What optic footprint does the CZ P-10 C OR use?
The CZ P-10 C OR is a plate system rather than a footprint. CZ mills a pocket into the OR slide, an adapter plate drops into that pocket, and the red dot bolts to the plate, so the plate you buy decides what fits. The factory plates that come with the pistol cover the RMR and Holosun 507C pattern, the Leupold DeltaPoint Pro, the Shield RMS, and the Docter and Venom pattern. Machined plates from C&H Precision, Night Fision, EGW, CZ Custom, and Calculated Kinetics take the same pocket further, reaching the Aimpoint ACRO, the Holosun 509T, the Holosun EPS and EPS Carry, the Holosun K series, the Trijicon RMRcc, and the SIG ROMEO-X PRO.
Do I need an adapter plate to mount a red dot on the CZ P-10 C OR?
Yes, for almost every optic. The CZ P-10 C OR mounts red dots through a plate system, so you bolt the plate matching your optic's footprint into the slide and then bolt the optic to the plate. Plates are available for the Trijicon RMR / Holosun 507C, Shield RMSc / Holosun K, Leupold DeltaPoint Pro, Aimpoint ACRO and Holosun 509T footprints.
Does the Holosun 507C X2 fit a CZ P-10 C OR?
Yes, on a plate. The Holosun 507C X2 is a Trijicon RMR / Holosun 507C footprint optic, so it mounts on the CZ P-10 C OR using a matching plate such as the Night Fision CZ P-10 OR RMR / 507C Plate and C&H Precision CZ P-10 V4 RMR / Holosun C Plate. Install the plate to the slide first, then the optic to the plate.
Does the Trijicon RMR Type 2 fit a CZ P-10 C OR?
Yes, on a plate. The Trijicon RMR Type 2 is a Trijicon RMR / Holosun 507C footprint optic, so it mounts on the CZ P-10 C OR using a matching plate such as the Night Fision CZ P-10 OR RMR / 507C Plate and C&H Precision CZ P-10 V4 RMR / Holosun C Plate. Install the plate to the slide first, then the optic to the plate.
Does the Holosun 507K X2 fit a CZ P-10 C OR?
Yes, on a plate. The Holosun 507K X2 is a Shield RMSc / Holosun K footprint optic, so it mounts on the CZ P-10 C OR using a matching plate such as the C&H Precision CZ P-10 V4 Trijicon RMRcc Plate and Calculated Kinetics CZ P-10 OR DOGTAG Optic Plate. Install the plate to the slide first, then the optic to the plate.
Does the Holosun EPS Carry fit a CZ P-10 C OR?
Yes, on a plate. The Holosun EPS Carry mounts on the CZ P-10 C OR using a matching plate such as the C&H Precision CZ P-10 V4 Trijicon RMRcc Plate and Calculated Kinetics CZ P-10 OR DOGTAG Optic Plate. Install the plate to the slide first, then the optic to the plate.
Do CZ P-10 OR plates fit the CZ Shadow 2 OR?
The two slides share the mounting interface, and plate makers sell single parts that cover both. EGW lists one optics-ready plate for the Shadow 2 OR, the Shadow 2 Compact, and the P-10 C, F, and S OR slides, and CZ Custom sells its RMR and Holosun plate as a P-10 and Shadow 2 OR part. Some plate lines are still named and stocked per model, so buy against the fitment list on the plate rather than assuming every part crosses.
Can I mount a red dot on a standard CZ P-10 C?
Not without machining. Only the OR models carry the milled pocket and screw holes, and no plate bolts to a solid slide. The two real paths are a milling service cutting a footprint into the slide, or buying an optics-ready slide.
Which plate does a Holosun 507K need on a P-10 C OR?
A K-pattern plate. C&H Precision's CZ P-10 V4 plate for the Holosun K, 407K, and 507K presents that pattern out of the OR pocket. The Holosun EPS and EPS Carry sit on a separate plate in the same line, so match the plate to the exact optic rather than to the brand.
Night Fision CZ P-10 OR RMR / 507C Plate$60
C&H Precision CZ P-10 V4 RMR / Holosun C Plate$79.99
C&H Precision CZ P-10 V4 RMR / Holosun C Steel Plate$79.99
C&H Precision CZ P-10 V4 COMP Protective Shroud Plate$79.99
EGW CZ P-10 OR RMR / Holosun C Plate$49.99
CZ Custom CZ P10 / Shadow 2 OR RMR / Holosun Plate$38.95
