HUXWRX Flow 9K Ti

The HUXWRX Flow 9K Ti is HUXWRX's first fully 3D-printed pistol-class suppressor and the evolution of the RAD 9. The entire core is DMLS-printed Grade 5 titanium, which lets HUXWRX run their hybridized flow-through baffle geometry that no traditional CNC suppressor can match. The result is a 4.8 oz tube (without booster) that measures 5.33 inches long and 1.47 inches in diameter, rated for 9mm, .22 LR, .17 HMR, 5.7x28, 300 Blackout (sub and super), and .350 Legend with no barrel-length restrictions.

The reason this can is the modern recommendation for the SIG MPX is the flow-through design. Traditional baffle stacks vent gas back into the action, which on a gas-piston PCC like the MPX can mean increased shooter blowback and a dirtier action. HUXWRX's flow-through path drives gas forward and out the muzzle, making it a better match for blowback-sensitive PCCs and subguns.

The Flow 9K Ti ships with a 1/2x28 booster assembly and a HUB piston adapter. The booster's piston lets a tilting-barrel handgun cycle reliably; HUB 3-lug, stiction, and direct-thread adapters are available separately for PCC, subgun, and fixed-barrel hosts. MPX K and Carbine owners on the US-market 1/2x28 muzzle thread run direct-thread with the appropriate adapter; older M13.5x1 LH MPX barrels need a thread adapter. The can is full-auto rated, with HUXWRX publishing full-auto durability data on .300 Blackout, and it carries no barrel-length restriction. Total assembled length adds about 5.25 inches to the host.