Mounts

Bombproof one-piece mount for LPVOs and scopes. High clamping force maintains zero under abuse.

One-piece 34mm bolt-action scope mount with 20 MOA elevation and chassis-rifle clearance.

Symmetric one-piece precision mount at a 1.34" centerline, offered in 0 or 20 MOA. Lower and lighter than the AUS, with no accessory wings.

2.26" height optic mount for micro red dots. Optimized for heads-up shooting with night vision and gas masks.

Premium one-piece LPVO mount with cross-bolts and accessory rail. Industry standard for duty and precision LPVOs.

Direct-mount Trijicon RMR optic mount for the Mossberg 500/590/590A1/930 that uses the factory drilled-and-tapped holes on the receiver. Includes XS rear ghost ring for emergency backup co-witness.

Competition-oriented 34mm precision scope rings with integrated top rail and offset level cap.

Modular billet LPVO mount at a 1.54" centerline with accessory wings for offset dots. Lighter than the Badger Condition One.

Modular AKM side-rail lower for low, centered optic mounting on stamped AKM-pattern rifles.

One-piece integral ring-and-base alloy mount near two ounces, model-fit for specific hunting actions.

Hinged railed dust-cover mount for the exact AK models Texas Weapon Systems assigns to SKU 33310-X.

45° offset mount for red dots or accessories on M-LOK or Picatinny rails

Inline M-LOK mount for scout-style weapon lights

Aluminum rings with Pos-Align polymer inserts that self-align the scope and add up to 40 MOA of cant.

Direct C&H shotgun optic mount for Benelli M2 and M4 hosts with RMR / Holosun C-footprint optics.

Direct C&H shotgun optic mount for Beretta A300, A400, and 1301 hosts with RMR / Holosun C-footprint optics.

M13.5x1 LH piston for the Dead Air P-Series pistol mount, the European-threaded 9mm thread option.

Aftermarket optic mount that adapts the standard (non-T.O.R.O.) Taurus G2, G3 with old-style rear sight, PT111 G2, PT140 G2, PT709, PT740, and TX22 to the Trijicon RMR / Holosun 507C footprint.

The standard counterweight kit for EXFIL, EPIC, and SAR Tactical helmets. Three modular weights use hook-and-loop plus webbing or shock-cord retention to balance front-mounted NVGs and reduce neck strain.

Precision-machined aluminum scope rings for 1-inch, 30mm, and 34mm tubes with a stepped interface and no-lapping fit.

Receiver-mounted steel Picatinny rail that solves the M1A's biggest weakness: nowhere to put a scope.

Lightweight 1.57-inch 30mm scope mount with dual ClickDrive clamps, No-Gap rings, and the LevelDrive leveling system.

Precision-machined direct shotgun optic mount for the Mossberg 590/930 RMR/SRO SW1300 variant.

Serialized 7075 billet precision rings with four- or six-screw caps for heavy-recoil and competition rifles.

Springfield's factory 4th-gen aluminum mount: the lightest, lowest-cost way to get a Picatinny rail over an M1A receiver.

Hinged railed dust-cover mount assigned to fixed-stock PSAK GF3, GF4, and GF5 rifles as SKU 33317-X.

Raises Aimpoint PRO and 30mm red-dot optics to the 2.26 inch FAST height.

Tall 2.05" centerline LPVO mount for passive-aim, heads-up shooting. Modular base accepts offset and 12-o'clock dots.

Standalone 45° rail mount drilled for RMR, RMSc/SMS, Docter/Noblex, and C-More RTS/STS footprints

Integrated 30mm LPVO mount with an Applied Ballistics solver and a projected ballistic-compensated aimpoint.

Lightweight extended one-piece mount at a value price. Good return to zero for the price point.

Aimpoint's factory spacer that stacks under a Micro base to raise the optical axis to 39mm, a lower 1/3 co-witness on an AR-15.

Forward-mounted picatinny rail that replaces the upper handguard for true scout-mount optic placement

Auto-locking QD cantilever mount with a 2" forward offset. The benchmark return-to-zero QD mount for LPVOs.

35°/45° offset kit that attaches to the Area 419 Tactical One-Piece scope mount

7075 precision rings built to integrate with the Area 419 SendiT level and ARCALOCK accessory ecosystem.

Low-profile optic mount for the Beretta 1301 that replaces the factory ghost ring rear sight. Accepts Aimpoint Micro footprint optics and co-witnesses with the factory front sight.

Direct-mount Trijicon RMR optic mount for the Remington 870/1100/11-87 that uses the factory drilled-and-tapped holes on the receiver. Includes XS rear ghost ring for emergency backup co-witness.

No-drill forward scout rail for the SKS that fits every variant, including the Yugo 59/66, with a removable Picatinny top.

Fixed Aimpoint Micro mount with an integral recoil lug and steel clampfoot, in 1.43", 1.70", and 1.93" heights.

Boutique no-gunsmithing M1A rail praised for a tight receiver fit and simple, repeatable install.

Quick-detach Aimpoint Micro mount whose BLAC lever self-tensions, in ultra-low, 1.4" absolute, 1.5" lower 1/3, and 1.7" high versions.

Return-to-zero quick-detach scope mount engineered for the SCAR's recoil impulse, with integrated rings.

Direct-to-rail 45° offset base in footprint-specific versions, so the dot bolts on without a separate adapter plate

Direct C&H shotgun optic mount for Benelli M2 and M4 hosts with Aimpoint ACRO and C&H DUTY optics.

Direct C&H shotgun optic mount for Beretta A300, A400, and 1301 hosts with Aimpoint ACRO and C&H DUTY optics.

Direct C&H shotgun optic mount for Beretta A300, A400, and 1301 hosts with RMSc / Holosun K compact optics.

Spacer that converts the Dead Air P-Series booster mount to a fixed mount for non-tilting barrels.

Billet 6061 side Picatinny rails for the PS90 receiver, sold individually and intended to be installed in pairs.

Aftermarket dovetail optic mount that adapts the standard (non-T.O.R.O.) Taurus G2, G3, PT111 G2, PT140 G2, PT709, PT740, and TX22 to the Holosun K and Leupold DeltaPoint Pro footprint.

Dovetail optic mount for 1911 pistols with a GI/Government rear sight cut. Replaces the rear sight and presents an RMR / Holosun 507C footprint. Machined from 7075 aluminum with a progressive-taper dovetail.

Dovetail optic mount for 1911 pistols with a Bomar adjustable rear sight cut. Replaces the rear sight and presents an RMR / Holosun 507C footprint. 7075 aluminum with progressive-taper dovetail.

Dovetail optic mount for 1911 pistols with a Novak rear sight cut. Replaces the rear sight and presents an RMR / Holosun 507C footprint. Machined from 7075 aluminum with a progressive-taper dovetail for easier install. SKU 49511, 4.55 stars from 20 reviews.

2.91" optic centerline with an elevated Picatinny platform above the optic. One of the tallest published red dot mounts, built around night vision and gas masks.

The Hydra's 2.91" optic centerline without the accessory rail, at roughly half the price and 4.8 oz.

Fixed Aimpoint Micro mount built around Geissele's high-clamping-force rail interface, offered in absolute co-witness, lower 1/3, and 1.93" heights.

M2-specific 12-gauge forward mount with a reversible 1.75-inch Picatinny rail and two standard-web sling positions.

5.7-inch picatinny rail scope mount machined from 6061-T6 billet, drop-in fit for Ranch rifles

Top-rail accessory mount for the PS90 with two integrated QD sling sockets, billet 6061-T6 aluminum at 1.64 oz.

Drop-in low-profile optic mount that supports RMR, SRO, 507C, MRO, Aimpoint Micro, AEMS, Mini ACOG, 509T, Acro, and DPP footprints on the PS90.

Direct receiver-mount for SureFire Scout Pro / Mini / Micro / M140A / M340 / M640, billet 6061-T6 at 0.84 oz.

HBI-made direct optic mount for the standard P90/PS90, sold through Haga Defense with footprint-specific variants for RMR, Aimpoint Micro, Aimpoint Acro, and Holosun AEMS.

Factory EGW-made one-piece Picatinny base for the Henry Long Ranger.

Screw-on billet-aluminum lower rail attachment for the stock KS7, with no drilling required.

Low-profile factory adapter that mounts RMR-footprint Holosun 407C, 507C, 407COMP, 507COMP, and 508T optics to a standard Picatinny rail.

Tool-less M-LOK quick-detach mount for Garmin Xero C1 Pro and C2 chronographs, with a standard base and an XL option for thicker chassis rails.

Tool-less M-LOK quick-detach mount that presents a 45-degree offset Picatinny rail for a rail-clamp weapon light or accessory.

Tool-less M-LOK quick-detach base for the swiveling mount interface on SureFire Pro weapon lights.

Push-button QD Picatinny mount for ACRO-pattern enclosed dots at absolute co-witness height.

Push-button QD mount for Aimpoint PRO and CompM4 bodies at a 1.57-inch lower-third centerline.

Push-button QD mount for Aimpoint Micro-pattern optics at a 1.57-inch lower-third centerline.

Tool-less QD ACOG mount with forward and rearward optic positions for eye relief and BUIS clearance.

Push-button QD mount that sets a Trijicon MRO at a 1.57-inch lower-third centerline.

Factory 12-inch Picatinny rail and heat-shield kit that replaces the KS7 carry handle.

Proven cross-slot tactical rings for Picatinny rails, offered in machined steel or 7075-T6 aluminum.

Pivoting Picatinny optic mount for the Gen 2 Sub 2000 that lets the rifle still fold in half with a micro red dot attached. Gen 2 only, right-handed.

Five-slot aluminum adapter that converts an M-LOK mounting surface into a 1913 Picatinny rail.

M-LOK RRS/ARCA dovetail adapter family for tripod and precision support.

Full-length aluminum Picatinny rail that replaces the SKS dust cover and rear sight for a mount that holds zero.

True Picatinny riser that adds 0.625" of rise under any rail-mounted optic, in 5, 9, and 13 slot lengths.

Smooth-throwing QD LPVO mount well under premium QD pricing. Standard and high heights.

Tool-free QD Aimpoint Micro mount in low, co-witness, lower 1/3, and 2.26" night vision heights.

One-piece aluminum mount that clamps to the MP5 receiver and presents an Aimpoint T1/T2 footprint at absolute-cowitness height.

Receiver-length 20 MOA Picatinny base with an integral Tikka recoil-lug interface.

Ultralight 7075 rings with titanium hardware that pair Nightforce rigidity with backcountry-friendly weight.

Premium aftermarket optic cut system for 1911 pistols. Tapered dovetail cut with interchangeable billet steel plates. Swaps between iron sights and red dot optics in seconds with return to zero. Plates available for RMR, SRO, RMSc, ACRO, 509T, DPP, and Viper footprints. $350 for the cut plus $150 per plate.

Fixed Aimpoint Micro mount at a 2.26" optical centerline, the cheapest route to a true heads-up night vision height.

Low-profile machined Picatinny rail for pistol-caliber Henry Big Boy receivers.

Fixed red dot mount family for Aimpoint Micro, ACRO, and Trijicon MRO footprints in lower 1/3 and 1.93" heights.

12 o'clock piggyback red dot mount that bolts onto a 30mm or 34mm LPVO scope mount

Direct 23-gram Holosun 509T mount for 12-gauge Beretta A300 Patrol and 1301 shotguns with low co-witness.

Direct 23-gram ACRO/MPS mount for 12-gauge Beretta A300 Patrol and 1301 shotguns with factory-sight co-witness.

Direct 23-gram ACRO-footprint mount for the Beretta A300 20 Gauge that co-witnesses the factory sights.

The budget reliable Norotos lowering arm in the current dovetail configuration. Fits PVS-15/18/21/31-style dovetail devices, weighs 5.86 oz, and mounts to USGI 3-hole shrouds.

Modular full-length lower for factory side rails on listed Yugo/Serbian rifles, including the ZPAP M70.

Upper half of the RS Regulate AK-300 system for Aimpoint Micro-pattern optics with a removable base.

Spring-loaded 1/2x28 piston booster that lets a tilting-barrel 9mm pistol cycle reliably with the Obsidian 9 mounted.

Aluminum picatinny top rail with integrated T1 footprint for low-profile red dot mounting

Quick-detach Aimpoint Micro footprint mount in 1.42", 1.57", and 1.93" optical center heights.

Ultralight quick-detach LPVO mount with true return to zero. Premium machining and anodizing.

Tall 1.93-inch 30mm scope mount with dual ClickDrive clamps, No-Gap rings, and the LevelDrive leveling system.

Direct-to-receiver optic mount for Benelli tactical shotguns, sold as five footprint-specific SKUs rather than a plate system.

Direct-to-receiver optic mount for the Beretta 1301 Tactical and A300 Ultima, sold as three footprint-specific SKUs.

13-inch full-length scout rail machined from solid aluminum with a built-in Skinner Minimalist peep, so you keep a precise aperture even with a scout scope mounted forward.

Billet one-piece tactical mount with integrated level, built-in cant options, and seven accessory interfaces.

Titanium and aluminum NVG mount with push-button deploy. The premium Norotos alternative to the Wilcox G24, sold in horn or dovetail interface variants depending on the goggle.

Hinged railed dust-cover mount for the full-size Yugo rifles TWS assigns to SKU 33312.

Factory Trijicon dovetail mount for 1911 pistols with a Novak Low Mount dovetail cut. Steel construction replaces the rear sight and mounts any Trijicon RMR-footprint optic. SKU AC32058.

Low-profile gas-tube replacement rail for standard-length, standard-weight AK and AKM barrels without side gas-port holes.

Raises absolute co-witness rail-mounted red dots to Unity's 2.26" FAST optical centerline for heads-up shooting and passive aiming.

Dedicated 2.26-inch FAST mount for Holosun AEMS optics.

Lightweight 36° offset base that bolts onto a Unity FAST scope mount and takes FAST adapter plates

The $20 Picatinny riser, in 0.5", 0.75", 0.83", and 1.0" saddle heights and 3 or 13 slot lengths.

Precision-machined and matched-bore scope rings that mount large tactical optics without hand-lapping.

30mm one-piece Picatinny scope mount with a 1.54-inch centerline and Pro accessory ports.

Budget one-piece cantilever ring mount for 30mm LPVOs on flattop ARs. The value baseline that holds a usable zero.

Ultralight 7075 rings around 3.5 ounces that cover every common tube size for hunting and general precision.

Budget two-piece Picatinny rings with six-screw caps and an integrated anti-cant level indicator.

Lightweight full-length Picatinny rail for the Henry .45-70 lever gun.

Forward Picatinny lever rail plus a tritium-ready ghost-ring set that turns a Ruger-built Marlin into a scout-scope, red-dot, or iron-sight gun.

Front-position piggyback mount for an Aimpoint ACRO on a compatible ACOG.

Middle-position piggyback mount for an Aimpoint ACRO on a compatible ACOG.

Front-position piggyback mount for Aimpoint Micro-pattern optics on a compatible ACOG.

Middle-position piggyback mount for Aimpoint Micro-pattern optics on a compatible ACOG.

Standard-lever QD mount for Holosun AEMS optics at a 1.93-inch optical centerline.

Complete MICH helmet mount assembly from ATN. Shroud, lowering arm, and ATN 6015/PVS-14 mount interface in one kit for MICH-family helmet shells.

Complete PASGT helmet mount assembly from ATN. Mount, straps, and lowering arm in one kit for PASGT helmet setups using ATN 6015/PVS-14 night vision.

Weaver/Picatinny weapon mount for PVS-14 monoculars. Places the monocular behind a night-vision-compatible optic for weapon-mounted PVS-14 use.

Complete Condition One offset bundle with a 35° or 45° J-Arm and the Aimpoint ACRO footprint Micro Sight Mount

Complete Condition One offset bundle with a 35° or 45° J-Arm and the Aimpoint Micro T1/T2 footprint Micro Sight Mount

Complete Condition One offset bundle with a 35° or 45° J-Arm and the Leupold DeltaPoint Pro footprint Micro Sight Mount

Complete Condition One offset bundle with a 35° or 45° J-Arm and the Trijicon RMR footprint Micro Sight Mount

Full constriction that threads into the muzzle end of the SGN 20 Ti suppressor.

Improved Cylinder constriction that threads into the muzzle end of the SGN 20 Ti suppressor.

Modified constriction that threads into the muzzle end of the SGN 20 Ti suppressor.

Full constriction that threads into the muzzle end of the SGN 410 Ti suppressor.

Improved Cylinder constriction that threads into the muzzle end of the SGN 410 Ti suppressor.

Modified constriction that threads into the muzzle end of the SGN 410 Ti suppressor.

Factory long-action X-Lock base that adds a one-piece 20 MOA Picatinny rail to X-Bolt 2 rifles.

Factory X-Lock base-and-ring set for 30mm tube scopes on X-Bolt and X-Bolt 2 rifles.

Piggyback scope-tube mount for Aimpoint ACRO and C&H DUTY enclosed-emitter dots.

Piggyback scope-tube mount for RMR / Holosun C-footprint offset or top-mounted backup dots.

Piggyback scope-tube mount for Holosun K / RMSc compact backup dots.

Direct C&H shotgun optic mount for Benelli M2 and M4 hosts with RMSc / Holosun K compact optics.

Direct C&H Henry long-action lever-gun mount for Aimpoint ACRO and C&H DUTY optics.

Direct C&H Henry long-action lever-gun mount for RMR / Holosun C-footprint optics.

Direct C&H Henry long-action lever-gun mount for compact RMSc / Holosun K optics.

Direct C&H Henry short-action lever-gun mount for Aimpoint ACRO and C&H DUTY optics.

Direct C&H Henry short-action lever-gun mount for RMR / Holosun C-footprint optics.

Direct C&H Henry short-action lever-gun mount for compact RMSc / Holosun K optics.

Push-button QD 30mm scope mount with movable ring modules and a snag-free Picatinny clamp.

Push-button QD 34mm scope mount on the same one-piece Picatinny base as the 30mm SIDELOK.

Machined steel Picatinny rings in low, medium, and high heights for hunting and crossover rifles.

Extended mount for SureFire Scout Pro-style pivoting light bodies.

Extended weapon-light mount that pushes a Scout-pattern light forward of rail clutter.

Adapter rail that lets the Picatinny AFG-2 mount to M-LOK handguards.

Universal ring-style mount for handheld tactical lights on weapon rails.

Aluminum M-LOK to 1913 rail sections in 3, 5, 7, and 9-slot lengths.

M-LOK adapter for sling-stud mounted bipods.

Aluminum M-LOK cantilever section for rail-clamp lights and accessories.

Polymer M-LOK cantilever section for mounting rail-clamp lights or accessories.

Forward M-LOK cantilever mount for Scout-pattern weapon lights.

Budget ambidextrous M-LOK offset mount for rail-clamp weapon lights.

Aluminum M-LOK offset mount for lights or compact rail-mounted optics.

Polymer M-LOK to 1913 rail sections in 3, 5, 7, 9, and 11-slot lengths.

Replacement M-LOK hardware set for lost or damaged T-nuts.

M-LOK plate for mounting Insight PEQ pressure switches to a handguard.

M-LOK plate for mounting SureFire ST pressure pads to a handguard.

Adapter kit for using M-LOK accessories on legacy MOE handguards and forends.

Legacy MOE-slot cantilever rail for adding Picatinny light/accessory space.

Legacy MOE handguard light-mounting kit for adding illumination to older furniture.

Legacy MOE-slot polymer Picatinny rail sections in 7, 9, and 11-slot lengths.

Quick-release 17S adapter for RRS/ARCA and Picatinny rails.

Side-specific 1913 rail light mount that positions a weapon light forward and high.

Adapter rail that lets the Picatinny RVG mount to M-LOK handguards.

M-LOK wire-management kit for weapon-light and laser cables.

One-piece AK side-rail mount that carries its own 6.75 in 1913 rail, so no separate upper is needed to hold an optic.

Fixed 1.93-inch Picatinny mount cut for the Holosun AEMS footprint.

ClickDrive QD mount for the Holosun AEMS footprint at a 1.93-inch optical centerline.

Offset red-dot mount offered for several common pistol-optic footprints.

2.26-inch FAST mount for Aimpoint CompM4 and CompM4s optics, with support for legacy 30mm top-ring sights.

Flip-to-center magnifier mount at the 2.26" FAST height; stows the magnifier below the sight plane instead of swinging it off the side.

2.26-inch FAST mount for Primary Arms MicroPrism and other industry-standard mini-prism optics.

2.26-inch FAST base for RMR, DPP, ACRO, 509T, RMSc, and Holosun K adapter plates.

Dedicated 2.26-inch FAST mount for Trijicon MRO and MRO HD optics with an integrated adjustable rear sight.

30mm Pro ring-cap accessory for a DeltaPoint Pro-footprint dot above the scope.

34mm Pro ring-cap accessory for a DeltaPoint Pro-footprint dot above the scope.

Mounts a DeltaPoint Pro-footprint backup dot to the new Pro Cantilever body.

30mm one-piece Picatinny scope mount with a 1.93-inch centerline and Pro accessory ports.

34mm one-piece Picatinny scope mount with a 1.54-inch centerline and Pro accessory ports.

34mm one-piece Picatinny scope mount with a 1.93-inch centerline and Pro accessory ports.

30mm Pro ring-cap accessory with forward Picatinny space for a rail-mounted device.

34mm Pro ring-cap accessory with forward Picatinny space for a rail-mounted device.

Value-priced precision-machined scope rings covering 1-inch, 30mm, and 34mm tubes in four heights.

30mm top-cap rail for mounting the X4-LRF above a compatible X4-FCS, Geissele, or Reptilia LPVO mount.

34mm top-cap rail for mounting the X4-LRF above a compatible X4-FCS, Geissele, or Reptilia LPVO mount.

Integrated 34mm LPVO mount with an Applied Ballistics solver and a projected ballistic-compensated aimpoint.