Leatherman Bit Kit

The Leatherman Bit Kit is the accessory that turns a multi-tool from a curiosity into something you actually reach for. A bare Leatherman bit driver ships with two flat-and-Phillips bits; the Bit Kit adds 21 double-ended bits, 42 working tips in all, covering hex, Torx, Phillips, square, slotted, and metric hex sizes. For a shooter that means the right driver for optic ring and base screws, grip and stock hardware, and the dozens of small fasteners on a rifle without dragging a full bench kit to the range.

The bits are flat-ground to seat in the proprietary Leatherman driver slot and store in a thin case that slips into a range bag or glovebox. Compatibility covers the bit-driver tools: Charge+, Charge+ TTi, Wave+, Surge, MUT, Skeletool, Supertool 300M, and the Removable Bit Driver. The eyeglass-screwdriver bit handles the tiny screws that strip under a normal driver.

This is the highest-value buy for anyone who already owns a Leatherman with a bit driver. It is cheap, it lives in the kit, and it removes the most common reason people leave the multi-tool at home: the stock driver alone is not enough.