Best CZ P10C Optic Plates 2026

The CZ P-10C OR does not use a direct slide cut. CZ mills a universal pocket into the slide and ships four factory plates that bridge that pocket to the optic footprint: one for RMR and Holosun 507C, one for DeltaPoint Pro, one for Shield RMS, and one for Docter/Venom. The system works for the four footprints it covers, but it leaves every modern enclosed-emitter optic out. The Holosun EPS, 509T, and Aimpoint ACRO, the Trijicon RMRcc, the SIG Romeo-X PRO, and the Steiner MPS all have footprints the factory set does not include. If your optic is any of those, you need an aftermarket plate before you can mount it.

C&H Precision's V4 MIL/LEO line is the answer. Twelve dedicated SKUs cover every footprint the factory set omits, each machined from 6061 aluminum with Type III hard anodize or mild steel for the enclosed-emitter duty plates. The patented 416 stainless T-nut design gives six to seven full revolutions of thread engagement, so the optic seats flush and recoil loads the plate body instead of the fasteners. The C&H RMR aluminum and steel plates cost the same $79.99, the 509T and ACRO steel plates drop to $67.99, and the Steiner MPS steel plate is the cheapest in the lineup at $67.49.

If you have not bought the optic yet, pick the footprint first and the plate second. Our broader CZ P-10C upgrade guide covers optics, lights, and triggers in one place, and the footprint-matching table below maps every common dot to the plate that fits it.

Aluminum is the right call for most shooters; steel is the duty pick for heavy enclosed emitters. C&H's aluminum plates (6061 with Type III hard anodize) are the only material carrying the dedicated Holosun K, EPS, RMRcc, and Romeo-X PRO cuts. They seat the optic flush and carry recoil across the plate body at a lighter weight than steel. C&H's steel plates (mild steel for the 509T, ACRO, and MPS) are the right call for heavy enclosed emitters on a duty or competition gun: the steel body resists recoil shear better than aluminum and holds up under the sustained fire schedule that walks aluminum-plate screws loose. The Night Fision plate steps up to 17-4 stainless at $60, and the EGW plate runs 7075-T6 aluminum, which is stronger than C&H's 6061 but only covers the RMR footprint.

On price, the CZ Custom aluminum RMR plate is the cheapest in the guide at $38.95, the CZ-USA factory DPP plate is $43.95, the EGW 7075-T6 RMR plate is $49.99, the Night Fision 17-4 steel RMR plate is $60, the C&H 509 ACSS aluminum plate drops to $64.95, the C&H steel enclosed-emitter plates (509T, ACRO, MPS) run $67.49 to $67.99, and the C&H aluminum footprint plates top the band at $79.99. The headline tradeoff: steel ends the recoil-walk problem for enclosed emitters, aluminum ends it for most shooters at a lighter weight, and the factory plate resets the countdown every range trip.