Badger Ordnance Condition One J-Arm + Trijicon RMR footprint Micro Sight Mount

This builder entry bundles the two Badger Ordnance parts required to mount an offset red dot on a Condition One Modular Mount: a 35-degree or 45-degree J-Arm and the Trijicon RMR footprint Condition One Micro Sight Mount. The J-Arm bolts directly to one of the scope mount body's accessory ports and can be installed on either side, fore or aft. It does not clamp to the rifle's Picatinny rail, so it belongs only on a build already using the Condition One scope mount.

This selection records the Trijicon RMR footprint mounting path explicitly. The builder treats the J-Arm and direct-mount Micro Sight Mount as one complete selection instead of omitting the required plate.

Badger offers 1.70-inch and 1.93-inch J-Arms at 35 or 45 degrees. The arm weighs 0.55 to 0.62 ounce, while the direct-mount plates weigh roughly 0.6 to 0.9 ounce by footprint. The J-Arm uses 7075-T6 aluminum and the Micro Sight Mount uses 6061-T6 aluminum, both with Type III hard-coat anodizing.