Grams Engineering P226 No Lock-Back Follower Kit (FKSGP2-11)
The SGP2 follower and 11-coil spring kit that takes a Mec-Gar 18-round P226 tube with a CRS Comp Basepad to a reloadable 23 rounds, at the cost of slide lock-back.
- Price
- $19
- Brand
- Grams Engineering
- Category
- Magazines
Featured in
Features
- •SGP2 Grams-format follower
- •11-coil spring included
- •Mec-Gar 18-round P226 9mm tubes
- •Will not activate slide lock
Capability Boosts
Recommended For
+12 more
More pistol guides & articles
Guides
Overview
This is the 23-round answer. The kit is a Grams-format SGP2 follower and an 11-coil spring, specified for Mec-Gar 18-round P226 9mm tubes that measure up to 145mm assembled with a base pad on. Paired with the CRS Comp Basepad it yields a reloadable 23 rounds, which is the highest published number on a P226 magazine.
The trade is printed on the box: the follower will not activate slide lock. An empty gun will not lock back, so the reload cue every shooter builds on a P226 goes away and gets replaced by a dead trigger. That is a training change, not just a parts change, and it is the reason the 11-coil spring with a stock follower exists as the 22-round alternative.
Get the part number right. Grams publishes FKSGP-11 and FKSGP-13 for the P320 and P250, and those use the SGP follower. The P226 kit is FKSGP2-11 with the SGP2 follower. Grams also notes that follower kits cannot be returned once the packaging is opened, and that a magazine tube outside normal tolerances may need tuning to reach the published round count.
Key Features
- Grams-format SGP2 follower and 11-coil spring
- Specified for Mec-Gar 18-round P226 9mm tubes up to 145mm assembled
- A reloadable 23 rounds with the CRS Comp Basepad
- Ships pre-tuned, with no modification required in a tube within tolerance
- Part number FKSGP2-11, distinct from the P320/P250 FKSGP-11
Pros
- +The highest published reloadable round count on a P226 magazine
- +Pre-tuned out of the package in a tube within tolerance
- +Specified to a 145mm assembled length, so it gauges against a known number
Cons
- −The follower will not activate slide lock, so an empty gun does not lock back
- −Cannot be returned once the packaging is opened
- −An out-of-tolerance tube may need tuning to make the round count
Detailed Specifications
- partNumber
- FKSGP2-11
- follower
- Grams-format SGP2
- spring
- 11 coil
- fitment
- Mec-Gar 18-round SIG P226 9mm tubes up to 145mm assembled
- capacity
- 23 reloadable rounds with the CRS Comp Basepad
- slideLockBack
- None; the follower will not activate slide lock
Similar Products
Compatible Platforms
Compatibility Tags
Build Your Custom Configuration
Add the Grams Engineering P226 No Lock-Back Follower Kit (FKSGP2-11) to your build and see how it enhances your platform.