HB Industries CZ Scorpion EVO 3 Delta Trigger
Drop-in skeletonized recurve trigger with +5mm forward set that cuts factory pull weight by roughly 12 percent.
- Price
- $38
- Weight
- 0.4 oz
- Brand
- HB Industries
- Category
- Triggers
Featured in
Features
- •6061-T6 billet aluminum, hardcoat anodized
- •Skeletonized recurve face
- •+5mm forward set for added leverage
- •~12% pull-weight reduction vs factory
- •Black, Burnt Orange, or Red finish
Capability Boosts
Recommended For
+11 more
More PCC guides & articles
Guides
Overview
The HB Industries Delta is a shoe-only trigger upgrade for the CZ Scorpion EVO 3 that addresses two factory complaints at once. The recurve face cradles the trigger finger and keeps it centered through the long Scorpion stroke. The +5mm forward position increases leverage on the factory hammer pack for a roughly 12 percent reduction in pull weight without touching the hammer or springs.
Construction is billet 6061-T6 aluminum hardcoat anodized to MIL-A-8625 Type 3, finished in Black, Burnt Orange, or Red. The Delta drops in with the included roll pin and counts toward 922R compliance. It fits every CZ Scorpion EVO 3 and EVO 3+ pistol and carbine.
Pair the Delta with the HBI Reduced Weight Trigger Spring Kit for the cheapest path to a sub-6 lb Scorpion pull. Owners who want a flat face instead of a curve can pick the Theta Forward (same +5mm offset) or Theta Stock (factory geometry) for the same price.
Key Features
- Skeletonized recurve trigger face
- +5mm forward set increases hammer leverage
- ~12% reduction in factory pull weight
- Drop-in install with included roll pin
- Black, Burnt Orange, or Red anodized finish
- 922R compliant
- Fits CZ Scorpion EVO 3 and EVO 3+ pistols and carbines
Pros
- +Cheapest meaningful Scorpion trigger upgrade
- +Recurve geometry centers the finger for consistent follow-ups
- +Forward set adds real leverage, not just a different feel
- +Drop-in, no fitting or hammer-pack work
- +Counts toward 922R compliance
Cons
- −12% pull reduction is meaningful but not dramatic
- −Cannot change pull character on its own (still single-stage)
- −For a sub-5 lb pull, pair with the Reduced Weight Spring Kit
Detailed Specifications
- Material
- 6061-T6 billet aluminum
- Finish
- MIL-A-8625 Type 3 hardcoat anodize
- face
- Skeletonized recurve, +5mm forward
- pullWeightChange
- ~12% reduction on factory springs
- finishes
- Black, Burnt Orange, Red
- install
- Drop-in with included roll pin
- compliance
- 922R compliant, made in USA
- msrp
- $38
Similar Products
Compatible Platforms
Compatibility Tags
Build Your Custom Configuration
Add the HB Industries CZ Scorpion EVO 3 Delta Trigger to your build and see how it enhances your platform.