Ghost Inc
Edge Drop-In Trigger Connector (Glock 42/43/43X/48)
One of the only G42-compatible trigger upgrades. Drop-in connector that lightens the pull and removes the factory pre-travel bump. The Apex AEK and Ghost Rocket connector do not fit the G42; the Edge is the workable path.
Quick Specs
- Price
- $24
- Weight
- N/A
- Brand
- Ghost Inc
- Category
- pistol-trigger
Features
- •Drop-in trigger connector
- •Reduces pull weight by ~1 lb
- •Removes pre-travel bump
- •Stainless steel finish
- •Fits Glock 42, 43, 43X, and 48
Where to Buy
Compare current prices and availability from retailers we work with.
Ghost Inc Glock 42 Edge Drop In Trigger Connector Stainless Finish 42-43-2424-V-1
Compatibility Tags
Overview
The Ghost Edge connector (part 42-43-2424-V-1) is one of the only aftermarket trigger upgrades verified to fit the Glock 42, Glock 43, Glock 43X, and Glock 48. The Apex Action Enhancement Kit's slim-frame variant is G43/43X/48 only, and the Ghost Rocket connector is explicitly listed as fitting all Glocks except the G42 and G43, which leaves the slim-frame G42 and G43 owners with very thin trigger options. The Edge connector is a stainless replacement for the factory plastic connector and trims pull weight by roughly a pound while removing the pre-travel bump from the factory take-up.
Installation is drop-in but requires basic Glock armorer skills: unload, field strip, remove the slide, push out the trigger pin and locking block pin, lift out the trigger group, swap the connector, and reassemble. About 10 minutes with a punch and tray. The connector keeps the factory curved trigger shoe and factory firing pin safety geometry, so it is carry-safe when paired with factory springs.
Key Features
- Drop-in stainless steel trigger connector
- Lightens pull weight by roughly 1 lb
- Removes factory pre-travel bump
- Carry-safe with factory springs
- Fits Glock 42, 43, 43X, and 48
Pros
- +Verified fitment for the Glock 42 (most aftermarket trigger parts do not fit)
- +Drop-in install in 10 minutes with a punch and tray
- +Lightens pull roughly 1 lb and shortens reset
- +Carry-safe pull weight when paired with factory springs
- +Stainless finish resists corrosion
Cons
- −Connector only, does not change the trigger shoe
- −Shorter reset comes at the cost of feeling slightly less crisp than a full kit
- −Requires basic Glock armorer knowledge (frame disassembly)
Detailed Specifications
- Material
- Stainless steel
- fits
- Glock 42, 43, 43X, 48
- installation
- Drop-in, ~10 min with punch and tray
- pullChange
- ~1 lb lighter, no pre-travel bump
- partNumber
- 42-43-2424-V-1
Compatible Platforms
+193 moreSimilar Products
Related Guides & Articles
Guides
Build Your Custom Configuration
Add the Edge Drop-In Trigger Connector (Glock 42/43/43X/48) to your build and see how it enhances your platform.