KRISS Vector G3 Fixed Stock
Non-folding factory buttstock for Gen 3 KRISS Vectors with three fixed length-of-pull positions.
- Price
- $90
- Brand
- KRISS USA
- Category
- Stocks & Braces
Features
- •Three fixed length-of-pull positions
- •Slides on an aluminum guide rod
- •Aluminum clamp, polymer body
- •Two M5 mounting screws
Where to Buy
Compare current prices and availability from retailers we work with.
Price History
90-day low $89.99More PCC guides & articles
Guides
Overview
The KRISS Vector G3 Fixed Stock is the factory buttstock for shooters who want the Gen 3 stock interface without paying for the folding hinge. It carries the same aluminum clamp and two M5 screws as the G3 folding stock, so it drops onto the same Gen 3 receiver, and it lands about $40 under the folder at KRISS list pricing.
Length of pull runs three fixed positions along an aluminum guide rod. Changing position means pulling a screw and latch rather than pressing a button, which is the honest trade for the lower price: this is a set-and-forget stock, not one you adjust between strings for a plate carrier. The aluminum guide rod and clamp carry the load while the polymer body keeps weight off a platform that already sits rear-heavy.
Pick this over the G3 folding stock when the Vector lives in a safe or a long case and the fold buys you nothing. Pick the folder instead if storage length matters, since a Vector gains most of its packability from folding.
Key Features
- Factory KRISS fit for Gen 3 Vector receivers
- Three fixed length-of-pull positions on an aluminum guide rod
- Aluminum clamp and mount
- Two M5 mounting screws, same interface as the G3 folding stock
- Polymer body keeps rear weight down
- KVA-3FSBL01, $99.99 KRISS list
Pros
- +Factory fit and finish for Gen 3 Vectors
- +Meaningfully cheaper than the G3 folding stock
- +Aluminum guide rod and clamp rather than an all-polymer mount
- +Adjustable length of pull
Cons
- −Does not fold, so it gives up the Vector's biggest storage advantage
- −Position changes need a screw and latch removed, not a button press
- −Three fixed positions rather than infinite adjustment
- −Gen 3 receivers only; Gen 2.1 and older use different rear interfaces
Detailed Specifications
- type
- Fixed buttstock
- lengthOfPull
- Three fixed positions
- Material
- Aluminum clamp and guide rod, polymer body
- mount
- Gen 3 Vector, two M5 screws
- sku
- KVA-3FSBL01
- msrp
- $99.99
Similar Products
Compatible Platforms
Compatibility Tags
Build Your Custom Configuration
Add the KRISS Vector G3 Fixed Stock to your build and see how it enhances your platform.