Triggers

Drop-in forced reset trigger with 3-position safety for rapid follow-up shots

Precision-machined two-stage AR trigger with crisp break

Enhanced two-stage trigger for precision AR shooting

The original forced reset trigger with an ambidextrous 3-position safety and full hardware kit

Match-grade assisted reset FRT, a refinement of the Disruptor with a cleaner 3-3.5 lb pull and 17-4 stainless internals

Two-stage match trigger

Single-stage AK trigger with Lightning Bow shoe for AK47 and AK74 variant platforms.

Self-contained drop-in forced reset cassette that runs in a stock HK roller-delayed housing across the MP5 and G3 families

Active-reset disconnector swap that adds forced reset behavior to a mil-spec AR-15 fire control group

Ambidextrous-safety version of the Disruptor FRT for left-handed and switch-shoulder shooters

Drop-in single-stage AK trigger module with crisp reset and multiple shoe/pull-weight variants.

Forced-reset trigger system for the PS90 with nitrided 17-4 stainless hammer and sear, plus a 3-position aluminum selector.

Binary firing system for CZ Scorpion: fires one round on pull and one on release

Binary firing system for Grand Power Stribog: one round on pull, one on release with a three-position safe/semi/binary selector.

Drop-in forced reset trigger assembly for the Ruger 10/22 with adjustable reset distance and pull weight.

Spring-loaded forced reset trigger parts kit for stamped AKM-pattern receivers; requires fitting and selector clearance.

Drop-in two-stage forced reset trigger for the HK MP5 family with an ambidextrous selector for pictogram-marked frames

Drop-in 3-position forced reset trigger for the B&T SPC9, GHM9, and GHM45; factory-installed in B&T USA SPC9 and GHM9 models

Conventional single-stage AR trigger with a 3.5-pound pull and included anti-walk pins.

Complete CNC aluminum drop-in trigger housing for the Ruger 10/22 with the Ultimate Trigger Kit, Cornerstone rotary safety, Fireswitch mag release, and Bolt Keeper pre-installed.

Drop-in assisted reset trigger pack built specifically for B&T SPC9, GHM9, and GHM45 lowers

MFR56-specific Disruptor with a longer toggle engineered for the belt-fed upper's action.

Ambidextrous-safety version of the LAT match-grade FRT for left-handed and switch-shoulder shooters

Machined 316 stainless forced reset trigger that covers both Cobray and MPA MAC-pattern hosts.

Hardened steel reset lever plus a 3-position selector that gives the MPA Defender a real semi mode and an A.R.T. mode.

Steel 2-position active reset system for closed-bolt 9mm MAC-pattern guns, tested on Cobray/SWD M-11/9, Leinad, VMAC9, and MPA30 hosts.

Geissele's sister brand polished mil-spec with nickel boron / nickel teflon coating

The only forced reset trigger made for the Beretta Cx4 Storm; requires a permanent notch cut in the bolt.

Single-stage flat drop-in trigger group with a hammer reshaped and hardened for 9mm PCC blowback

Value-priced 304 stainless reset-assist trigger for the KRISS Vector that ships with two sears to match fire-control tolerance variance.

Billet aluminum drop-in replacement for the factory PS90 polymer trigger shoe.

Pull-and-release dual-tap trigger system for the IWI X95 that fires one round on the squeeze and a second on the release.

Flagship reset-assist trigger for the KRISS Vector with a 4130 steel body and an included selector cam that adds a third functional position.

Drop-in reset-assist trigger system for the PS90 with a 7075 aluminum assembly and a 3-position carbon-fiber-polymer selector.

Two-stage AK fire-control group with shortened travel and hammer-stop geometry to reduce trigger slap.

Binary firing system for the B&T APC9: one round on pull, one on release, with a three-position safe/semi/binary selector.

Billet 6061-T6 aluminum flat trigger for the Kuna, offset 4mm rearward for AR-standard length of pull.

Custom sear-spring kit that reduces Mini-14 and Mini-30 factory trigger pull weight by approximately 30%.

Forced reset trigger parts kit for AKM-pattern rifles; requires fitting, not a drop-in cassette.

Drop-in complete MP5 lower with a pre-installed AR fire control group and a Hoffman 3-position Super Safety selector for turnkey forced reset

Drop-in forced reset trigger for the Ruger PC Carbine and PC Charger, using the factory 9mm trigger housing.

AR-9 forced reset selector kit bundling the Super16 selector, anti-walk pins, a KynShot hydraulic buffer, and a pre-cut 9mm BCG; works with your existing mil-spec trigger.

Drop-in two-stage forced reset trigger for the HK MP5 family with classic SEF-pattern selectors

Drop-in National Match trigger and competition hammer set that brings a clean, adjustable 4.5 lb break to the M1A without a gunsmith.

Trigger shoe, S-7 tool steel hammer and sear, and redesigned trigger return spring for the Ruger 10/22 factory housing. Lands the pull just above or below 2 lb.

Flat-faced skeletonized aluminum trigger shoe for the Ruger 10/22 factory trigger housing. Cuts pull weight by up to half a pound and adds a post-travel adjustment screw.

Plug-and-play forced reset trigger for the Norinco SKS in 7.62x39, the only FRT made for the platform.

Three-position AK assisted reset cassette with compatibility listed by SKU.

A $40 Twitch tested only on MPA Defenders and sold explicitly as a beta builder's component.

Drop-in sear modification that cuts AUG trigger pre-travel, sharpens the break, and halves reset time for a near match-grade feel.

Six printed carbon-fiber-reinforced MAC forced reset triggers for $40, the cheapest way to test fitment.

Platform-specific forced-reset trigger kit for compatible semi-auto Browning 1917 and 1919 builds.

Geissele HK MR556 two-stage trigger machined by AS Designs for ARC-Fire selector clearance

Titanium bolt-carrier slip trip that enables forced reset on an MP5 running an AR Super Safety lower

Billet AR-FCG MP5 lower full kit machined for the AS Designs Super Safety or Arc-Fire selector

Factory aluminum complete lower trigger group that replaces the APC9 Pro polymer lower with a metal housing and a crisper, more consistent pull.

BCM's nickel-teflon enhanced mil-spec with hand-polished sear surfaces

Send-in trigger pack service that drops the Hellion's factory ~7 lb pull to 4-4.5 lb and removes 90% of post-wall trigger travel.

Three-piece drop-in assisted reset lever kit for the B&T TP9, listed for both rotating-safety and crossbolt-safety models.

CMC's CCT trigger without the drop-in housing, installed as separate components with an assembly tool.

CMC's Combat Curved bow in the self-contained drop-in housing, offered from 2.5 lb to 6.5 lb.

Drop-in single stage AR trigger with clean break

Low-cost carbon-fiber-reinforced drop-in forced reset trigger for the rimfire HK MP5 .22 LR

Stainless forced reset trigger for the rimfire HK MP5 .22 LR, built as a permanent install with friction-fit retention

Reset-assist FRT for the KRISS Vector built around a fully machined three-position safety cam and an FRT trigger assembly.

Assisted-reset trigger kit built for the HK G36 .22LR, running a two-position SAFE to ASSISTED RESET layout in place of the factory semi-auto position.

Simpler, lower-cost reset-assist trigger for the KRISS Vector that keeps the factory selector cam and runs two functional positions.

Adjustable match-grade AR trigger with needle bearings

Budget roller-and-spring reset-assist device for the KRISS Vector, the cheapest way to add reset assistance to the platform.

Value-priced two-part forced-reset kit with a 3-position selector for the FN PS90.

AR-15 mil-spec pattern drop-in FCG with nickel Teflon coating for the Extar EP9/EP45

Two-stage AR-15 pattern trigger with nickel boron coating for Extar EP9/EP45, the premium OEM trigger upgrade

Drop-in AR-15 binary trigger with a three-position selector: Safe, Semi-Automatic, and Echo mode (one round on pull, one on release). Requires a full-auto (M16-cut) bolt carrier, not a proprietary one.

Bare three-position binary trigger for most Ruger 10/22-pattern rifles, with a curved bow.

Complete 10/22 binary trigger pack with the 22-C1 mechanism pre-installed in a billet aluminum housing.

Drop-in 10/22 binary trigger pack with pre-installed components in a polymer housing.

Affordable AR-pattern binary trigger that fires one round on pull and one on release, with a mil-spec style single-sided safety selector aimed at AR traditionalists.

Curved three-position binary trigger for the Ruger PC Carbine and PC Charger.

Lifetime-warrantied 4140 steel Twitch for the MPA Defender, with FTA's transparent note on the open-source design's beta-phase testing.

MCX-specific two-stage trigger derived from the CRANE-certified SSA, 4.25-4.75 lb non-adjustable pull

Two-stage drop-in fire control pack that replaces the X95's mushy factory bullpup linkage with a defined break.

Two-stage match trigger module for the FN SCAR family with a 3.2 to 4.6 lb total pull.

B&T TP9(N)-specific semi-auto trigger upgrade with a shorter pull and short reset.

Drop-in flat-faced billet trigger that cuts factory take-up by 35% and nearly eliminates over-travel.

Drop-in skeletonized recurve trigger with +5mm forward set that cuts factory pull weight by roughly 12 percent.

Budget spring-only pull-weight reduction for the Scorpion that keeps the factory hammer and sear geometry.

Two-spring kit that drops the Stribog SP9A1/SP9A3 factory pull from 6.0-6.5 lb to 4.5-5.0 lb with no hammer or sear changes.

Value single-stage drop-in built PCC Blowback Tough with a hammer-collision bumper

Single-stage Mini-14 and Mini Thirty trigger kit with 1 lb or 3 lb pull and adjustable sear and disconnect engagement.

Match two-stage drop-in trigger for the Ruger 10/22 with a factory-configured 6 oz to 2.5 lb pull-weight range.

Complete 15-piece Sub 2000 trigger overhaul: aluminum trigger shoe, performance trigger bar, extended mag release, stainless feed ramp, spring kit, and all install tools.

Spring-only trigger kit for the Kel-Tec Sub 2000 that cuts the factory pull from roughly 9-10 lbs to about 4.75 lbs. The default first upgrade most owners start with.

Drop-in spring kit that tunes the factory Ruger LC Carbine and LC Charger trigger, not a complete trigger group.

Spring-only trigger tuning kit for the Ruger PC Carbine, best treated as a budget feel upgrade rather than a complete trigger replacement.

CNC-machined flat-face trigger shoe for the M&P FPC that shortens perceived reach and cleans up the factory break.

Hammer, sear, and firing-pin spring set that drops the 9mm FPC's pull weight roughly 40%, the cheapest meaningful FPC upgrade.

Beryl-specific forced reset trigger built for FB Radom Beryl fire-control pockets.

TP9-specific reciprocal-reset system built into a replacement metal upper with a new trigger shoe and safety device.

The best-built version of the open-source Twitch design: 4140 pre-hardened steel, caliber-specific, one week out.

B&T TP9 assisted reset parts kit with a CNC steel reset lever, slip trip, and enhanced connector.

Wolff reduced-power 27.5 lb hammer spring and reduced-power sear spring that lightens the SKS trigger pull without a trigger group swap.

Budget 316 stainless forced reset trigger for the Ruger 10/22 that installs into the factory or BX trigger pack with hand-fitting.

Stainless steel reset-assist device for the KRISS Vector with broad generation fitment and a break-in-heavy install.

Drop-in insert that removes PS90 trigger pre-travel and lateral play and limits back-travel for a faster reset.

Drop-in forced reset trigger for the HK MR556 and MR223, in curved or flat blade

Active-reset lever and spring kit for Ruger OEM and BX trigger packs, with practice levers for fitting.

Factory drop-in trigger module for the Ruger 10/22 and 22 Charger. Single-stage break around 2.75 lb with no fitting required.

Hand-fit active reset lever kit for Ruger PC9 and PC40 factory trigger packs, with three tuning cams.

Schmid-made nickel teflon mil-spec trigger sold through AR parts retailers

Factory Steyr Arms enhanced trigger spring kit that reduces felt AUG trigger pull weight by 2 to 3 pounds.

Flat-faced skeletonized trigger shoe for the Ruger PC Carbine and PC Charger with minimal pre-travel and an over-travel adjustment screw.

Purpose-built single-stage drop-in engineered to survive 9mm PCC blowback bolt speed

Drop-in single-stage trigger for CZ Scorpion EVO 3 with adjustable 3-3.5 lb or 5-5.5 lb pull

Single-stage drop-in trigger for the Ruger American Gen II Centerfire, adjustable 2-4 lb and set at 3 lb from the factory, in a choice of curved or straight trigger shoe.

Drop-in single-stage trigger for the SIG MPX, factory tuned to a 4.5 lb pull

Two-stage drop-in trigger for Ruger American Centerfire rifles, roughly 1.5 lb total pull, covering both Gen I and Gen II actions.

Two-stage drop-in trigger for the Ruger Precision Rifle centerfire, with an 8 oz first stage into a crisp wall and a light adjustable second stage, about 1 lb total pull at its lightest.

MCX-specific adaptable trigger with adjustable 2.5-5.0 lb pull and TriggerTech frictionless-release feel

Competition-oriented Tikka single-stage trigger adjustable from four to 32 ounces.

Single-stage Tikka trigger with a broad one-to-3.5-pound adjustment range.

Complete full-size AP5 / MAC5 / ZF5 / POF5 trigger housing with Trinity's forced reset system, a TPU buffer, and an MP5 trip

Complete AP5-P / MAC5K / ZF5K / POF5K trigger housing with Trinity's forced reset system and an MP5 trip

Complete full-size HK SP5 trigger housing with Trinity's forced reset system installed, a TPU buffer, and an MP5 trip

Complete HK SP5K trigger housing with Trinity's forced reset system and an MP5 trip, built for K-length timing

Forced reset trip kit and trigger for MP5-pattern guns running an AR fire control group lower

Complete PTR 9K / SK trigger housing with Trinity's forced reset system and an MP5 trip

PA-6 carbon-fiber nylon rapid reset system for the Umarex-made HK MP5 .22 LR, the low-cost way to dial in fitment

Steel rapid reset system for the Umarex-made HK MP5 .22 LR that works with the factory two-position safety

Made-to-order MPA Defender FRT you spec in printed polymer, aluminum, or steel, backed by lifetime parts replacement.

Complete CNC-machined drop-in trigger group for the Ruger 10/22 with a 2.25 lb break and adjustable pretravel/overtravel.

Complete adjustable trigger group for Ruger PC Carbine and PC Charger in 9mm and .40 S&W.

Fully assembled Kevlar and carbon-fiber MP5/MP5K lower built for Super Safety forced reset

Aluminum bolt-carrier slip trip for MP5-family hosts running a compatible Super Safety lower

Self-contained two-stage Tactical Trigger Unit built for 9mm blowback bolt speed and durability

Budget floor for triggers that don't suck, polished and inspected mil-spec

Self-contained two-stage AR trigger with a flat bow, factory-set break, and included anti-walk pins.

Complete billet-aluminum drop-in trigger unit for fixed-receiver 10/22-pattern rifles, factory-configured from 1.5 to 5 lb.

Single-stage curved bow trigger with TriggerTech Zero Creep Technology

Single-stage flat bow trigger with TriggerTech Zero Creep Technology

Adjustable drop-in Remington 700 trigger with 2-4 lb pull range and Elite Hunter sear engagement lock design.

Complete drop-in 10/22 trigger assembly with a fixed 2.75 lb no-creep pull and integral extended magazine release.

Premium Remington 700 pattern trigger family with externally adjustable pull weight and TriggerTech's low-creep roller release feel.