Labor Day gun deals are live through Monday. See the deals

Canik METE SFT optic footprint: what red dots fit

Canik METE SFT

The Canik METE SFT slide carries a co-witnessing optics-ready cut that Canik specifies for the Shield RMS and RMSc pattern, so RMSc-pattern dots bolt straight to the slide with nothing under them. That covers the Shield RMSc itself, the C&H Precision EDC, EDC Enclosed, Max, and HNT-R Max, the Osight K and SE, the Cyelee CAT EDG, the Gideon Judge II, Judge XL, and Valor Mini, the Swampfox Sentinel II, the SIG Romeo Zero Elite and ROMEO-X Compact, and the enclosed Vortex Defender-CCW. Everything on another pattern runs on a plate, and Calculated Kinetics builds the Canik METE DOGTAG family for exactly that, with RMR, 509T, and ACRO variants for a Trijicon RMR, Holosun 507C, 509T, Aimpoint ACRO, or Steiner MPS, and a micro variant for the Holosun 407K, 507K, and EPS.

Canik splits the METE SFT by serial number, and the split is the trap. Serials after 25CC08376 are specified with an RMR and RMS/RMSc optics footprint, while serials before that number are specified with an RMRcc and RMS/RMSc footprint. The RMS/RMSc half is constant across both, so a micro dot in that pattern is the safe buy either way, but the larger half is not, and an optic or plate chosen for one serial range is not automatically right for the other. Read the serial on the slide before ordering.

Optics that fit
57
No plate needed
20
Plate required
37
Footprints accepted
Trijicon RMR / Holosun 507CShield RMSc / Holosun KAimpoint ACROHolosun 509THolosun EPS
Open the interactive checker on the Canik METE SFT
Disclosure: This page contains affiliate links. We may earn a commission on purchases at no cost to you. Read the affiliate disclosure

Mounts directly (Shield RMSc footprint)(20)

These optics carry the Shield RMSc footprint the slide is cut for. Screws, recoil bosses, and pocket all line up, so they seat on the slide with no plate.

C&H Precision EDC red dot for Canik METE SFT
C&H Precision

C&H Precision EDC

$199.99EPS / KShield RMSc

Compact open-emitter carry optic on the RMSc footprint with red, green, and MRS variants

Check price
Osight K (RMSc 6 MOA Green) red dot for Canik METE SFT
Osight

Osight K (RMSc 6 MOA Green)

$169.99Shield RMSc

Green-dot version of the open-emitter RMSc Osight K, with a 6 MOA green dot, side-loading CR1620, and motion sensor activation.

Check price
Osight K (RMSc 6 MOA Open) red dot for Canik METE SFT
Osight

Osight K (RMSc 6 MOA Open)

$159.99Shield RMSc

Entry-level open-emitter RMSc red dot with a 6 MOA dot, side-loading CR1620, and motion sensor activation.

Check price
Osight SE Enclosed (2 MOA + 32 MOA Red MRS) red dot for Canik METE SFT
Osight

Osight SE Enclosed (2 MOA + 32 MOA Red MRS)

$199.99Shield RMSc

Enclosed-emitter red dot on the RMSc footprint with a switchable 2 MOA dot and 32 MOA circle, side-loading battery, and IPX7 sealing.

Check price
Osight SE Enclosed (6 MOA Green) red dot for Canik METE SFT
Osight

Osight SE Enclosed (6 MOA Green)

$199.99Shield RMSc

Enclosed-emitter green dot on the RMSc footprint with a side-loading battery and a 75,000-hour runtime, at a value price.

Check price
Osight SE Enclosed (6 MOA Red) red dot for Canik METE SFT
Osight

Osight SE Enclosed (6 MOA Red)

$179.99Shield RMSc

Enclosed-emitter 6 MOA red dot on the RMSc footprint with a side-loading battery, motion sensor, and IPX7 sealing for slim carry guns.

Check price
C&H Precision EDC Enclosed red dot for Canik METE SFT
C&H Precision

C&H Precision EDC Enclosed

$249.99EPS / KShield RMSc

Enclosed-emitter RMSc-footprint carry optic with a low-profile compact housing

Check price
C&H Precision Max red dot for Canik METE SFT
C&H Precision

C&H Precision Max

$339.99EPS / KShield RMSc

Large-window RMSc-footprint multi-reticle optic for compact pistols and shotgun plates

Check price
Cyelee CAT EDG red dot for Canik METE SFT
Cyelee Optics

Cyelee CAT EDG

$279.99Shield RMSc

One-ounce enclosed-emitter dot on the slim RMSc cut for carry slides

Check price
Gideon Optics Judge II red dot for Canik METE SFT
Gideon Optics

Gideon Optics Judge II

$229.99Shield RMSc

RMSc open-emitter carry dot with a protected 20mm window and side-loading CR1632.

Check price
Gideon Optics Judge XL red dot for Canik METE SFT
Gideon Optics

Gideon Optics Judge XL

$239.99Holosun KShield RMSc

Large-window 6 MOA dot for RMSc and Holosun K mounting patterns.

Check price
Gideon Optics Valor Mini red dot for Canik METE SFT
Gideon Optics

Gideon Optics Valor Mini

$299.99Shield RMSc

Enclosed 3 MOA RMSc optic with a side-loading battery and 6.25mm deck.

Check price
Osight S Enclosed (Magnetic Charging) red dot for Canik METE SFT
Osight

Osight S Enclosed (Magnetic Charging)

$249.99Shield RMSc

Enclosed-emitter RMSc red dot with a magnetic charging cover, OAL housing, and a 2 MOA + 32 MOA multi-reticle system.

Check price
SIG Romeo Zero Elite red dot for Canik METE SFT
SIG Sauer

SIG Romeo Zero Elite

$129.99Shield RMSc

Sub-half-ounce micro red dot on the Shield RMSc footprint for P365 and similar carry pistols

Check price
Swampfox Sentinel II red dot for Canik METE SFT
Swampfox

Swampfox Sentinel II

$249Shield RMSc

Mid-tier RMSc-footprint micro red dot with Shake N' Wake auto-on, recessed hood for lens protection, and a clean 3 MOA dot, $269 (red) or $299 with tritium.

Check price
Vector Optics Frenzy FLEX 24x29 (SCRD-C77) red dot for Canik METE SFT
Vector Optics

Vector Optics Frenzy FLEX 24x29 (SCRD-C77)

$229Shield RMSc

Large-window competition pistol dot with selectable 2 and 6 MOA reticles

Check price
Vortex Defender-CCW Enclosed Solar red dot for Canik METE SFT
Vortex

Vortex Defender-CCW Enclosed Solar

$259.49Shield RMSc

Closed emitter micro pistol optic with solar assist on the Shield RMSc footprint

Check price
C&H Precision HNT-R Max red dot for Canik METE SFT
C&H Precision

C&H Precision HNT-R Max

$399.99EPS / KShield RMSc

Camo RMSc-footprint hunting red dot for handguns, shotguns, and scout-style mounts

Check price
Shield RMSc 4 MOA (Glass Edition) red dot for Canik METE SFT
Shield Sights

Shield RMSc 4 MOA (Glass Edition)

$379.99Shield RMSc

The original RMSc that defined the slim-pistol footprint standard. UK-made glass-edition reflex sight with a 4 MOA dot, $379, the platonic Shield-cut optic.

Check price
SIG ROMEO-X Compact Enclosed red dot for Canik METE SFT
SIG Sauer

SIG ROMEO-X Compact Enclosed

$499.99Shield RMSc

SIG's enclosed-emitter pistol red dot on the RMSc footprint, with MOTAC motion activation and a side-loading CR1632.

Check price

Mounts with an adapter plate(37)

These optics use the same screw spacing but a different locating pattern from the Canik METE SFT slide cut, so they mount on a plate that bolts into the slide and presents the matching pattern to the optic.

Canik METE SFT optic fitment FAQ

What optic footprint does the Canik METE SFT use?

The Canik METE SFT slide carries a co-witnessing optics-ready cut that Canik specifies for the Shield RMS and RMSc pattern, so RMSc-pattern dots bolt straight to the slide with nothing under them. That covers the Shield RMSc itself, the C&H Precision EDC, EDC Enclosed, Max, and HNT-R Max, the Osight K and SE, the Cyelee CAT EDG, the Gideon Judge II, Judge XL, and Valor Mini, the Swampfox Sentinel II, the SIG Romeo Zero Elite and ROMEO-X Compact, and the enclosed Vortex Defender-CCW. Everything on another pattern runs on a plate, and Calculated Kinetics builds the Canik METE DOGTAG family for exactly that, with RMR, 509T, and ACRO variants for a Trijicon RMR, Holosun 507C, 509T, Aimpoint ACRO, or Steiner MPS, and a micro variant for the Holosun 407K, 507K, and EPS.

Do I need an adapter plate to mount a red dot on the Canik METE SFT?

Only for some optics. The Canik METE SFT slide is cut for the Shield RMSc footprint, so Shield RMSc optics bolt straight to the slide with no plate. Optics that do not share that locating pattern, the C&H Precision EDC-XL, Cyelee Chameleon SRS8 and Gideon Optics Rock among them, mount over an adapter plate that bolts into the slide first.

Does the Holosun 507C X2 fit a Canik METE SFT?

Yes, on a plate. The Holosun 507C X2 is a Trijicon RMR / Holosun 507C footprint optic, so it mounts on the Canik METE SFT using a matching plate such as the Calculated Kinetics Canik METE DOGTAG Optic Plate and Calculated Kinetics Canik METE DOGTAG RMR Optic Plate. Install the plate to the slide first, then the optic to the plate.

Does the Trijicon RMR Type 2 fit a Canik METE SFT?

Yes, on a plate. The Trijicon RMR Type 2 is a Trijicon RMR / Holosun 507C footprint optic, so it mounts on the Canik METE SFT using a matching plate such as the Calculated Kinetics Canik METE DOGTAG Optic Plate and Calculated Kinetics Canik METE DOGTAG RMR Optic Plate. Install the plate to the slide first, then the optic to the plate.

Does the Holosun 507K X2 fit a Canik METE SFT?

Yes, on a plate. The Holosun 507K X2 is a Shield RMSc / Holosun K footprint optic, so it mounts on the Canik METE SFT using the Calculated Kinetics Canik METE DOGTAG Optic Plate. Install the plate to the slide first, then the optic to the plate.

Does the Holosun EPS Carry fit a Canik METE SFT?

Yes, on a plate. The Holosun EPS Carry mounts on the Canik METE SFT using the Calculated Kinetics Canik METE DOGTAG Optic Plate. Install the plate to the slide first, then the optic to the plate.

Does my METE SFT serial number change which optics fit?

Yes, on the larger footprint. Canik states that serials after 25CC08376 carry an RMR and RMS/RMSc optics footprint, while serials before 25CC08376 carry an RMRcc and RMS/RMSc footprint. Micro dots in the RMS/RMSc pattern work on both, so the serial only decides which of the two larger footprints your slide takes.

Do Canik TP9SFx optic plates fit a METE SFT?

No. The TP9SFx uses its own numbered factory plates keyed to the TP9SFx slide, and the METE plate family is a separate part cut for the METE slide. Neither set is interchangeable with the other, which is consistent with the wider split between METE and older TP9 SF and SFX parts.

Should I replace the plate that came with the METE SFT?

For hard use, yes. The METE ships with factory optic bases in the case. Calculated Kinetics builds the METE DOGTAG plates in 7075 hard-anodized aluminum specifically as a replacement for those bases, in RMR, 509T, ACRO, and micro variants.

Keep reading

Optic footprints for other Canik models

Every pistol with a footprint page