Dead Air P-Series Fixed Barrel Spacer

The P-Series fixed barrel spacer is the part you install in place of the spring-loaded piston when running a Dead Air P-Series can on a fixed-barrel host. On a tilting-barrel pistol the booster piston, a Nielsen device, decouples the can's mass so the action still cycles. A fixed barrel does not tilt, so that spring is unnecessary; the spacer drops into the P-Series booster assembly and converts it to a solid, fixed mount that locks the suppressor directly to the barrel.

Use it on PCCs, carbines, and any 9mm host with a non-reciprocating barrel where the booster would otherwise add a moving part with nothing to do. The rest of the Dead Air P-Series mount stays the same; you simply swap the piston for the spacer. It works across Dead Air's modular pistol-caliber lineup that runs the P-Series mount, including the Ghost-M, Wolf-9SD, and Wolfman.

At $45.19 it is an inexpensive way to make one P-Series can serve both tilting-barrel pistols and fixed-barrel carbines, keeping the piston for the pistol and the spacer for the carbine.