or RXD910Ti for fixed-barrel hosts.

Factory .30-bore thread-insert and collar kit for mounting a Wolverine PBS-1 on 26×1.5 mm LH PAP M92 and M85 muzzles.

Self-aligning taper adapter that mates a 1.375x24 HUB suppressor to Dead Air's big-bore Xemax brakes.

Converts a Ghost, Mojave or Wolfman to Dead Air's Xeno taper-mount muzzle devices.

Titanium M18x1.5 direct-thread adapter that hangs a DTF-LTi or DTF-STi off an 8.6 Blackout barrel.

HK-spec 3-lug interface that installs into a Griffin pistol can's booster housing for fixed-barrel hosts.

Short 1.375x24 HUB adapter for Griffin Taper Mount muzzle devices, including the Paladin brake.

The booster housing and EZ-LOK piston that let a Revolution 9 MOD 4 cycle on a tilting-barrel pistol.

Aluminum spacer that replaces the booster spring so a Griffin pistol can runs on a fixed-barrel host.

One-piece 1/2x28 direct-thread mount that replaces the piston, spring and retainer on a Griffin pistol can.

Only for SilencerCo Charlie-thread suppressors such as the Omega 36M, Hybrid 46M, and Velos LBP. Connects the can to a Plan-B taper muzzle device.

Replaces the host's choke tube and direct-threads a SEG12 onto its 1.375-24 rear.

HK-spec 9mm 3-lug adapter that makes a HUB-threaded suppressor mount to a 3-lug barrel.

Drops the Obsidian booster into a HUB suppressor so a Sub9 or Alaskan360 can run on a 1/2x28 tilting-barrel pistol.

5/8x24 direct-thread mount that hangs an Alaskan360, Alaskan360Ti or other HUB can straight off the barrel.

Quick-detach adapter that mates a HUB suppressor to Rugged's Dual Taper Locking muzzle devices.

9mm HK-pattern 3-lug mount that threads straight into an Alpha-interface can such as the Spectre 9.

1/2x28 direct-thread mount for Alpha-interface cans on fixed rifle barrels.

5/8x24 direct-thread mount for Alpha-interface cans on fixed rifle barrels.

Alpha-interface ASR mount that seats over an ASR muzzle device on a Spectre 9 or Omega K.

Charlie-interface ASR mount for the Velos LBP, Omega 36M, Hybrid 46M and Chimera 300.

Steel 5/8x24 direct-thread mount for Bravo, that is HUB, cans such as the Omega 300 and Hybrid 46.

1/2x28 direct-thread mount for Charlie-interface cans on a fixed barrel.

5/8x24 direct-thread mount for Charlie-interface cans on a fixed .30-caliber barrel.

Booster housing that lets an Omega 36M or Hybrid 46M ride a tilting-barrel pistol, or take a 3-lug mount.

Titanium 1/2x28 direct-thread mount for Bravo, that is HUB, cans such as the Omega 300, Hybrid 46 and Scythe-Ti.

Titanium 5/8x24 direct-thread mount for Bravo, that is HUB, cans such as the Scythe-Ti and Omega 300.

Factory adapter that converts a 1.375x24 HUB suppressor to the 7.62 SureFire SOCOM Fast-Attach ecosystem.

Converts a 1.375x24 HUB suppressor to YHM's ratcheting Phantom Q.D. muzzle-device lockup.

Low-profile taper-seal adapter that converts a 1.375x24 HUB suppressor to YHM's sRx muzzle-device system.