Scalarworks SYNC/02 Shotgun Mount (Beretta 1301 / A300)

The Scalarworks SYNC/02 is the Beretta member of the SYNC family, cut for the 1301 Tactical and the A300 Ultima. It is an integral mount that bolts to the receiver with two M4x0.7 nylon-patched fasteners and a supplied T10 Torx bit, so the optic sits directly on the gun with no rail section and no plate between it and the receiver.

Scalarworks sells three footprint SKUs and no adapters. SW2200 takes the Trijicon RMR family, which includes the RMR, RMR HD, SRO, and RCR along with the Holosun 407C, 507C, and 508. SW2210 takes the Aimpoint ACRO and Steiner MPS. SW2220 takes the Aimpoint Micro T-1 and T-2 and the dots that share that footprint, including the Holosun 403/503/515, Sig ROMEO4 and ROMEO5, and the Vortex Crossfire, SPARC II, and SPARC Solar. The RMR variant uses an o-ring on the mounting screw, so it seals without a separate plate.

Unlike the Benelli SYNC/01, all three SYNC/02 variants sit at the same lower-tenth height and co-witness with a 50-yard-or-longer zero. Weight runs 16 g for the RMR SKU, 17 g for the ACRO SKU, and 25 g for the Micro SKU.

The alternative on a 1301 is the Aridus CROM, which mounts by replacing the factory ghost ring rear sight and takes Aimpoint Micro footprint optics only. The CROM gets the dot lower; the SYNC/02 keeps the ghost ring and opens up the RMR and ACRO footprints.