A pocket multi-tool that reads, saves, and emulates sub-GHz radio, 125 kHz RFID, NFC, infrared, and iButton signals.

Flipper Zero is a toy-shaped tool for seeing and replaying the short-range signals around you. Its CC1101 sub-1 GHz transceiver works the bands garage openers, gate remotes, and wireless sensors use (315, 433, 868 or 915 MHz depending on region). A 125 kHz antenna reads, saves and emulates low-frequency access cards such as EM410x and HID Prox, and the NFC side reads and emulates MIFARE Classic, Ultralight and DESFire cards. An infrared transceiver learns and replays remotes, and an iButton contact handles 1-Wire keys.
The hardware is built for tinkering. Thirteen GPIO pins on 2.54 mm headers take add-on modules such as the Wi-Fi dev board, the firmware is open source, and a community app hub extends what it does. An STM32WB55 runs the show, Bluetooth LE 5.4 links it to the phone app, and a 1.4-inch 128x64 monochrome screen and five-way pad drive it standalone.
The 2,100 mAh battery is rated for up to 28 days, the body weighs 102 g, and USB-C handles charging and data. Budget for a microSD card: Flipper Zero requires one to operate, and it stores the signal and key library there.
Add the Flipper Zero to your build and see how it enhances your platform.