Pistol Triggers

Drop-in trigger kit that reduces pre-travel and over-travel for cleaner break.

Self-contained drop-in trigger with 3lb pull weight for competition use.

Drop-in flat-faced trigger with reduced take-up and crisp break.

Drop-in flat-faced trigger with reduced take-up and crisp break for Gen 5 standard-frame Glock pistols.

Timney's Gen 6-specific Alpha Competition cassette. 3 lb self-contained drop-in built around the Gen 6 trigger housing geometry, the only mainstream cassette trigger that fits the new generation.

CMC's Gen 6-specific Combat Curve trigger and bar. Reuses the factory Gen 6 trigger housing and gives the Gen 6 a cleaner curved-face break without a complete cassette swap.

Drop-in trigger enhancement for slim Glocks with reduced pre-travel.

Flat 6061 aluminum trigger shoe and polished steel bar for the 9mm Glock 43, 43X, and 48.

Flat-faced Overwatch DAT V2 trigger for Glock 43, 43X, and 48 pistols in the black/black SKU 28222 configuration.

Housing-included flat trigger kit with OEM internals for the 9mm Glock 43, 43X, and 48.

Drop-in forced-reset disconnector for supported Taurus TX22 Standard and T.O.R.O. pistols.

Curved aluminum trigger, PRO trigger bar, and PRO connector for the 9mm Glock 43, 43X, and 48.

Apex's Gen 6-specific drop-in kit: trigger and Evo 6 bar assembly, Performance Connector, and Competition Striker Spring. Shortens pre-travel and reset and lands between 3.8 and 4.8 lb depending on which striker spring you run.

Flat-face anodized-aluminum drop-in trigger for the Ruger LCP MAX with a CFR-nylon safety blade, built-in pre-travel stop, and 20-25% reduction in factory pre-travel.

Gen 6-specific drop-in trigger system from Johnny Glocks in Defensive (3.5 lb) and Competitive (2-3 lb) configurations. Engineered specifically for the new Gen 6 trigger housing and bar geometry, with adjustable pull weight, zero overtravel, and a hand-tuned wall.

Timney's Gen 5-specific Alpha Competition unit. Assembled 3 lb drop-in built around the Gen 5 trigger housing geometry; buy this SKU for Gen 5 frames instead of the Gen 3/4 model.

Premium aluminum-shoe version of the Apex FSS kit. Same internals as the polymer kit, machined aluminum shoe with anodized finish options.

Flat-faced drop-in trigger kit cut specifically for the Glock 42. The only widely available flat-face option for the G42 since Apex's slim-frame kit excludes it. Includes shoe, connector, and competition spring.

One of the only G42-compatible trigger upgrades. Drop-in connector that lightens the pull by approximately 2.5 lb on average and removes the factory pre-travel bump. The Apex AEK and Ghost Rocket connector do not fit the G42; the Edge is the workable path.

Competition extended firing pin for Shadow/85-style CZs running lighter hammer springs.

Aftermarket flat trigger for P365 with improved geometry and feel.

4140 steel non-select forced reset device for M&P M2.0 pistols, including listed Metal, Performance Center, and Thumb Safety variants.

Black-nitrided 4140 non-select M&P 2.0 FRT with the most explicit fitment exclusions of any M&P forced reset trigger.

Glock forced-reset upgrade with three stainless trips and confirmed standard-frame plus G43X/48 fitment; no trigger safety.

Complete flat-faced drop-in trigger kit for Glock 43/43X/48 that includes its own trigger housing, so it also fits Glock-pattern clone frames like the PSA Micro Dagger.

Flat-faced drop-in trigger built for the Gen 3/4 large-frame Glock 20 and 21, with reduced take-up and a flat polymer shoe.

The defining M&P 2.0 trigger upgrade. Flat-faced polymer shoe with forward-set geometry, ~2 lb lighter pull, and 40% shorter travel.

Stainless forced-reset hammer strut for full-size 1911 and 2011 pistols, shipped with a documented 22-step install procedure.

Reduced-power CGW hammer springs for CZ trigger tuning. Pair with the correct firing-pin spring and ignition setup.

Hardened 4140 steel non-select forced reset device for M&P M2.0 Full, Compact, and Subcompact pistols.

Stainless forced-reset hammer strut for full-size 1911 and 2011 pistols. Four sizes included. Requires a Marvel Cut.

Drop-in forced reset trigger for Canik METE and RIVAL pistols, CNC-machined from billet aluminum with a Cerakote finish.

Billet aluminum Glock forced-reset trigger. Native Gen 1-4 fit; Gen 5/6 need a Gen 4 slide-release swap. Excludes the G44.

Larry Vickers carry trigger shoe that covers Gen 3-4 standard-frame Glocks and every slimline model including the G42.

Factory flat trigger for P365 from the X-Macro and Spectre Comp line.

High-polish 316 stainless steel M&P 2.0 forced reset device that requires no fitting, polishing, or unit modification.

Six polymer M&P 2.0 forced reset parts with broad listed fitment and a disabled striker safety plunger when installed.

Hand-tuned 3.5 lb slimline Glock trigger system that replaces the entire fire-control group, firing pin assembly included.

C95500 nickel-aluminum bronze two-position forced reset device for compatible M&P 2.0 hosts and conditional M&P 1 pistols.

Advanced Reset Technology's premium Gen 4 Glock kit uses slide energy to drive the trigger forward, one round per pull. It is a reset-assist design, adjacent to but distinct from a forced-reset trigger.

Flat-face trigger plus tuned spring kit (part 115-152) for the Hellcat and Hellcat Pro. One-shot install that improves take-up, break, and reset.

Complete flat-face trigger and duty/carry sear kit for the entire M&P Shield family including Shield Plus. Keeps factory safeties, adds roughly 1 lb of pull reduction.

Drop-in flat-face polymer trigger shoe (part 115112) for the Hellcat and Hellcat Pro. Replaces the factory curved face for more consistent finger placement.

Flat-faced drop-in trigger kit that drops the FN 509's factory pull from ~7 lbs to ~5.5 lbs while tightening pre-travel, over-travel, and reset.

Adjustable flat trigger with pre-travel and over-travel adjustment screws.

Hybrid curved-flat trigger shoe for the VP9 and VP40 from Grayguns. It keeps a familiar curved feel with a flatter lower face and over-travel adjustment.

Flat-face adjustable trigger shoe for standard HK VP9 and VP40 models. The over-travel adjustment helps tune reset feel while retaining factory safety values.

Wide CZ Custom competition hammer for Shadow 2 fire-control builds focused on a cleaner single-action pull.

European IPSC spring set that lightens and smooths a CZ 75 / SP-01 trigger without a hammer swap. The value tuning path next to a full CGW kit.

Cycle-Actuated Reset Trigger strut for 1911 and 2011 pistols, shipped in three sizes including an oversized blank for hand fitting.

Curved forward-set trigger kit that reduces reach and improves P320 trigger geometry.

CGW P-10 hard-parts package with striker, steel T-block, pins, and striker spring, with an optional flat trigger add-on.

Assembled slimline Glock carry trigger system that smooths take-up, break, and reset while keeping every factory spring weight.

CNC-milled nickel aluminum bronze M&P M2.0 forced-reset device with broad model and caliber coverage and a named Apex sear exclusion.

Prototype nickel aluminum bronze M&P 2.0 device with user-selected standard semi-auto and forced reset modes.

Tool-steel hammer, sear, and disconnector kit that replaces the Prodigy's MIM ignition parts for a crisper, lighter single-action break.

Defensive-tuned drop-in Glock trigger with a 3.5-4.5 lb break, defined wall, and short tactile reset. Built for carry and duty rather than competition-light pulls.

The metal-frame counterpart to Apex's M&P Forward Set kit. Aluminum flat-faced shoe, forward-set geometry, and a metal-frame-specific safety for the Competitor and M&P Metal.

Drop-in forced-reset disconnector that fits every Taurus TX22 model and generation, including the Compact.

Anodized aluminum flat-face trigger shoe with reduced pre-travel. Shoe-only swap that preserves factory trigger bar reliability. Separate SKUs for METE and TP9.

Forced reset trigger for the Canik METE and SFX Rival, with a 6061 aluminum shoe and a 316 stainless steel trip.

Flat-face Glock forced-reset trigger stated to fit Gen 1-5 (excludes the G44). Ships with the trigger bar and two trip modules.

Cheapest billet-aluminum Glock reset-assist kit. Two 316 stainless resets included, one drop-in and one trim-to-fit. Maker states Gen 1-5 excluding the G44, and recommends a heavier recoil spring.

Selectable Glock forced reset device that switches between a normal trigger and FR mode. The only Glock FRT stated to work with the ambi slide release, so Gen 5 skips the slide-release swap. Not drop safe, range use only.

Trigger-and-slide binary firing system for Glock 17 Gen 3. Selectable semi and binary modes. Ships with tritium sights and optics-ready slide; barrel and recoil system sold separately.

Conventional flat-face short-stroke trigger for the Canik METE MC9 and MC9 PRIME, with pre-travel and post-travel stops that shorten the overall pull.

Budget reinforced-nylon flat-face trigger shoe with built-in overtravel stop; choose the TP9, TP9 Elite, TP9SFx, or METE MC9 variant for the host pistol.

Flat-face anodized-aluminum drop-in trigger for the Ruger MAX-9 with a built-in pre-travel stop, integrated safety blade, and 20-25% reduction in factory pre-travel.

Glock's own factory flat-face upgrade trigger. Roughly 5 lb pull with a defined wall and short reset, ships with a Gen 5 slide cover plate for Gen 4 fit, and retains the Glock Safe Action System. The duty-credible upgrade Glock owners reach for first.

Adjustable slimline Glock trigger bar and laser-textured shoe with a hex screw that sets reset and over-travel.

Drop-in sear and safety-lever kit that cuts the single-action reset travel of a legacy DA/SA SIG P-Series pistol by roughly 70 percent when paired with a Grayguns adjustable trigger, for faster follow-up shots.

EDM-cut custom mainspring strut and machined aluminum seat that removes the double-action crunch, bundled with the Master Spring Set so the pull weight is tunable in the same order.

Flat-faced, fully adjustable replacement trigger for legacy DA/SA SIG P-Series pistols that shortens take-up and changes leverage for a lighter, more consistent single-action break.

Reduced-power mainspring and competition sear-spring set that lightens the double-action pull on a legacy DA/SA SIG P-Series pistol for a few dollars.

Drop-in CNC aluminum trigger shoe that eliminates roughly 20% of pre-travel and delivers a consistent 4 lb pull with a firmer reset than factory.

Machined aluminum slimline Glock trigger shoe with a pre-travel adjustment screw, sold with a matched trigger bar.

Langdon Tactical's 92/96/M9 Trigger Job in a Bag: trigger bar, hammer, sear parts, trigger spring, hammer strut, and selectable reduced-power hammer spring options.

Hardened steel forced-reset backplate that pushes the trigger bar forward on M&P M2.0 pistols with the supported trigger style.

Flat-faced shoe-only replacement that bolts to the factory Echelon trigger bar. Eliminates pre-travel and over-travel for first-shot and follow-up split speed.

Flat-face trigger kit with NP3'ed OEM Canik bar, 3.8 lb and 4.4 lb return springs, and shorter travel for supported TP9, METE, SFX Rival, and SFX Rival-S models.

Adjustable straight P320 competition trigger kit with over-travel adjustment and a lighter competition pull.

316 stainless forced-reset hammer strut for full-size 1911 and 2011 pistols. Small, medium, and large struts included. Requires a Marvel Cut.

Flat-face trigger shoe and bar kit with ZEV's included PRO connector. Its travel geometry is preset at the factory rather than adjusted with set screws.

The complete CGW trigger job for decocker CZ 75 / SP-01 pistols. The canonical first upgrade, taking a stock SP-01 to ~6 lb DA / sub-3 lb SA.

Internal hard-parts kit (sear, disconnector, striker safety, springs) for the Hellcat and Hellcat Pro. Tunes pull to ~3.5-4.5 lb depending on spring choice.

Complete Echelon trigger job with flat-face hybrid shoe and full spring kit. Cuts take-up by 60%, travel by 46%, reset by 20%, and drops the pull to roughly 3.5 lb.

PRP's base internal kit plus the HTS aluminum trigger shoe. The full-package Hellcat trigger job: springs, hard parts, and aluminum shoe in one install.

Forced-reset trigger for Canik pistols, with the broadest published fitment of any Canik FRT and the only one that lists the micro-compact MC9 and MC9 Prime.

Budget Rocket 3.5 connector upgrade for standard-frame Gen 1-6 Glocks. Reuses the factory shoe and bar while tuning break and overtravel with Ghost's TCT connector geometry.

Flat-face aluminum FRT trigger shoe plus reset trip for Gen 1-4 Glocks. It reuses your trigger bar and requires fitting, an advanced DIY option, not a drop-in kit.

Complete fire-control overhaul that transforms the Shadow 2 into a 6 lb DA / sub-3 lb SA with Reach Reduction.

Drop-in flat trigger with clean break and reduced pre-travel for duty or competition.

Complete drop-in trigger kit pairing a flat 7075-T6 aluminum shoe with an NP3-coated trigger bar and OP Minus connector. Carry-safe pull weight with reduced pre-travel and a defined wall.

Skeletonized flat-faced aluminum trigger kit with a 2 to 2.5 lb pull, adjustable pre- and post-travel, for the full Ruger Mark IV family.

Flat-faced skeletonized trigger shoe with adjustable pre-travel and over-travel for the Ruger Mark IV 22/45 grip frame.

Drop-in P320 forced-reset trigger with maker-listed Full Size, Carry, Compact, M17, M18, and Flux Raider fitment.

Flat aluminum CZ P-10 trigger kit with a 4 mm pre-travel reduction and two reduced-power striker springs.

Trinity Trigger's Glock forced-reset trigger uses a 304 stainless trip and polymer shoe. The maker omits a generation; a reseller states Gen 1-4 only.

Drop-in connector that lowers Glock pull weight to roughly 3.5 lb. Cheapest meaningful trigger upgrade on the platform when paired with the factory shoe.

Two-position SEMI and RRS rapid reset system for the Smith & Wesson M&P family, offered in five materials.

Skeletonized flat-faced aluminum trigger shoe that cuts pull weight by ~2 lbs with adjustable pre- and post-travel.

Drop-in accurizing kit for the Ruger Mark IV that swaps the factory disconnector, hammer, sear, and trigger for a 2.25 lb match break.

Metal reset lever for the Walther PDP/PPQ family that uses slide movement to assist trigger reset.

Wilson Combat's longest-running 1911 trigger and the no-fitting-required budget alternative to the Ultralight Match. Three-hole aluminum pad, blued steel bow, adjustable over-travel screw.

Steel replacement trigger shoe that shortens DA reach by 0.1 inch and upgrades from the factory polymer shoe.

Full action tune package with three chrome silicon hammer spring weights and an enhanced trigger bar.

Wilson Combat's Ultralight Match Trigger is the trigger Wilson Combat installs in their custom shop pistols, available as a drop-in upgrade for any full-size 1911 frame (Government or Commander).

Rival-tuned Fast Action Trigger for the Canik SFX Rival, also listed for the METE family and TTI Combat, Wise Arms' forced-reset-style drop-in at a value price.

The cheapest Canik FRT-style trigger, a Fast Action Trigger built specifically for the TP9 series that drives much faster splits than the factory pull.

Wise Arms' Fast Action Trigger V2 Flat is a recoil-assisted Glock forced-reset trigger, one round per pull, stated to fit Gen 1-5 except the G44. The cheapest complete kit at $59.99.

Factory flat trigger upgrade from the X-Series P320 line.

Complete Gen 3 Glock 9mm flat-trigger assembly with the trigger housing included.

Gen 5 Glock 9mm flat trigger and bar that reuse the pistol's factory trigger housing.

Full drop-in flat-face trigger kit purpose-built for the PSA Dagger Compact and Full Size; includes OEM Gen 3 Glock housing because PSA's factory housing is not compatible.

4140 steel M&P 2.0 forced reset device with maker-stated three-mode operation and automatic semi-auto fallback.

Skeletonized flat-faced trigger shoe for the Browning Buck Mark with a textured face and an over-travel adjustment screw.

Skeletonized flat-faced aluminum trigger for the Ruger-5.7 with pre- and post-travel adjustment screws.

Skeletonized flat-faced aluminum trigger shoe for the SW22 Victory with pre- and post-travel adjustment screws and a textured face.

CNC-machined flat aluminum trigger shoe for the Walther P22 that cuts pre-travel and over-travel while keeping DA/SA function.