New merch store is live. Stickers, patches, and pin-up art. Shop now
Glock 19X Upgrades: Optics, Triggers, Lights & Barrels Ranked header image
Gear
May 6, 2026
Glock 19X Upgrades: Optics, Triggers, Lights & Barrels Ranked

Best Glock 19X upgrades for 2026. Covers both factory variants: original 19X (G19-length slide, no MOS) and Davidson's Exclusive 19X MOS Threaded (G17-length, factory optic-cut). Holosun 507C ($309), Modlite PL350 ($365), SureFire X300U ($299), Timney Alpha ($150), Talon Grips ($22), TTI +5 base pads ($42), and aftermarket optic-cut slides for non-MOS owners.

Glock 19X Upgrades: Optics, Triggers, Lights & Barrels Ranked

The Glock 19X is the FDE Coyote crossover Glock: full-size G17 Gen5 frame for a complete firing grip, paired with the same G19-length slide used on the smaller compact. Two factory variants ship today and they upgrade differently. The original 2018 19X has a 4.02-inch non-threaded barrel and no MOS optic cut. The Davidson's Exclusive 19X MOS Threaded (2024) keeps the G19-length slide but adds a 4.52-inch threaded Marksman Barrel that protrudes past the muzzle, plus a factory MOS cut and AmeriGlo suppressor-height irons. Slide-side aftermarket parts (slides, barrels) are G19-fit on both variants. This guide ranks the best Glock 19X upgrades across optics, triggers, lights, barrels, sights, mags, frame mods, and aftermarket optic-cut slides.

By AB|Last reviewed May 2026

The Two Glock 19X Variants: What Actually Fits

Identify your 19X before you spend a dollar on slide-side parts. The frame is the same Gen5 G17 across both variants, so triggers, mags, magwells, mag catches, Talon Grips, and the Striker Control Device cross-fit. Slides and barrels do not.

SpecOriginal 19X (2018)Davidson's 19X MOS (2024)
SlideG19-lengthG19-length
Barrel4.02", non-threaded (flush)4.52", 1/2x28 threaded (protrudes past slide)
MOS CutNo (irons only)Yes (factory MOS plate set)
SightsGlock factory standardAmeriGlo suppressor-height tritium
FinishFDE CoyoteFDE nPVD
FrameG17 Gen5 (lanyard loop, FBI mag release)G17 Gen5 (lanyard loop, FBI mag release)
Mags Included1x 17rd + 2x G17+2 (19rd)1x 17rd + 2x G17+2 (19rd)
Buy For Aftermarket Slide / BarrelG19-lengthG19-length (factory barrel already threaded)

Critical mistake to avoid: Buying a G17-length barrel or slide for any 19X. Both 19X variants use the G19-length slide pattern, so G17-length slide-side parts do not fit either gun. Buy G19-length aftermarket slides and G19-fit threaded barrels regardless of which 19X you own. The Davidson's 19X MOS Threaded ships at $819.89 MSRP and is the only 19X variant with a factory optic cut; its 4.52-inch threaded Marksman Barrel protrudes past the same G19-length slide the original 19X uses. For shared parts, the G17 Gen5 path applies. See our Glock 17 upgrades guide for the trigger and frame product rationale, and our Glock 19 upgrades guide for G19-length slide and barrel context. Build your 19X loadout in our rifle builder.

Glock 19X Upgrade Priority: What to Buy First

The order that gives you the most capability per dollar on a 19X. Skip cosmetic mods until every priority above is handled. If you have the original non-MOS 19X, swap priorities 2 and 3: buy the optic-cut slide before the optic itself.

PriorityUpgradeCostImpact
1Talon Grips + extra G17 mags$22 + $75Cheapest meaningful gain, mag stack first
2Optic-cut slide (original 19X only)$229-$549Required before any optic on a non-MOS 19X
3Optic on MOS plate$309-$599Faster acquisition, foundation of every modern carry build
4Weapon Light$125-$365Non-negotiable on a defensive 19X
5Trigger$90-$150Single biggest shootability gain
6Suppressor-height sights$139Co-witness redundancy (skip on Davidson's MOS, already included)
7Striker Control Device$80Holstering safety check for AIWB carry
8Barrel (suppressor or comp)$189-$389G19-length for both variants (Davidson's MOS already threaded from factory)
9Magwell / TTI base pads$42-$99Faster reloads, +5 capacity per mag

Key insight:The cheapest path to a fully-modern 19X depends on your variant. If you have the Davidson's MOS, mount an optic to the factory plate that came with the gun, suppressor-height sights are already installed, and the threaded barrel is ready for a 9mm can. If you have the original 19X, your first slide-side dollar buys an optic-cut slide. For a deeper breakdown of pistol optic footprints, see our best pistol red dot guide. If you are still weighing the 19X against a P320, M&P 2.0 5", or Walther PDP F-Series, our best full-size 9mm pistols guide ranks the field.

Best Optics for Glock 19X

The Davidson's Exclusive 19X MOS Threaded ships with the factory MOS plate set, RMR-pattern dots like the 507C and RMR Type 2 mount directly without a separate plate; ACRO needs the dedicated MOS plate. For the original non-MOS 19X, an aftermarket optic-cut slide is required first, see the slides section below. For broader pistol optic footprint guidance, see our best pistol red dot guide.

1

Holosun 507C X2

Best Overall, Multi-reticle with solar failsafe at a fair price

$232.99
View at OpticsPlanet
2 MOA / 32 MOARMR Footprint
  • +Multi-reticle, dot, circle, or both
  • +Solar failsafe on top of the battery
  • +Side-loading battery without removing the optic
  • Open emitter picks up lint over time
  • Slight green tint to the glass
  • Requires aftermarket optic-cut slide on the original 19X
Reticle: 2 MOA / 32 MOA / BothFootprint: RMRBattery: 50,000 hrs + solar
2

Trijicon RMR Type 2

Best Duty, Forged housing with proven duty track record

$549.99
View at OpticsPlanet
3.25 MOADuty Standard
  • +Proven durability record on duty Glocks
  • +Forged 7075-T6 aluminum housing
  • +Only 1.2 oz
  • Top-load battery requires removal to swap
  • No multi-reticle option
  • Premium price
Reticle: 3.25 MOA or 6.5 MOAFootprint: RMRWeight: 1.2 oz
3

Aimpoint ACRO P-2

Best Enclosed, Sealed emitter with Aimpoint reliability

$617.00
View at OpticsPlanet
Enclosed Emitter50,000 hr battery
  • +Enclosed emitter stays on through debris and lint
  • +50,000 hour battery life
  • +Aimpoint durability record
  • ACRO footprint requires a separate MOS plate
  • Heaviest of the three picks
  • Premium pricing
Reticle: 3.5 MOAFootprint: ACRO (plate required)Battery: 50,000 hr CR2032

Best Glock 19X Triggers

The 19X uses the Gen5 trigger group, identical to the G17 and G19 Gen5 fire control. Every drop-in Gen5 Glock trigger fits. The factory 19X trigger is the gun's biggest weakness, mushy wall and a long reset, so the trigger is the single best shootability dollar you can spend after the optic and light. For cross-model trigger rankings (Glock Performance Trigger, Overwatch DAT, Timney Alpha, Apex AEK), see our Best Glock Triggers 2026 guide.

1

Timney Alpha Competition Trigger

Best Overall, Crisp 3 lb flat-face with zero fitting

$126.79
View at OpticsPlanet
3 lb PullDrop-In
  • +True drop-in, no fitting or modification
  • +Crisp 3 lb break with a clean wall
  • +Short, tactile reset
  • Premium price for a trigger
  • Too light for some duty carry roles
  • Flat face is a personal preference
Pull Weight: 3 lbType: Flat-face, single-stageInstall: Drop-in, no fitting
2

Overwatch Precision DAT Flat Trigger

Best Flat-Face Shoe, NP3-coated with factory bar compatibility

$100.09
View at OpticsPlanet
~5 lb PullFlat-Face
  • +Flat face for consistent pull
  • +NP3 coating is self-lubricating
  • +Works with the factory trigger bar
  • Trigger shoe only, not a full kit
  • Requires disassembly for install
  • Improvement is more subtle than full kits
Pull Weight: ~5 lbType: Flat-face, NP3-coatedInstall: Trigger shoe swap
3

Apex Tactical Action Enhancement Kit

Best Value, Factory feel improved with cleaner break

$128.25
View at OpticsPlanet
~5.5 lb PullBest Value
  • +Significant improvement over the stock trigger
  • +Keeps all factory safety mechanisms
  • +Under $100
  • Less dramatic than a full competition trigger
  • Needs a basic punch for install
  • Heavier than dedicated competition triggers
Pull Weight: ~5.5 lb (reduced from ~6.5)Type: Enhanced OEM-styleInstall: Drop-in with punch

Best Weapon Lights for Glock 19X

A weapon light is non-negotiable on a defensive 19X. The full-size G17 frame and rail accommodate full-size lights cleanly. The SureFire X300U-A is the duty standard. The Modlite PL350 PLHv2 is the long-throw upgrade for outdoor work, 54,000 candela versus the X300U's 11,300. If you carry concealed, the Streamlight TLR-7A keeps the package smaller. For lumens-vs-candela tradeoffs and broader pistol light comparisons, see our best pistol lights guide.

1

SureFire X300U-A

Best Overall, Maximum output with broad holster support

$329.99
View at OpticsPlanet
1,000 LumensDuty Standard
  • +1,000 lumens with tight throw
  • +Sits cleanly on the 19X full-size rail
  • +Ambidextrous toggles
  • Extends slightly past the original 19X muzzle
  • Heavier than compact alternatives
  • Premium pricing
Output: 1,000 lumens / 11,300 cdRuntime: 1.25 hoursWeight: 4.0 oz
2

Modlite PL350 PLHv2

Best Throw, Highest candela in the category for outdoor work

$365
View at OpticsPlanet
54,000 cdPremium
  • +Class-leading candela for long-distance identification
  • +Modular head and body system
  • +Holster support has caught up (PHLster, T.Rex, JM Custom)
  • Highest price in the category
  • Smaller holster ecosystem than X300/TLR-1
  • Switch geometry is a personal preference
Output: 1,350 lumens / 54,000 cd (PLHv2)Battery: 18350 rechargeableModularity: Swap heads (PLHv2 / OKW / 18650)
3

Streamlight TLR-1 HL

Best Value, Duty-grade output without the SureFire price

$214.49
View at OpticsPlanet
1,000 LumensBest Value
  • +1,000 lumens at a Streamlight price
  • +Highest candela for the price
  • +Rail clamp is rock solid on Gen5 frames
  • Switch is less refined than X300
  • Slightly bulkier than TLR-7A
  • No factory strobe on the basic model
Output: 1,000 lumens / 15,000 cdRuntime: 1.75 hoursWeight: 4.18 oz
4

Streamlight TLR-7A

Best Compact, Flush-fit light for concealed 19X carry

$179.49
View at OpticsPlanet
500 LumensCompact
  • +Flush with the original 19X G19-length slide
  • +Rear-switch options for easy activation
  • +500 lumens is sufficient for defensive use
  • Half the output of full-size lights
  • No strobe on standard model
  • Battery life shorter than CR123A lights
Output: 500 lumens / 5,000 cdRuntime: 1.5 hoursWeight: 2.4 oz

Best Barrels for Glock 19X (G19-Length, Both Variants)

Both 19X variants share the G19-length slide, so G19-fit barrels cover both guns. Buy G19-length, never G17-length. The Radian RAMJET G19 + AFTERBURNER pairs a matched barrel with an integrated comp; the SilencerCo G19 threaded barrel is the right call for suppressor work on a non-threaded original 19X; the Faxon G19 match barrel is the best-value accuracy upgrade. Davidson's 19X MOS owners already have a match-grade 4.52-inch threaded Marksman barrel from the factory and only need an aftermarket barrel if swapping to a comp system. For cross-model match, threaded, and integrated comp rankings, see our Best Glock Barrels 2026 guide.

1

Radian Weapons RAMJET + AFTERBURNER (G19-fit)

Best Overall, Matched barrel and comp for max recoil reduction on either 19X

$369.99
View at OpticsPlanet
Barrel + CompPremium
  • +Noticeable muzzle-rise reduction
  • +No threaded muzzle required
  • +Drop-in for G19 slides and both 19X variants
  • Premium pricing
  • Added noise and blast
  • Not suppressor-ready
Type: Barrel + integrated compThreads: None (integrated)Gen: Gen5 G19 / 19X (both variants)
2

SilencerCo Threaded Barrel (G19-fit)

Best Suppressor Host, Match-grade G19-length threaded barrel for the original 19X

$143.65
View at OpticsPlanet
1/2x28 ThreadsSuppressor-Ready
  • +1/2x28 threads for any common 9mm can
  • +Match-grade accuracy improvement
  • +Black nitride finish
  • Added length kills most stock 19X holsters
  • Thread protector can loosen under use
  • Need taller sights to index past the can
Threads: 1/2x28Finish: Black nitrideGen: Gen3-5 G19/19X
3

Faxon Firearms Flame Fluted Match Barrel (G19-fit)

Best Value, Match accuracy with flame-fluted weight savings for the original 19X

$111.00
View at OpticsPlanet
416R StainlessBest Value
  • +Visible accuracy bump over OEM
  • +Conventional rifling runs lead cast bullets
  • +Threaded and non-threaded variants
  • Fluting is cosmetic preference
  • Some lots run a tight chamber
  • Finish shows wear on high-round guns
Material: 416R stainless steelStyle: Flame flutedGen: Gen3-5 G19/19X

Best Glock 19X Night Sights

Glock dovetails are universal across the G17, G19, G45, and 19X, so every Glock-pattern sight set fits. The Davidson's 19X MOS already ships with AmeriGlo suppressor-height tritium, so most owners can skip this category. The original 19X owner decision is height. If you added an aftermarket optic-cut slide, run suppressor-height sights from Night Fision so the irons co-witness through the glass. If you stayed iron-only, the Trijicon HD XR or AmeriGlo CAP gives you the best front-sight pickup at standard height.

1

Trijicon HD XR Night Sights

Best Iron-Only, Fast front pickup without losing distance precision

$159.99
View at OpticsPlanet
TritiumNarrow Front
  • +Bright front sight in any light
  • +Narrow front post helps past 15 yards
  • +Proven Trijicon tritium quality
  • Standard height, will not co-witness through an optic
  • Premium price for iron sights
  • Front ring color is a personal preference
Type: Tritium front and rearFront Ring: PhotoluminescentFront Post: Narrow (0.122 in)
2

Night Fision Optics-Ready Night Sights

Best for Red Dot, Irons that co-witness through RMR-footprint optics

$101.79
View at OpticsPlanet
Suppressor HeightCo-Witness
  • +Co-witnesses through most RMR-footprint optics
  • +Tritium in both sights
  • +Multiple front color options
  • Too tall for an iron-only original 19X
  • Premium pricing
  • Requires the optic mounted to index correctly
Type: TritiumHeight: Suppressor heightUse: MOS / optic-cut slides
3

AmeriGlo CAP Night Sights

Best Value, Bright orange front at a non-premium price

$75.99
View at OpticsPlanet
TritiumBest Value
  • +Strong front-sight visibility
  • +Tritium support at night
  • +Cheapest credible tritium option
  • Not suppressor-height for optic co-witness
  • Rear dots distract some shooters
  • Standard durability, not duty-rated
Type: Tritium front and rearFront Ring: OrangeHeight: Standard

Best Glock 19X Frame & Grip Upgrades

The 19X carries the G17 Gen5 frame, so any Gen5 G17 frame part fits. Talon Grips is the cheapest worthwhile upgrade and the first one to install on a new 19X. The SLR magwell speeds reloads but replaces the factory lanyard loop, which is part of the 19X identity. The Langdon Tactical Striker Control Device is the single best holstering safety upgrade for an AIWB-carried striker pistol.

1

Talon Grips (G17/G45/19X)

Best First Upgrade, Massive grip improvement for under $25

$27.99
View at OpticsPlanet
Granulate or RubberSub-$25
  • +Largest grip improvement per dollar on a Gen5 19X
  • +Single SKU covers seven Gen5 full-size models
  • +Preserves holster fit and frame dimensions
  • Granulate wears through thin cover shirts
  • Requires careful alignment during install
  • Rubber variant collects pocket lint
Material: Granulate or rubberFit: Gen5 G17/22/31/34/35/45/47/19XInstall: Adhesive, ~10 min
2

SLR Rifleworks Magwell G17/G45/19X Gen5

Best Magwell, Faster reloads with a clean Gen5 fit

$99
View at OpticsPlanet
Gen5Aluminum
  • +Measurable reload time reduction
  • +Anodized aluminum, multiple colors
  • +Works with extended baseplates
  • Adds length to the grip
  • Competition-oriented flare is aggressive for carry
  • Replaces the 19X factory lanyard loop
Material: AluminumFit: Gen5 G17 / G45 / 19XInstall: Drop-in
3

Langdon Tactical Striker Control Device (Gadget)

Best Carry Safety, Tactile holstering check unique to striker pistols

$80
View at OpticsPlanet
Carry SafetyGen3-5
  • +Adds a holstering safety check no other striker pistol provides
  • +Drop-in slide cover plate, ~60 second install
  • +Endorsed by mainstream defensive trainers
  • Does nothing during firing or off-body carry
  • Requires consistent thumb placement to provide value
  • Not compatible with Gen6 platforms
Function: Blocks rearward striker travel under thumb pressureFit: Gen3-5 G17/G19/G45/19XInstall: Slide cover plate swap, ~60 sec

Best Optic-Cut Slides for Original 19X

This section only applies to the original non-MOS 19X. If you have the Davidson's 19X MOS, your slide is already optic-cut, skip ahead. For original 19X owners, the cheapest path to running a red dot is an aftermarket G19-length optic-cut slide. Always buy G19-length slides, never G17-length, all 19X variants use the G19 slide pattern.

1

Brownells RMR Cut Slide G19 Gen5

Best Budget, OEM reliability with a factory RMR cut

$229
View at OpticsPlanet
RMR CutBudget Pick
  • +Cheapest way to add an optic cut to a non-MOS 19X
  • +OEM fit and reliability
  • +RMR/Holosun footprint pre-cut
  • Basic serration pattern
  • No lightning cuts, no recoil benefit
  • Black nitride only
Material: 416 stainless steelFinish: Black nitrideOptic: RMR/Holosun 507C
2

ZEV Technologies OZ9 Standard Slide (G19-fit)

Best Performance, Reduced mass with RMR cut for the original 19X

$399
View at OpticsPlanet
RMR CutLightning Cuts
  • +Reduced reciprocating mass for faster splits
  • +Deep front and rear serrations
  • +RMR/Holosun optic cut included
  • Requires ZEV or compatible barrel
  • Premium price
  • May require break-in
Material: 17-4 stainless steelFinish: DLCOptic: RMR/Holosun
3

Agency Arms Syndicate S2 Slide (G19-fit)

Best Premium, Hand-fitted slide with modular optic mounting

$549
View at OpticsPlanet
AOS SystemHand-Fitted
  • +AOS plates support RMR, 507C, DPP, ACRO
  • +Hand-fitted tolerances
  • +Aggressive top and front serrations
  • Highest price in category
  • AOS plates sold separately
  • Long lead times common
Material: 17-4 stainless steelFinish: DLCOptic: AOS multi-footprint

Stock Up on Glock 19X Magazines (Do This First)

Why magazines come first: The Glock 19X takes Glock 17 magazines directly, which makes it the easiest Glock to mag-stack on the planet. G17 magazines are the most widely produced 9mm pistol magazines in the world, prices are low, OEM availability is constant, and building a 10-magazine training stack costs less than a single premium upgrade. Stock up before you spend a dollar on anything else.

How many magazines do you need: For everyday carry, two minimum, one in the gun and one on body. For home defense, three to four staged around the home gives you redundancy without logistics complexity. For range and competition work, ten magazines is the practical floor for a full training day without constant reloading breaks. The 19X ships with one OEM 17-rounder and two G17+2 19-rounders, so you start ahead. Add a Taran Tactical Firepower Base Pad +5 ($42) to bedside or competition mags to push capacity to 22+1 in a single stick.

Cross-compatibility with other Glocks: The 19X takes G17 mags directly, including OEM 17-round, OEM G17+2 19-round (the orange-follower mag the 19X ships with), OEM 33-round, Magpul PMAG 17 GL9, and PMAG 21 GL9. G19 15-round magazines also fit but leave a gap at the base of the grip (the 19X has the longer G17 grip). G17 mags also drop into the G19 and G26 frames, which makes the G17/19X mag your cross-platform standard if you own multiple Glocks. Buy OEM G17 magazines for carry reliability and PMAG GL9 for training volume.

1

Glock OEM G17 17-Round Magazine

Best Overall, Factory reliability at the factory price

$39.99
View at OpticsPlanet
17 RoundsOEM
  • +Most reliable 9mm pistol magazine in production
  • +Drops into the 19X with no modification
  • +Commonly under $25
  • No grippy baseplate for speed reloads
  • Aesthetic is plain
  • Finish on feed lips can wear over thousands of cycles
Capacity: 17 roundsMaterial: Steel-lined polymerFit: G17 Gen3-6, G45, 19X
2

Magpul PMAG 17 GL9

Best Value Aftermarket, Training mag at a sub-$20 price

$14.19
View at OpticsPlanet
17 RoundsBest Value
  • +Under $20 each
  • +Same Magpul polymer as rifle PMAGs
  • +Easy to load to full capacity
  • Not approved by every duty holster
  • Feed lips stiffer, some break-in needed
  • OEM still has the reliability edge for carry
Capacity: 17 roundsMaterial: PolymerFit: G17 Gen3-6, G45, 19X
3

Taran Tactical Innovations TTI Firepower Base Pad +5/+6

Best Extension, +5 capacity for bedside and competition 19X builds

$45.99
View at OpticsPlanet
+5 RoundsUSPSA Legal
  • +Turns a 17-round G17 mag into 22 rounds
  • +Aluminum body adds reload-seating weight
  • +USPSA Carry Optics / Limited Optics legal
  • Prints below most concealment holsters
  • Premium price next to polymer +2 extensions
  • Aluminum scuffs if dropped
Capacity Added: +5 rounds 9mm (22 total)Material: Billet aluminumFit: Glock 17/22/34/35 mags + G45/19X

More Recommended Glock 19X Magazines

Magazines & Feeding • $30

Glock OEM G17 Magazine 17-Round

  • 17 rounds
  • 9mm
$39.99
View at OpticsPlanet
Magazines & Feeding • $17

Magpul PMAG 17 GL9

  • 17 rounds
  • 9mm
$14.19
View at OpticsPlanet
Magazines & Feeding • $45

Glock OEM G17 Magazine 33-Round

  • 33 rounds
  • 9mm
$45.00 MSRP
View at OpticsPlanet
Magazines & Feeding • $42

TTI Firepower Base Pad +5/+6 (Glock 17/22/34)

  • +6 rounds (9mm) / +5 rounds (.40)
  • CNC 6061 aircraft aluminum
$45.99
View at OpticsPlanet
Magazines & Feeding • $42

TTI Base Pad +3/+4 (Glock 17/22/34)

  • +4 rounds (9mm) / +3 rounds (.40)
  • CNC 6061 aircraft aluminum
$30.99
View at OpticsPlanet
Magazines & Feeding • $30

Glock Factory 15-Round Magazine (GL79269)

  • 15 rounds
  • 9mm
$28.99
View at OpticsPlanet

Affiliate links (?)

Glock 19X Upgrade Cost Breakdown

What a fully upgraded 19X costs at three budget levels. The factory original 19X starts around $649; the Davidson's Exclusive 19X MOS Threaded MSRPs at $819.89.

UpgradeBudget BuildMid BuildPremium Build
GripTalon Grips - $22Talon Grips - $22Talon Grips - $22
Optic-cut slide (original 19X only)Brownells RMR Cut - $229ZEV OZ9 G19 - $399Davidson's 19X MOS factory
LightTLR-7A - $125TLR-1 HL - $159Modlite PL350 - $365
OpticHolosun 507C - $309Holosun 507C - $309Trijicon RMR - $539
TriggerApex AEK - $90Timney Alpha - $150Timney Alpha - $150
Sights-Night Fision OR - $139Davidson's factory AmeriGlo
Barrel-Faxon G19 Match - $189Radian RAMJET G19 + AFTERBURNER - $389
Frame Safety-SCD Gadget - $80SCD + SLR Magwell - $179
Mags3x PMAG 17 - $455x OEM G17 - $1255x OEM + 3x TTI +5 - $251
Total Added~$820~$1,572~$1,895

Budget ($820): Original 19X + optic-cut slide, Talon Grips, compact light, 507C optic, Apex trigger, three training mags. Covers an optic-equipped carry 19X. Mid ($1,572): Adds duty-grade light, suppressor-height sights, match barrel, Striker Control Device, OEM mag stack, ZEV OZ9 slide. Premium ($1,895): Davidson's 19X MOS skips the slide and sights line items because they're factory, and the saved budget goes toward a Trijicon RMR, Modlite PL350, Radian RAMJET comp, and a full mag stack with TTI extensions.

Related Glock & Pistol Guides

Best Glock 45 MOS Upgrades 2026 - The 19X's sister platform. Same G17 Gen5 frame and same G19-length slide. Slide-side and frame-side parts cross between the G45 and both 19X variants; the only difference is the Davidson's 19X MOS factory-threaded protruding 4.52-inch barrel.

Best Glock 17 Upgrades 2026 - The full-size G17 upgrade path. Triggers, magazines, mag catches, magwells, and Talon Grips all cross-fit the 19X because the 19X carries the G17 Gen5 frame. G17-length barrels and slides do NOT fit either 19X variant; both use the G19-length slide pattern.

Best Glock 19 Upgrades 2026 - The compact G19 upgrade path. G19-length barrels and slides cross-fit both 19X variants because both use the G19-length slide pattern. Buy G19-length parts for any 19X slide-side upgrade.

Glock Gen 5 vs Gen 6 2026 - What Gen 6 changes (revised trigger housing, undercut trigger guard, fixed beavertail) and which Gen5 aftermarket parts from this guide still drop into a future Gen6 19X if Glock releases one.

Best Full-Size 9mm Pistols 2026 - Platform comparison if you are still weighing the 19X against the P320, M&P 2.0 5", CZ P-10F, Walther PDP F-Series, and other full-size 9mm hosts.

Best Glock Barrels 2026 - Cross-model match, threaded, and integrated comp barrel rankings spanning G17, G19, G34, G45, G43X, and G48 with 19X fitment notes for both variants.

Best Glock Triggers 2026 - Cross-model trigger rankings including Glock Performance Trigger, Overwatch DAT, Timney Alpha, and Apex AEK. All Gen5 triggers drop into the 19X.

Best Pistol Red Dot Sights 2026 - Every pistol optic footprint ranked with battery life, emitter type, and durability for MOS-ready guns including the Davidson's 19X MOS and aftermarket optic-cut 19X slides.

Best Pistol Lights 2026 - Streamlight, SureFire, Modlite, and Inforce ranked with lumens-vs-candela breakdowns and holster compatibility notes for full-size pistol rails.

Best Glock 19 Compensators 2026 - Stand-alone comps and barrel+comp systems. G19-length options cross-fit both 19X variants since both use the G19-length slide.

Best Concealed Carry Holsters 2026 - IWB, AIWB, and OWB holsters ranked. The 19X uses the G45/G17 full-size frame paired with a G19-length slide, so G45-cut holsters fit both 19X variants directly; the Davidson's MOS variant's 4.52-inch barrel protrudes past the slide and may need a holster cut for a threaded muzzle.

Frequently Asked Questions

What should I upgrade first on my Glock 19X?
Upgrade in this order: (1) Talon Grips ($22), the cheapest meaningful improvement on a Gen5 Glock. (2) Optic, mount a Holosun 507C ($309) or Trijicon RMR ($539) directly to the Davidson's 19X MOS plate, or buy an optic-cut slide first if you have the original non-MOS 19X. (3) Weapon light, the SureFire X300U ($299) sits cleanly on the 19X's full-size G17 rail. (4) Trigger, the Timney Alpha ($150) or Apex Action Enhancement Kit ($90). (5) Suppressor-height night sights from Night Fision ($139) so you can co-witness through the optic. (6) TTI +5 base pads ($42) on bedside mags to push capacity to 22+1. The Striker Control Device ($80) is the safety upgrade no AIWB carrier should skip.
Glock 19X vs Glock 45, which should I buy?
Both are crossover Glocks with the G17 Gen5 frame, but they ship differently. The Glock 19X (2018) ships in FDE Coyote with the lanyard loop and FBI-spec rounded mag release, a 4.02-inch non-threaded barrel, and standard non-MOS irons. The Glock 45 (2018) ships in black, has a flush mag catch, the same 4.02-inch barrel, and the factory MOS optic plate set. The Davidson's Exclusive 19X MOS Threaded (2024) splits the difference, FDE nPVD finish with factory MOS, AmeriGlo suppressor-height sights, and a 4.52-inch threaded Marksman Barrel that protrudes past the muzzle. All three use the same G19-length slide. If you want optic-ready out of the box, buy the G45 or the Davidson's 19X MOS. If you want the FDE Coyote frame and are willing to add an aftermarket optic-cut slide later, the original 19X is cheaper.
Does the original Glock 19X come with an MOS optic cut?
No. The original 2018 Glock 19X ships with a non-MOS slide and standard Glock factory iron sights. To run a red dot you need either an aftermarket optic-cut slide (Brownells RMR Cut Slide G19 Gen5 at $229 is the cheapest credible option) or the Davidson's Exclusive 19X MOS Threaded variant released in 2024, which is the only 19X variant with a factory MOS cut. Buy G19-length aftermarket slides for any 19X, NOT G17-length, all 19X variants use the G19 slide pattern.
What's different about the Davidson's Exclusive 19X MOS Threaded?
The Davidson's variant is the only factory 19X with an MOS optic cut. It also swaps the original 19X's 4.02-inch non-threaded barrel for a 4.52-inch threaded Glock Marksman Barrel (1/2x28) that protrudes past the muzzle of the same G19-length slide, runs FDE nPVD finish, and ships with AmeriGlo suppressor-height sights ready to co-witness through an optic. Three magazines are included (one OEM 17-rounder, two G17+2 19-rounders). MSRP is $819.89. Slide pattern is identical to the original 19X (G19-length), so G19-length aftermarket slides and threaded G19 barrels fit both variants.
What's the best red dot for a Glock 19X MOS?
The Holosun 507C X2 ($309) is the default recommendation for the Davidson's 19X MOS or any optic-cut 19X slide. Multi-reticle, solar failsafe, side-loading battery, and it direct-mounts to the RMR-pattern MOS plate. The Trijicon RMR Type 2 ($539) is the duty-grade pick with forged 7075 aluminum and a proven track record on duty Glocks. For daily carry where lint and debris are concerns, the Aimpoint ACRO P-2 ($599) runs an enclosed emitter with a 50,000 hour battery, but it requires a separate ACRO MOS plate. The 509T is also a strong enclosed-emitter option but adds noticeable height and weight on a carry 19X.
Does the SureFire X300U fit the Glock 19X?
Yes. The 19X has the same full-size G17 frame and accessory rail, so the SureFire X300U-A ($299) sits cleanly. On the original 19X it overhangs slightly past the 4.02-inch muzzle; on the Davidson's MOS variant the 4.52-inch barrel protrudes past the G19-length slide and gives even more clearance for the light. The X300U is the duty standard and has the broadest holster support of any pistol light. The Streamlight TLR-1 HL ($159) is the best-value full-size alternative with the same 1,000 lumen output. The Modlite PL350 PLHv2 ($365) is the throw-distance upgrade, 54,000 candela for outdoor work. For concealed carry, the Streamlight TLR-7A ($125) keeps the package smaller.
Can you run a suppressor on a Glock 19X?
Yes, and it's easier on the Davidson's 19X MOS Threaded because it ships with a 1/2x28 threaded Glock Marksman Barrel, just thread on a booster-equipped 9mm can and you're done. On the original 19X you need to swap to a G19-length threaded barrel like the SilencerCo Threaded Barrel G19 ($199) first. Pair either with suppressor-height Night Fision sights so you can index past the can. The 19X is a strong suppressor host because the full-size G17 grip handles the added weight better than a G19, and the Davidson's MOS already has factory suppressor-height irons.
What magazines fit the Glock 19X?
The Glock 19X takes Glock 17 magazines directly. The factory 19X kit includes one OEM 17-round G17 magazine plus two G17+2 magazines (19+1 with the orange follower), so the 19X is the only Glock that ships with extended mags as standard. For more carry mags, buy OEM G17 17-round magazines ($25). For training volume, the Magpul PMAG 17 GL9 ($15) is the best-value option. For maximum capacity on bedside or competition guns, the Taran Tactical Innovations Firepower Base Pad +5 ($42) turns a 17-round G17 mag into a 22-rounder, USPSA Carry Optics and Limited Optics legal.
Do Glock 17 parts fit the Glock 19X?
Frame parts yes, slide parts no. The 19X uses the G17 Gen5 frame, so triggers, magazines, mag catches, magwells (G17 Gen5 fitment), Talon Grips, the SCD, and frame accessories all share between the G17 and 19X. Slide-side: both 19X variants use a G19-length slide, so G17-length slides and barrels do NOT fit either variant. Buy G19-length aftermarket slides and G19-fit threaded barrels regardless of which 19X you own. The Davidson's MOS factory barrel is a 4.52-inch threaded barrel that protrudes past the G19-length slide; an aftermarket comp setup like the Radian RAMJET G19 + AFTERBURNER fits because both 19X slides are G19 pattern.
What is the Striker Control Device and do I need one on my Glock 19X?
The Langdon Tactical Striker Control Device ($80), originally the Tau Development Group Gadget, replaces the factory slide cover plate with a hinged tab. When you press your thumb against the tab during holstering, it blocks the striker from moving rearward. If a drawstring, garment, or worn holster mouth pushes the trigger to the rear, the tab pushes back against your thumb before the striker releases. AIWB and appendix carriers get the most value, the SCD is the only mainstream way to add a tactile holstering safety check to a striker-fired pistol. Compatible with Gen3-5 G17, G19, G45, and 19X.