Best .45 ACP Suppressors 2026: Quietest Pistol Cans Ranked header image
Gear
July 7, 2026
Best .45 ACP Suppressors 2026: Quietest Pistol Cans Ranked

Ten .45 ACP suppressors ranked for the naturally subsonic caliber, from the quietest measured can to the iconic offset design and the newest low-backpressure titanium. $0 NFA tax, eForm waits in days.

Our Top Picks

  1. #1 Rugged Obsidian 45 ($930): Best overall and quietest measured: belt-fed rated, modular short-to-full, runs 9mm through .45 ACP at ~129 dB
  2. #2 SilencerCo Osprey 45 2.0 ($696): Best sight clearance: the iconic eccentric offset design sits low enough to often run standard sights
  3. #3 Dead Air Mojave 45 ($1,029): Best low backpressure: Dead Air's latest titanium .45 can with Triskelion gas management to cut blowback

Our Top Picks

1
Rugged Obsidian 45
Best overall and quietest measured: belt-fed rated, modular short-to-full, runs 9mm through .45 ACP at ~129 dB
$727
2
SilencerCo Osprey 45 2.0
Best sight clearance: the iconic eccentric offset design sits low enough to often run standard sights
$696
3
Dead Air Mojave 45
Best low backpressure: Dead Air's latest titanium .45 can with Triskelion gas management to cut blowback
$1,029

Affiliate links (?)

[ < Back to guides ]
Buying guideSuppressorsPistol

Best .45 ACP Suppressors 2026: Quietest Pistol Cans Ranked

The best .45 ACP suppressor for most shooters in 2026 is the Rugged Obsidian 45 ($930), the quietest measured .45 can in consistent third-party testing at around 129 decibels and the only pistol can here with a belt-fed rating. .45 ACP is naturally subsonic in standard 230-grain loads, so the right large-bore can turns a full-size 1911 or Glock 21 into a genuinely quiet host with factory ammo and no supersonic crack. If keeping your factory sights usable matters, the SilencerCo Osprey 45 2.0 ($696) uses an eccentric offset body that sits below the bore line, and the Dead Air Mojave 45 ($1,029) is Dead Air's low-backpressure titanium answer for cutting gas blowback. The federal NFA tax dropped to $0 on January 1, 2026, and eForm 4 approvals now run days, not months.

By AB|Last reviewed July 2026

Best .45 ACP Suppressors 2026, Ranked

These ten cans are ranked on the things that actually decide a .45 buy: measured sound on subsonic 230-grain loads, weight hanging off the muzzle, backpressure into your face, mounting flexibility, and whether the can survives the host you run it on. The .45 ACP standard runs from a dedicated quietest can to a one-stamp big-bore that also swallows rifle calibers, so match the can to your host: a dedicated .45 can if you only shoot pistol, a .46-bore big-bore if one stamp has to cover a rifle too.

Best .45 ACP Suppressors 2026, Ranked

Ten .45 ACP cans ranked for the naturally subsonic caliber. Measured sound, weight, mounting path, backpressure, and full-auto rating govern placement, from the quietest measured can to the widest one-stamp big-bore.

1

Rugged Obsidian 45

Best overall and the quietest measured .45 can, a belt-fed-rated modular do-everything suppressor that runs 9mm through .45 ACP.

$727.00Save 22%
Shop at KYGUNCO
Quietest MeasuredBelt-Fed Rated9mm-.45 Modular
  • +Quietest of the field on .45 ACP in consistent PEW Science / Pew Pew Tactical testing (~129 dB)
  • +Belt-fed / full-auto rated, the most durable pistol can here
  • +Modular short (6.7 in) and full (8.6 in) lengths
  • −Larger 1.37 in diameter and heavier than the titanium cans (up to 12.8 oz full)
  • −Full length is long for a carry-oriented setup
  • −Not quite as quiet on 9mm as a dedicated 9mm can
Sound: ~129 dB on .45 ACP (quietest measured)Length: 6.7 in short / 8.6 in fullWeight: 10.7 oz short / 12.8 oz fullDiameter: 1.37 in
2

SilencerCo Osprey 45 2.0

Best sight clearance, the iconic eccentric-bore .45 can whose offset design sits low enough to often use standard sights.

$696
Shop at Silencer Central
Offset DesignBest Sight Clearance9.2 oz
  • +Eccentric offset baffle stack sits below bore axis for the lowest sight obstruction of any .45 can
  • +Frequently usable over standard-height sights, no tall suppressor sights required
  • +Light at 9.2 oz for a full-size .45 can
  • −Not full-auto rated, so it is a semi-auto pistol and PCC can only
  • −Pistons are a separate purchase per host and thread pitch
  • −Offset body is less at home in fixed-mount QD ecosystems
Sound: ~130 dB on .45 ACPLength: 8.06 inWeight: 9.2 ozDesign: Eccentric offset, below-bore-axis stack
3

Dead Air Mojave 45

Best low backpressure, Dead Air's latest titanium .45 can built to cut gas blowback on semi-auto hosts.

$1,029
Shop at Silencer Central
Low BackpressureFull-Auto RatedTitanium
  • +Triskelion Gas Management System cuts back pressure and blowback on semi-auto .45 pistols and PCCs
  • +Low-backpressure titanium build, Dead Air's marketed quietest .45
  • +Modular 6.812 in short and 8.6 in long lengths
  • −Premium pricing near $1,029, among the most expensive dedicated .45 cans here
  • −1.48 in diameter is wider than the titanium HUB cans
  • −Pistons for other thread pitches are a separate purchase
Architecture: 6AL-4V DMLS titanium, Triskelion gas managementLength: 6.812 in short / 8.6 in longWeight: 10.44 oz short / 12.7 oz longDiameter: 1.48 in
4

HUXWRX Flow 45M

Lightest and lowest-blowback, a 3D-printed titanium flow-through can at 7.4 oz full length.

$708
Shop at Silencer Central
Lightest at 7.4 ozFlow-ThroughTitanium HUB
  • +Lightest full-size .45 can here at 7.4 oz full, 5.4 oz in the K configuration
  • +Flow-through baffle design vents gas forward to cut blowback on semi-autos
  • +3D-printed Grade 23 titanium on the .578x28 HUB standard
  • −Not user-serviceable; the flow-through core is sealed
  • −HUB pistons and adapters are a separate purchase per host
  • −Flow-through cans run slightly louder than sealed cans on subsonic loads
Architecture: 3D-printed Grade 23 titanium, flow-throughLength: 8.5 in full / 6.3 in KWeight: 7.4 oz full / 5.4 oz KDiameter: 1.375 in
5

Banish 45

Best user-serviceable and the direct-from-maker buying path, a titanium can that covers rimfire through .45 ACP.

$979
Shop at Silencer Central
User-ServiceableRimfire to .45Direct From Maker
  • +Fully user-serviceable, disassembles for cleaning on dirty pistol calibers
  • +Widest pistol-caliber spread here: .22 LR, .380, 9mm, .40, 10mm, .45 ACP
  • +Light titanium build, 9.6 oz short / 11 oz long
  • −Aluminum baffles are less abusive-use tolerant than stainless
  • −Piston mount is a wear item on high-round-count use
  • −Piston/direct-thread mount only, no QD or 3-lug option
Architecture: Titanium body, aluminum bafflesLength: 6.7 in short / 8.6 in longWeight: 9.6 oz short / 11 oz longCalibers: .22 LR, .380, 9mm, .40, 10mm, .45 ACP, .300 BLK sub
6

SilencerCo Omega 45K

Best value and shortest, a welded tubeless can at 6.39 inches with a huge rated-caliber list.

$636
Shop at Silencer Central
Shortest at 6.39 inBest ValueWelded Stellite
  • +Shortest full-strength .45 can here at 6.39 inches
  • +Best street value, often near $636
  • +Welded tubeless Stellite core, full-auto rated
  • −Welded tubeless design is not user-serviceable
  • −Piston and adapters are a separate purchase per host
  • −Fixed 6.39 in length, not modular
Architecture: Welded tubeless Stellite / stainlessLength: 6.39 in (fixed)Weight: 10.7 ozDiameter: 1.48 in
7

Griffin Armament Revolution 45

Best budget modular, the cheapest modular .45-bore can with QD, 3-lug, and direct-thread options.

$699
Shop at Silencer Central
Cheapest ModularFull-Auto RatedQD or 3-Lug
  • +Lowest price of the premium modular cans, street $635-$735
  • +Modular 6.56 in short and 8.81 in full lengths
  • +Full-auto rated on subsonic and pistol loads
  • −Heavier than the titanium cans at 13.3 oz full
  • −7075 aluminum tube is less abusive-use tolerant
  • −Griffin lists a max diameter rather than naming each caliber
Architecture: 17-4 stainless baffles, 7075-T6 aluminum tubeLength: 6.56 in short / 8.81 in fullWeight: 10.2 oz short / 13.3 oz fullMount: 1.125x28 taper; direct-thread and QD adapters
8

Dead Air Ghost 45

Proven modular pistol can, a P-Series host that spans .45 ACP, 9mm, and subsonic .300 BLK.

$949
Shop at Silencer Central
Modular P-Series.45 and 9mmFull-Auto Rated
  • +Modular 6.2 in short and 8.75 in full configurations
  • +P-Series mount ecosystem: pistons, fixed mounts, 3-lug, KeyMicro, Xeno
  • +Full-auto rated construction
  • −Legacy design now sitting below the newer Mojave 45 in the Dead Air line
  • −Mounts are a per-host purchase and add to system cost
  • −Stainless build runs heavier than the titanium cans, up to 12 oz full
Architecture: 17-4 stainless steelLength: 6.2 in short / 8.75 in fullWeight: 9.6 oz short / 12 oz fullDiameter: 1.38 in
9

SilencerCo Hybrid 46M

Widest coverage on one stamp, a .46-bore can that runs .45 ACP up to .45-70, .458 SOCOM, and .338 Lapua.

$993.65Save 15%
Shop at Classic Firearms
Widest Caliber SpanModular ASR9mm to .338
  • +Broadest caliber span on a single can: 9mm through .45 ACP and 5.56 up to .338 Lapua Magnum
  • +Two-piece modular body runs short (5.78 in) or long (7.72 in)
  • +Titanium, Inconel, and 17-4 stainless, full-auto rated in both configs
  • −The .46 bore gives up a few dB to a dedicated .45 can
  • −$1,169 MSRP is high for pistol-only use
  • −Heavier than a dedicated .45 can for everyday pistol suppression
Architecture: Titanium, Inconel, 17-4 stainlessLength: 5.78 in short / 7.72 in longWeight: 12.2 oz short / 14.9 oz longDiameter: 1.57 in
10

Banish 46-V2

One-stamp-does-everything titanium big-bore, .45 ACP pistol through magnum rifle up to .460.

$1,229
Shop at Silencer Central
Pistol to Magnum RifleTitaniumServiceable
  • +Rated 5.56 up to .460, explicitly including .45 ACP and 10mm pistol
  • +Titanium tube with a 17-4 stainless blast baffle
  • +Can-Clean serviceable, reorderable baffle stack
  • −Heavy at 15.3 oz for pistol-only use
  • −Larger 1.59 in diameter
  • −Overkill and overpriced if you only shoot .45 pistol
Architecture: Titanium tube, 17-4 stainless blast baffleLength: 8 inWeight: 15.3 ozDiameter: 1.59 in

Affiliate links - purchases support this site at no extra cost to you. (?)

Complete Your Build

Sling, light, backup sights, and QD mounts, the upgrades most builders add first.

Open the builder
Illumination • $155.49

Streamlight ProTac HL-X

  • ✓1,000 lumens
  • ✓50,000 candela
$96.52$155.49Save 38%
View at Amazon
Slings & Retention • $66.45

Magpul MS4 Dual QD Sling

  • ✓Dual QD swivels
  • ✓Convertible design
$66.45
View at OpticsPlanet
Slings & Retention • $13.95

Magpul QD Sling Swivel

  • ✓QD swivel
  • ✓Manganese phosphate
$14.99
View at OpticsPlanet
Slings & Retention • $17.85

BCM M-LOK QD Sling Mount

  • ✓M-LOK
  • ✓QD socket
$17.85
View at OpticsPlanet
Iron Sights • $79.99

Magpul MBUS 3

  • ✓Impact-resistant polymer
  • ✓Spring-loaded flip-up
$79.99 MSRP
View at OpticsPlanet
Slings & Retention • $67.46

Blue Force Gear Vickers Sling

  • ✓Padded shoulder section
  • ✓Quick-adjust slides
$53.59$67.46Save 21%
View at OpticsPlanet

Affiliate links (?)

Scroll

Get .45 Suppressor Reviews and NFA Process Updates

New .45 can reviews, sound ratings, and NFA approval timeline updates delivered to your inbox.

Free targets, drill cards, and weekly reviews by email. Follow our Facebook for daily builds and gear picks.

Follow

Why .45 ACP Is the Suppressor Caliber

.45 ACP is the easiest common pistol round to suppress because it is subsonic straight from the factory. Standard 230-grain ball leaves the muzzle around 830 to 900 feet per second, well under the roughly 1,125 fps sound barrier, so there is no supersonic crack for the can to fight. That is the practical difference from 9mm: a 9mm host often needs dedicated heavy-for-caliber subsonic loads to stay quiet, while a .45 gives you the quiet experience on the ammo already in your range bag.

The trade for that big, slow bullet is bore size. A .45 can runs a wider bore and a larger tube than a 9mm can, which is why the round cans here sit at 1.37 to 1.48 inches in diameter and why you almost always need suppressor-height sights to see over them. A .45-bore can also runs the lower-pressure pistol calibers like 9mm and .40 with the right piston, so a single .45 stamp can cover those hosts too. 10mm runs hotter than any other common pistol round, so mount it only on a can explicitly rated for it, such as the Rugged Obsidian 45 or Banish 45. If 9mm is your primary caliber and .45 is secondary, start with our best 9mm suppressor guide and pick a .45-bore multi-caliber can from this list only if the .45 host is the one you shoot most.

.45 ACP Suppressor Comparison: Sound, Size, and Rating

Match the can to the job. Measured sound is close across the dedicated .45 cans because the caliber is already subsonic, so weight, length, serviceability, and full-auto rating usually decide the buy. Sound figures come from consistent third-party testing where published; host and ammunition shift the result more than the can alone.

Rugged Obsidian 45
10.7 / 12.8 oz
Sound / Design~129 dB (quietest measured)
Length6.7 / 8.6 in
User-ServiceableYes
Full-AutoYes (belt-fed)
SilencerCo Osprey 45 2.0
9.2 oz
Sound / Design~130 dB (offset)
Length8.06 in
User-ServiceableNo
Full-AutoNo
Dead Air Mojave 45
10.44 / 12.7 oz
Sound / DesignLow backpressure
Length6.812 / 8.6 in
User-ServiceableNo
Full-AutoYes
HUXWRX Flow 45M
5.4 / 7.4 oz
Sound / DesignFlow-through
Length6.3 / 8.5 in
User-ServiceableNo
Full-AutoYes (mag-fed)
Banish 45
9.6 / 11 oz
Sound / DesignBaffle stack
Length6.7 / 8.6 in
User-ServiceableYes
Full-AutoYes
SilencerCo Omega 45K
10.7 oz
Sound / DesignWelded Stellite
Length6.39 in
User-ServiceableNo
Full-AutoYes
Griffin Revolution 45
10.2 / 13.3 oz
Sound / DesignBaffle stack
Length6.56 / 8.81 in
User-ServiceableYes
Full-AutoYes
Dead Air Ghost 45
9.6 / 12 oz
Sound / DesignStainless baffle
Length6.2 / 8.75 in
User-ServiceableNo
Full-AutoYes
SilencerCo Hybrid 46M
12.2 / 14.9 oz
Sound / Design.46 bore, multi-cal
Length5.78 / 7.72 in
User-ServiceableNo
Full-AutoYes
Banish 46-V2
15.3 oz
Sound / Design.46 bore, multi-cal
Length8 in
User-ServiceableYes
Full-AutoLimited

How to Pick a .45 ACP Suppressor

Because .45 is already quiet, the decision comes down to four variables: sight clearance, backpressure, weight, and whether you can clean the can yourself. Weigh them against how you actually shoot before you commit to a stamp.

Sight clearance

A round .45 can with a 1.37-to-1.48-inch tube blocks standard pistol sights, so you plan on suppressor-height sights with every can here except one. The SilencerCo Osprey 45 2.0 is the exception: its eccentric offset body drops the baffle stack below the bore axis, so on many hosts you can still get a usable sight picture over your standard sights. If you do not want to swap sights, the Osprey is the pick. The mounting and sight setup for the round cans is covered in our pistol suppressor setup guide.

Backpressure

Backpressure is gas pushed back into the action and your face, and it is the comfort difference on a semi-auto .45 pistol or PCC. The Dead Air Mojave 45 uses its Triskelion Gas Management System to cut back pressure, and the HUXWRX Flow 45M vents gas forward through a flow-through baffle path for the same reason. If gas blowback on a suppressed .45 is the problem you are solving, weigh one of those two first.

Weight and length

On a pistol, weight hangs off the muzzle and drags the front sight down. The HUXWRX Flow 45M at 7.4 oz full length is the lightest full-size .45 can here, and the SilencerCo Osprey 45 2.0 at 9.2 oz is the lightest of the round cans. For the shortest package, the SilencerCo Omega 45K is a fixed 6.39 inches. The heavier stainless and big-bore cans like the Griffin Revolution 45 (13.3 oz) and Banish 46-V2 (15.3 oz) buy durability or caliber range at the cost of muzzle weight.

Serviceability and rating

.45 ACP burns dirty and lead-fouls, so a can you can take apart is a real advantage on a range gun. The Rugged Obsidian 45 and Banish 45 disassemble to the baffle for cleaning; sealed-core cans like the SilencerCo Omega 45K, Dead Air Mojave 45, and SilencerCo Osprey 45 2.0 keep the baffles factory-serviced instead. On rating, most cans here are full-auto rated and the Obsidian 45 is belt-fed rated, but the SilencerCo Osprey 45 2.0 is not rated for sustained full-auto fire. If you run a subgun host, stay on the full-auto-rated cans.

Thread, Piston, and Booster: Getting the .45 Mount Right

The .45 ACP thread standard is .578x28, and most cans here ship on a .578x28 piston. The mount type your host needs depends on whether the barrel tilts. Get this wrong and the gun will not cycle.

Tilting-barrel pistols need a piston or booster

A Glock 21, 1911, or any Browning tilting-barrel .45 needs a spring-loaded piston, also called a booster or Nielsen device, so the barrel can unlock and cycle with a can hanging off the muzzle. The Rugged Obsidian 45 and Dead Air Mojave 45 ship with the piston for exactly this; multi-caliber cans also accept a 1/2x28 piston to run a threaded 9mm host on the same suppressor. For the host side of the setup, see our best .45 ACP pistols guide.

Fixed-barrel hosts and PCCs use a fixed spacer

A .45 PCC, a fixed-barrel pistol, or a subgun does not move the barrel during the cycle, so it takes a solid fixed spacer instead of a piston. The modular cans here swap between the two: the Rugged Obsidian 45, Dead Air Ghost 45, and HUXWRX Flow 45M run a piston on your pistol and a fixed mount or HUB adapter on your carbine so one stamp covers both. The QD, ASR, HUB, and piston ecosystems behind these cans are broken down in our suppressor mounting systems guide.

Match a Can to Your .45 Host

A can only mounts once your host has a threaded muzzle, so start from a threaded .45 pistol or PCC. Drop one into the rifle builder to see which of these cans fits, then compare two picks side by side at /compare if you are torn between the quietest can and the lightest one.

2026 Reality Check

The Tax Is Gone and the Wait Is Days

Buying a .45 can in 2026 is faster and cheaper than it has ever been. The two barriers that kept people out of suppressors for decades, the $200 tax and the year-long wait, are both gone.

  • $0 federal NFA tax. The One Big Beautiful Bill Act, signed in July 2025 and effective January 1, 2026, zeroed the federal making and transfer tax on suppressors, SBRs, SBSs, and AOWs. There is no $200 stamp on a .45 can anymore. If a source still cites one, it is stale.
  • eForm 4 in days, not months. As of 2026, electronic Form 4 approvals on suppressors are commonly running on the order of days to a couple of weeks. The 6-to-12-month waits you remember are pre-2025 history.
  • The paperwork still exists. Zeroing the tax did not deregulate the NFA. You still file an ATF Form 4 (or Form 1 to make your own), submit fingerprints and a photo, pass a NICS background check, and register the can in the NFA registry.
  • State law still applies. Suppressors are legal in 42 states. California, Delaware, Hawaii, Illinois, Massachusetts, New Jersey, New York, and Rhode Island restrict or ban civilian ownership. The federal tax change did not touch state law.

New to the process? Follow our step-by-step how to buy a suppressor walkthrough for the full Form 4 process, individual vs trust, current eForm wait times, and state-by-state legality. Several cans here, including the Banish 45 and Banish 46-V2, are sold and NFA-processed direct by Silencer Central, which is the simplest single-vendor path for a first can.

Frequently Asked Questions

▶What is the quietest .45 ACP suppressor?
The Rugged Obsidian 45 is the quietest .45 ACP suppressor in consistent third-party testing, metering around 129 dB on standard 230-grain loads. .45 ACP is naturally subsonic, so a full-length large-bore can like the Obsidian 45 or the SilencerCo Osprey 45 2.0 (~130 dB) turns a full-size 1911 or Glock 21 into a genuinely quiet host without any special ammunition. Cross-brand decibel numbers are directional because they are not all metered on one rig, but the Obsidian 45 is the most defensible quietest pick.
▶Is .45 ACP good for suppressing?
Yes. Standard 230-grain .45 ACP travels around 830 to 900 feet per second, well below the roughly 1,125 fps sound barrier, so it is inherently subsonic with no supersonic crack to suppress. That is the whole appeal of a suppressed .45: you get a quiet, subsonic experience straight from factory ammo, where 9mm often needs dedicated subsonic loads to match it.
▶Do you still pay a $200 tax stamp for a .45 suppressor?
No. The federal making and transfer tax on suppressors is now $0 under the One Big Beautiful Bill Act, effective January 1, 2026. You still file an ATF Form 4, submit fingerprints, and pass a NICS background check, but the $200 stamp is gone. Current eForm 4 approvals are running on the order of days to a couple of weeks, not months.
▶Do I need suppressor-height sights for a .45 ACP can?
Usually yes for a round can, because a 1.37-to-1.48-inch diameter tube blocks standard sights. The exception is the SilencerCo Osprey 45 2.0, whose eccentric offset design drops the baffle stack below the bore axis so you can often still get a usable sight picture over standard sights. If you run any of the round cans here, plan on a set of suppressor-height sights.
▶What thread pitch does a .45 ACP suppressor use?
The .45 ACP standard is .578x28, and most .45 cans here ship on a .578x28 piston. On a tilting-barrel pistol like a Glock 21 or 1911 the can mounts through a piston or booster (Nielsen device) that lets the barrel cycle; fixed-barrel hosts and PCCs use a fixed spacer instead. Multi-caliber cans also accept 1/2x28 pistons to run 9mm on the same suppressor.
▶Can one suppressor cover both 9mm and .45 ACP?
Yes. A .45-bore can such as the Rugged Obsidian 45, Banish 45, or SilencerCo Osprey 45 2.0 runs 9mm through .45 ACP by swapping the piston to the correct thread pitch. The .45 bore is oversized for 9mm, so you give up a few decibels versus a dedicated 9mm can, but a single stamp covering both calibers is the practical do-everything path for most pistol shooters.
AB
ABAuthor

Avid shooter with 10+ years of experience including competition shooting, and an associate member of the Professional Outdoor Media Association (POMA). Built 10+ AR-pattern rifles and several handgun platforms for home defense, competition, and suppressed night shooting.

10+ years shooting experienceCompetition shooterBuilt 10+ AR-pattern riflesAssociate member of the Professional Outdoor Media Association (POMA)

This page contains affiliate links. Purchases through these links support the site at no extra cost to you. Read the affiliate disclosure

Related guides

Continue exploring with these related resources

View all guides →
Best Suppressor-Height Sights 2026: Pistol & AR Co-Witness
PistolRifle

Best Suppressor-Height Sights 2026: Pistol & AR Co-Witness

Suppressor-height (tall) iron sights co-witness over a slide-mounted red dot and clear a can. Pistol sets are cut for a specific slide dovetail, so we organize by host: Glock, SIG, HK VP9, FN 509, S&W M&P, Springfield Hellcat, plus the truth about AR back-up sights on a suppressed carbine.

Read guide
Best 9mm Suppressors 2026: Pistol, PCC & MP5 Hosts Ranked
SuppressorPistol

Best 9mm Suppressors 2026: Pistol, PCC & MP5 Hosts Ranked

Ten 9mm suppressors ranked across pistol, PCC, and MP5-pattern subgun duty, with verified specs, sound ratings, mounting paths, and the booster-versus-fixed-spacer breakdown every buyer needs.

Read guide
Best Glock Chassis Systems & Conversion Kits 2026
PistolPDW

Best Glock Chassis Systems & Conversion Kits 2026

Eight Glock chassis systems ranked, from the budget CAA MCK to the bullpup Meta Tactical Apex, with clear brace-vs-stock legal guidance and what each Glock model actually fits.

Read guide

Latest News & Reviews

Related articles and industry updates

View all articles →
What to Stock Up on Before Prices Spike: A Supply Chain Preparedness Checklist
ComparisonAR-15

What to Stock Up on Before Prices Spike: A Supply Chain Preparedness Checklist

Oil infrastructure attacks, AI-driven semiconductor demand, and geopolitical instability are creating supply chain pressure on ammunition, optics, and emergency gear. Prioritized buying checklist: ammunition, magazines, optics, spare parts, and general emergency preparedness.

Mar 1814 min
Read article
S&W Bodyguard 2.0 RFX1: Factory Green Dot at $599
NewsSmith & Wesson

S&W Bodyguard 2.0 RFX1: Factory Green Dot at $599

Smith & Wesson now ships the Bodyguard 2.0 with the Viridian RFX1 green dot installed at the factory. The NTS, TS, and broader-compliance SKUs all list at $599 MSRP and keep the same micro .380 frame, magazines, and 2.75-inch barrel.

Jul 710 min
Read article
Staccato HD P4X: 18+1 Steel-Frame Comp 2011 From $3,599
NewsStaccato

Staccato HD P4X: 18+1 Steel-Frame Comp 2011 From $3,599

Staccato launches the HD P4X: a full-size, steel-frame 2011 with 18+1 capacity, a one-piece 4-inch compensated barrel, and Glock-pattern magazines. Starts at $3,599; ships to dealers July 13, 2026.

Jul 48 min
Read article