Best Dan Wesson DWX Accessories & Upgrades for 2026

Buy magazines first, grip panels second, and a DWX-specific holster third. Those three cover the parts every full-size DWX owner actually uses, they all have verified DWX fitment, and together they cost less than a single optic. The factory CZ P-10 F / P-09 / DWX Full Size 19-round magazine runs $52.49, Vytal's Euclids grip panels run $84.95, and the Red Hill Tactical DWX competition holster runs $81.99.

Everything after that is conditional on your specific gun. An optic plate only applies if you own the factory optics-ready slide, and a magwell only applies if you shoot a division that permits one. Neither is a general DWX upgrade, and buying either without checking the condition first is how DWX owners end up with a part they cannot install.

No 2011 part is a safe buy for a DWX, and the reason is the frame. The DWX is a hybrid, and the hybrid line runs right through the parts catalog. From the 1911 it takes the single-action fire control group, the flat trigger, and the bilateral thumb safety that lets it carry cocked and locked. From the CZ side it takes a double-stack steel frame, CZ-style lockup and takedown, and CZ magazines. What it does not take from either side is the 2011 architecture: there is no separate polymer grip module bolted under the frame to supply the grip, trigger guard, and magazine well, and there are no 2011 magazines. The DWX frame is one piece, and it wears bolt-on grip panels the same way a 1911 does.

That matters because the 2011 aftermarket is enormous and the DWX aftermarket is not, so search results constantly push 2011 parts at DWX owners. Grip modules, 2011 magazines, and 2011 magwells are all dead ends here. The parts that do fit come from two places: CZ-USA, for magazines, and a small group of shops that machine DWX-specific hardware.

Be precise about which aisle, though, because 1911 and 2011 are not the same shelf. Dan Wesson built the DWX with a 1911-style dovetail front sight and a CZ Shadow 2-style rear, and states that many aftermarket CZ and 1911 components, sights included, will fit. So the 1911 side of the store is genuinely useful for sights and fire control parts, and the CZ side is where magazines, grip panels, and magwells live. It is specifically the 2011 double-stack architecture, the grip module and the magazines and magwells built around it, that has nothing to sell you. If you want to see how a true 2011 parts ecosystem compares before committing to the DWX, the best 2011 pistols guide covers the Staccato and SIG P211 platforms, and the budget 2011 guide covers the sub-$1,000 end where magazine pattern decides everything. Neither of those magazine ecosystems carries over to the DWX.

The full-size DWX feeds CZ P-09 and P-10 F-pattern 9mm magazines, and the current factory part is CZ-USA SKU 11440, listed as MAG CZ P-10 F, P-09, DWX Full 9MM 19RD at $52.49. Nineteen rounds in the magazine is the whole reason the DWX exists: it is a 1911 trigger with double-stack capacity, and it gets there on mass-produced CZ magazines instead of proprietary 2011 sticks. That is the cheapest part of owning this pistol.

CZ also builds the same pattern as a 21-round magazine, SKU 11443, at $52.49. It uses an extended plastic base that stands proud of the frame rather than sitting flush, which buys two rounds for Limited and Open shooters and does nothing for anyone capped at 15 in USPSA Production or IPSC Production Optics. Build the match stack out of 19-rounders and add 21s only if your division rewards the count.

Minimum magazine count by use: Range and training, six to eight so a practice block runs without stopping to reload on the bench. Local matches, six to eight loaded before the first stage. Major matches, ten to twelve so you never load between stages. Keep a separate practice stack from the match stack; a tired practice spring belongs in a drill, not on the clock.

Fitment: Buy the current 11440 SKU rather than any P-09 magazine you find. Legacy P-09 magazines with thicker base plates are reported not to lock into a DWX, so the shared current-production part is the safe order. The DWX Compact does not use this magazine at all; it runs CZ 75 Compact-pattern 15-round magazines, sold as SKU 11451 and listed for the CZ 75 Compact and Dan Wesson DWX Compact. Confirm which frame you own before ordering, because the two magazine systems have no overlap.

Both DWX optic plates require the factory optics-ready DWX slide. The standard full-size DWX, model 92001, ships with a fiber-optic front sight, an adjustable rear, and a solid slide with no optic cut, and no adapter plate can change that. Converting an uncut slide is a milling job, not a parts purchase, so read your own slide before you read the plate listings.

On an optics-ready DWX, the C&H Precision DW-DWX-RSH ($143.49) is the plate with the broadest optic list: Trijicon RMR, RMR HD, and SRO plus Holosun 407C, 507C, 507Comp, and 508T, and the C&H COMP. It is machined from 6061 aluminum, Type III hard-coat anodized, and ships with stainless hardware and C&H T-posts, which is the detail that separates it from cheaper plates. C&H's case for the T-post interface is that it carries recoil load the mounting screws would otherwise take alone.

The Impact CNC Machine ICM-1050 ($75) is the value pick and roughly half the price. It is carbon steel with a nitride finish rather than anodized aluminum, covers the RMR, SRO, RMR HD, 407C, 507C, and 508T, and ships with hardware plus a published install spec of 13 to 14 inch-pounds with blue Loctite 243. Follow that torque figure; RMR-pattern plates are the classic place where guessing at screw tension costs you a zero. Buy the C&H plate if your optic is on its longer list or you want the T-post interface, and the ICM plate if you run a common RMR-footprint dot and want the money back.

Vytal Manufacturing makes the two DWX-specific grip panel sets, and both come in a Full Size or Compact frame selection you pick on the product page. The Euclids ($84.95) are the thin-profile set, which is the point on a double-stack frame: they pull grip circumference in so shorter fingers reach the trigger and the controls without rolling the gun. The Euclid texture sits in the middle of Vytal's range, aggressive enough to index under recoil and mild enough for a long range session.

The Krakens ($94.95) are the machined 6061 aluminum set with a Type II anodized finish and a sculpted texture. Aluminum panels give a harder, crisper gripping surface than a polymer or composite panel and hold their edges over years of holster wear. The tradeoff is price and feedback: a rigid metal panel transmits more of what the gun is doing into your palm. Buy the Krakens if you shoot the DWX mostly in matches and want the crispest possible index on the frame. Buy the Euclids if you shoot high-volume practice sessions, where the thinner profile and softer texture are what your hand will still be happy with at round 400.

Two ordering notes apply to both sets. They are made to order and ship in roughly 15 business days, so order before match season rather than during it. Vytal also notes that some aftermarket parts may require fitting, which on bolt-on panels usually means minor relief work rather than a rebuild. Select the frame size that matches your pistol; the Full Size and Compact panels are separate products, not one set that spans both.

Check your grip screws before you order: Dan Wesson changed the thread partway through production, and it catches people. Per LOK, every DWX Compact frame uses 1911-threaded grip screws, while full-size frames built before serial X2302050 use 1911 threads and frames after it use CZ threads. LOK adds that frames close to that serial on either side can still have 1911 threads, so measure rather than assume: 1911 screws run about 0.148 inches in diameter, CZ screws about 0.134 inches. Pull one factory screw and measure it before adding screws to the order.

A magwell is the one upgrade here that carries conditions on both the gun and the rulebook, so read them before ordering. LOK's GridLOK aluminum magwell ($84.95, SKU CZTSMWGLA) is a CZ TSO / TS-series part that LOK also lists for the DWX Full Size. LOK's own wording is the important part: this magwell is made to fit CZ frames, and due to differences between the DWX and CZ frames, some DWX frames may experience fitment issues and require fitting. Order it expecting a fitting job, not a drop-in.

It is also a system change, not a single part. The magwell requires short grip panels, and factory magazine baseplates do not fit through it, so LOK points DWX buyers toward Henning bases. Budget for grips and a set of basepads on top of the $84.95 funnel itself. The payoff is real on a competition gun: 1.405 ounces of 6061 aluminum flaring the mag well catches an off-angle reload that would otherwise cost a second or two on the clock.

Check your division before you order. External magwells are prohibited in USPSA Production and Carry Optics, and legal in Limited, Limited Optics, and Open. LOK further states this magwell does not fit the IPSC or IDPA box, which rules it out anywhere that box is the gauge. If you shoot Production or Carry Optics, this part is not an upgrade you can use, and the money belongs in magazines and grips instead. For a look at what a mature competition parts ecosystem gives you on a CZ-pattern frame, the CZ Shadow 2 accessories guide covers the same categories with far more options.

Buy a holster whose product page names the Dan Wesson DWX. The Red Hill Tactical Dan Wesson DWX Competition Holster ($81.99, SKU RHT-DWDWXCOMP) is the model-specific competition shell: two layers of 0.080-inch Kydex, which is what keeps a race holster from flexing when you drive the gun in at speed, with adjustable retention.

It is configured rather than bought off a shelf. You choose strong hand, whether the shell clears a weapon light, retention hardware, and the mounting pattern, with QLS, ELS, Blade-Tech, G-Code 35, and Black Scorpion drop among the options. Pick the mount that matches the belt system you already own, because a competition holster is only as fast as the hanger it rides on. This is a match-day rig rather than a concealment holster; the DWX is a 43-ounce steel pistol, and the full-size gun belongs on a belt rack rather than inside a waistband.

A complete full-size DWX setup is short by modern competition standards. Six magazines, one set of grip panels, and a competition holster is the working configuration, and it lands near $81.99 for the rig plus $84.95 for the panels on top of the magazine stack. Add the plate only on an optics-ready slide, and the magwell only in a division that allows it.

You can stack the magazine, magwell, and grip picks against the cataloged DWX in our pistol builder to see the running total before you buy anything. Price the magazines, grips, holster, and magwell there, and treat an optic plate as a separate line that only applies once you have confirmed a factory optics-ready slide.