Stocks & Braces

Compact carbine stock with friction lock and optional QD sling hardware

Wide body SOPMOD-style stock with storage

Streamlined MOE stock with improved cheek weld

Lightweight collapsible carbine stock with angled cheek weld and anti-rotation QD mount

Lightweight minimalist carbine stock

Short tactical-length pistol-grip stock for Beretta 1301 and A300 patrol shotguns.

Current Law Tactical GEN-S AR folding adapter with 17-4 stainless housing, DLC finish, and compact transport profile.

Purpose-built 10/22 Takedown stock that locks the barrel/forend into the buttstock for compact carry. Stores up to three 10-round magazines on board.

Nine-ounce skeletonized aluminum buttstock for MDT XTN chassis interfaces, upgradeable with a cheek riser and length-of-pull spacers.

Adjustable pistol brace with mil-spec compatibility

Narrowest A-Series brace at 1.6 in wide, with a full rubber arm cuff and 5-position adjustment

Bidirectional folding stock for any 1913 Picatinny rear interface; folds left or right without flipping the hinge

Solid Claro walnut fixed stock for A2 rifle-length receiver extensions, 0.84 lb

Lightweight fixed-length stock with SOPMOD-style cheek

Lightweight precision rifle stock

Drop-in replacement stock for 12-gauge Mossberg 500, 590, 590A1, and Maverick 88 shotguns with adjustable length-of-pull and adjustable comb height for optic use.

Improved pistol brace with enhanced stability

5-position adjustable pistol brace with integral QD sling socket and improved ergonomics

1913 left-folding stabilizer with steel hinge and polymer end pieces. Springfield sells the Kuna KN9069B-FSA variant with a Strike Industries FSA brace.

Six-position side-folding tactical stock with pistol grip and Scorpion recoil pad for Mini-14/30

Hardwood laminated 10/22 stock with adjustable LOP and comb. Bull-barrel channel only; 30+ finish color options.

Cushioned rubber over-molded pistol grip for Mossberg 500/590/835/Maverick 88 and Shockwave with improved recoil absorption and wet-weather traction.

Rear plate that gives an ARIC-equipped AR a 1913 Picatinny interface, so it takes 1913 stocks and braces and fires folded or bare.

Lightweight polymer drop-in stock for the short-action Ruger American, with an aluminum bedding block and an AICS bolt-action magazine well.

Drop-in polymer stock for the Ruger 10/22 with adjustable LOP, comb height, and a reversible barrel tray for both sporter and bull profiles.

Fixed polymer stock for stamped AKM fixed-rear-trunnion rifles.

Drop-in replacement stock for the Remington 870 with adjustable length-of-pull and adjustable comb height for optic use. Magpul model MAG460.

Magpul's universal 1913 stock with reversible left/right fold, adjustable cheek riser, and 5° drop.

Folding polymer AK stock for standard stamped AKM fixed-stock rear trunnions.

Ultra-compact Gen 6 PDW brace system with integrated buffer. 5.375" collapsed length and 9.24" extended length.

One- or two-way-locking hinge for most bolt-action chassis with an AR-style fixed or carbine stock interface.

Ultra-lightweight minimalist carbine stock

Four-position collapsible stock with pistol grip and full-length aluminum Picatinny top rail

Carbon-fiber-reinforced polymer precision stock with adjustable cheek riser and full-length aluminum top rail

Classic walnut-and-steel side-folding stock for Ruger Mini-14 and Mini Thirty rifles.

Folding 6061-T6 aluminum chassis for standard Ruger 10/22 receivers with adjustable stock fit.

Universal 1913 left-folding pistol brace with polymer strut and steel hinge. The default 1913 brace.

Honey Badger-inspired AR brace with compact PDW rails and included buffer system.

Factory SIG SL-K folding-and-telescoping stock for the MCX and MPX, the SBR-conversion stock most MPX owners install in place of the brace

Folding 1913-to-buffer-tube adapter. Lets you run any standard AR carbine stock on a 1913 host.

Merged chassis and trigger assembly for the Ruger 10/22 that takes AR grips and Picatinny stocks or braces, with the full Manticore fire control pre-installed.

Aluminum end-plate adapter that replaces the B&T APC proprietary rear interface with a 1913 Picatinny rail, opening the universal brace and stock catalog.

A 3.6-ounce folding brace that bolts directly to the TP9 factory hinge without an adapter.

JAKL-specific left-folding stabilizing brace with a 17-4 stainless steel hinge and glass-filled polymer body.

Kuna-specific folding brace with 17-4 stainless steel hinge and 30% glass-filled polymer body.

Premium 7-position 1913 folding brace with adjustable cheek riser and metal internals.

Aluminum rear adapter that gives a bare MPA Defender a mounting point for a brace or stock.

Six-position side-folding tactical stock with pistol grip and Scorpion recoil pad for the SKS

Factory telescopic GHM9/45 brace assembly for a Gear Head Works Tailhook MOD1, sold without the Tailhook.

Factory three-position telescopic stock assembly for the GHM9 and GHM45, part BT-20506.

Factory SPC9 brace-adapter end cap, part BT-200615, for the platform-specific rear assembly.

Factory side-folding polymer stock kit with hinge hardware for the TP9 and MP9 family.

Stabilizing-brace variant of the ACX 1913 stock with the same all-aluminum chassis and 9-position adjustment.

All-aluminum 9-position 1913 collapsible stock with ambidextrous tail hook and QD socket.

Dedicated Gen 2 short-action hardwood inlet with adjustable comb and length of pull that requires lug bedding.

Complete short-cycle AR folding system offered with rifle-caliber or 9mm carrier hardware and verified fire-while-folded operation.

F5 ACR-style folding stock system with CZ Bren 2 adapter and adjustable comb/length settings.

Dedicated left-folding adjustable stock for the B&T APC9 with a 6061 billet B&T adapter, fully adjustable for comb height and length of pull.

Telescoping, left-side-folding modular stock for the PSA JAKL, shipping with the JAKL-specific rear adapter.

Rigid hook-style brace with a fold-out support arm; telescopes to 12.75 in length of pull on a carbine buffer.

Factory side-folding SBR stock for Grand Power Stribog. Steel hinge, fixed length of pull, factory fit and finish at brace pricing.

Drop-in PS90 cheek riser that adds approximately 1 inch of comb height for proper alignment with rail-mounted optics, includes integrated QD and M-LOK.

Magpul Zhukov-S folding stock with a billet adapter that mounts directly to the Scorpion trunnion, removing 1.7 inches of length over universal AK adapters.

Billet aluminum folding adapter that lets hinge-mount Gen 1 and early Gen 2 Vectors run any AR-pattern stock or brace.

6061-T6 trunnion-to-1913 adapter with integrated QD sling socket. Accepts any 1913-interface stock or brace.

Magpul UCS paired with an HBI-machined 6061-T6 adapter that replaces the Kuna's 1913 interface at the trunnion.

Low-profile billet 6061 aluminum 1913 Picatinny adapter that mounts any 1913 stock or brace directly to the Stribog upper receiver. Includes integrated QD socket.

Cushioned rubber over-molded pistol grip for Remington 870 and TAC-14 with improved recoil absorption and wet-weather traction.

Rear-trunnion adapter that bolts to a stamped AKM receiver and presents a 1913 Picatinny rail for any universal folding 1913 brace.

Complete short buffer system and blade brace that extends only 5.25 in behind the receiver while still running a mil-spec BCG.

4.1 oz glass-reinforced fin brace that slips onto any mil-spec buffer tube and locks with a finger lever.

All-metal-internals replacement SCAR stock with a three-position adjustable cheek riser and steel hinge.

Thicker, softer replacement butt-pad that KelTec lists for both the KSG and KS7 shotguns.

Factory ambidextrous folding buttstock for Gen 3 KRISS Vectors that mounts to the 1913 Picatinny rear rail.

Full-featured storage stock (heavy)

Lightweight version of ACS with storage

Basic polymer carbine stock

Non-adjustable fixed position stock

Slim Line storage stock with battery tubes and improved cheek weld

Purpose-built Ruger PC Carbine takedown stock that locks the barrel assembly into the stock for compact transport.

Full-featured precision rifle stock (heavy)

Ambidextrous collapsing MP5 stock with an integrated QD sling socket, the value retractable stock for a full-size SBR.

Storage-capable stock with enhanced cheek weld

Premium adjustable stock with integrated buffer tube (heavy)

Aluminum and polymer buttpad that shortens the Hellion's length of pull by 1 inch and adds a curved profile for better shoulder index.

Aluminum and rubber buttpad that shortens the X95's length of pull by an inch while keeping the rifle legal at 26 inches.

Gen 7 ultra-compact PDW brace with proprietary buffer; adds just 4 inches collapsed and weighs 14.6 oz.

Metal Ruger 10/22 chassis with an aluminum bedding block and a free-floated barrel channel.

Single-hinge steel folding adapter in XTN-to-XTN and Picatinny-to-XTN interfaces, adding roughly 1.13 in of length of pull.

Pistol-grip tactical shotgun stock with short 12.5-inch length-of-pull for Mossberg 500/590 defensive setups.

Pistol-grip tactical shotgun stock with short 12.5-inch length-of-pull, designed for shooters running plate carriers or compressed indoor positions on the Remington 870.

12.5-inch pistol-grip stock for classic 12-gauge Benelli M2 shotguns, with a cheek riser and Limbsaver recoil pad.

Tang-compatible stamped-AKM rear adapter that adds a 1913 rail below the factory tang for a separate fixed or folding 1913 stock.

6061 aluminum fixed-barrel 10/22 chassis with M-LOK slots and an AR-style rear furniture interface.

6061 aluminum chassis for Ruger PC Carbine takedown models with AR stock or Picatinny stock interface options.

Drop-in adjustable precision stock that converts an M1A into a modern chassis-style rifle without permanent gunsmithing.

Drop-in SKS chassis with adjustable length of pull, cheek riser, AR-style pistol grip, and QD sling points

Aluminum stock adapter and Magpul Zhukov-S folding stock kit for CZ Scorpion EVO 3 S1

The aluminum Enhanced Battle Rifle chassis that turns an M1A into a modular, rail-laden precision platform; the chassis the U.S. military fielded as the Mk 14 EBR.

Bren 2-specific side-folding pistol stabilizing brace developed in collaboration with CZ-USA.

Aluminum-strut variant of the FS1913. More rigid, 3 oz heavier, $40 more, same 1913 mount.

Fixed-position polymer brace that slides over an AR pistol buffer tube for the lightest, simplest setup.

Side-folding stabilizing brace for single-pin MP5-pattern pistols, adding a shoulderable rear without SBR paperwork.

Direct-fit, right-folding brace for every CZ Scorpion generation, including the Scorpion 3+.

Dedicated AK pistol brace that bolts to a standard stamped rear trunnion. The default Draco brace.

Triangle-profile 1913 folding brace inspired by the HK33 stock. Flatter cheek weld than the FS1913.

SLS nylon low-profile stock that eliminates the factory length-of-pull adjustment for a cleaner fixed-position shoulder mount.

Brace variant of the FSA Dual Folder. Same bidirectional steel hinge and aluminum body, swaps buttplate for soft cuff.

Stock variant of the FSA Single Folder. Same steel hinge and 1913 mount, swaps brace cuff for a buttplate.

Budget all-polymer 1913 folding brace. Same chassis as the polymer FSA stock, with a soft cuff for pistol-legal builds.

Budget all-polymer 1913 folding stock from Strike Industries. Cheapest universal 1913 stock at this build.

Six-ounce 7075-aluminum AR folding adapter offered in left- and right-folding versions for .223/5.56 through .308 platforms and most 9mm.

Right-folding CZ Scorpion Gen 2 adapter with standard receiver-extension threads for an AR-style tube and rear assembly.

1913 rear-interface hinge that accepts a standard AR receiver extension and is explicitly rated to fire folded on bufferless hosts.

4140-steel AR folding adapter with adjustable hinge tension and left- or right-folding configurations.

Reinforced polymer chassis for the Ruger PC Carbine and PC Charger that takes AR grips and mil-spec buffer tubes, with a trigger-finger magazine release, flared magwell, and hiveGrip included.

Featureless stock kit that replaces both the pistol grip and the telescoping stock with a fixed rifle-grasp shell.

American walnut Marlin buttstock with a five-position adjustable comb, the upgrade that gives a lever gun an optic-height cheek weld without going synthetic.

American walnut stock and handguard set with an adjustable cheek riser for Henry lever guns.

Premium walnut precision stock with an aluminum chassis core, covering Ruger American Gen I and Gen II short actions except the Ranch sub-series.

Claro walnut and anodized aluminum collapsible stock for mil-spec carbine tubes

Plum composite drop-in replacement for the factory fixed AK stock, with a 5-position length-of-pull adjustment, an optic rail cutout, and QD plus fixed sling mounts.

Complete mil-spec furniture upgrade with adjustable stock, pistol grip, and vertical grip

Press-fit adapter that converts the Scorpion's proprietary trunnion into a universal 1913 Picatinny rear interface.

Factory hinge-mount folding stock for Gen 1 and pre-2017 Gen 2 Vectors, cutting about 9.5 inches of overall length.

Non-folding factory buttstock for Gen 3 KRISS Vectors with three fixed length-of-pull positions.

Factory three-position telescoping folding stock for post-2017 Gen 2.1 Vectors, with dual QD sling mounts.

Dual-tension carbine stock that merges SL and CTR geometry for tighter lockup

Dual-tension precision carbine stock with PR-style comb support

Lightweight precision-style MOE stock for Recce and SPR carbines

Fixed rifle-length MOE stock for A1/A2 receiver-extension builds

Reverse-lever MOE carbine stock made for adjustment while shouldered

Compact Slim Line stock for PDWs, SBRs, and short length-of-pull builds

Ultra-compact Slim Line stock optimized for shorter PDW receiver extensions

Tool-less-install MOE carbine stock for fast stock swaps on mil-spec tubes

Lightweight fixed-length 10/22 stock with interchangeable trays for factory and .920 bull barrels plus bottom M-LOK slots.

Four-position collapsible PDW stock dedicated to the new CZ Scorpion 3 and 3+ generation

Two-pound field stock for Ruger-style fixed-receiver 10/22 rifles with glass-filled front bedding and a rear aluminum anchor.

Rigid fiberglass-composite stock for Ruger-style fixed-receiver 10/22 rifles with front-and-rear aluminum action anchoring.