C&H Precision
C&H Precision EDC-XL
$224.99Holosun 507CRMR
RMR-footprint enclosed-emitter carry and duty optic with a larger sight window
Plates that fit this pairing
Springfield Prodigy optic footprint: what red dots fit
The Springfield Prodigy has no direct optic footprint. It uses the Agency Optic System: a pocket milled into the slide that takes a steel plate, with the red dot bolting to the plate instead of to the slide. AOS plates are machined from billet steel and each one carries an integral rear sight, so the plate is your backup sight as well as your optic mount. Springfield ships the pistol with a HEX Dragonfly compatible plate. The Trijicon RMR pattern, which also covers Holosun 407C, 507C and 508T class dots, mounts through an AOS plate cut for that footprint, and C&H Precision's V4 AOS plate for the Prodigy builds the rear sight into it.
Two things trip Prodigy buyers. The plate in the box is not the plate most people want, since Springfield fits a HEX Dragonfly compatible plate and an RMR-pattern dot needs a different one. And because the rear sight is machined into the plate, changing plates changes your rear sight, which makes the plate a sighting decision rather than a bare spacer. The good news is that there is no non-optic Prodigy slide to avoid: the 4.25-inch, 5-inch, and Comp models all ship as AOS guns.
- Optics that fit
- 22
- No plate needed
- 0
- Plate required
- 22
- Footprints accepted
- Trijicon RMR / Holosun 507C
Disclosure: This page contains affiliate links. We may earn a commission on purchases at no cost to you. Read the affiliate disclosure
Trijicon RMR / Holosun 507C(22)
Trijicon RMR / Holosun 507C optics mount on the Springfield Prodigy through a plate in that footprint. Bolt the plate into the slide first, then the optic to the plate.
Cyelee Optics
Cyelee Chameleon SRS8
$199.99Holosun 507CRMR
Slim RMR-footprint dot with a large 8 MOA reticle and Cyelee's STIG-RS lens treatment
Plates that fit this pairing
Gideon Optics
Gideon Optics Rock
$199.99RMR
RMR carry optic with 3 MOA dot and 45 MOA circle-dot choices in a shorter housing.
Plates that fit this pairing
Osight
Osight C (RMR Footprint, Side-Load Battery)
$179.99RMR
Open-emitter RMR-footprint red dot with a wide window, side-loading CR1632, and a switchable 3 MOA + 32 MOA MRS reticle.
Plates that fit this pairing
C&H Precision
C&H Precision COMP
$299.99Holosun 507CRMR
RMR-footprint open-emitter competition optic with a wide window and multi-reticle options
Plates that fit this pairing
C&H Precision
C&H Precision COMP Max
$339.95Holosun 507CRMR
Large-window RMR-footprint competition optic with 2 MOA dot and 38 MOA circle options
Plates that fit this pairing
Cyelee Optics
Cyelee Wolf EDG
$279.99Holosun 507CRMR
Fully enclosed RMR-footprint pistol dot with a gas-filled housing and side-loading CR1620
Plates that fit this pairing
Gideon Optics
Gideon Optics Granite Competition RMR
$249.99RMR
Large-window RMR competition optic with a 6 MOA red or green dot and 1 MOA adjustments.
Plates that fit this pairing
Gideon Optics
Gideon Optics Omega
$229.99RMR
Large-window RMR optic with 3 MOA dot and 45 MOA circle-dot reticle options.
Plates that fit this pairing
Holosun
Holosun 507C X2
$232.99Holosun 507CRMR
Multi-reticle micro red dot with solar failsafe and shake awake
Plates that fit this pairing
Holosun
Holosun 507C X3
$299.99Holosun 507CRMR
Third-gen multi-reticle pistol dot with photodiode sensor, Solar Failsafe, and RMR footprint
Plates that fit this pairing
Holosun
Holosun 508T X2
$369.99RMR
Titanium-housed open-emitter micro red dot on the RMR footprint with a larger window than the 507C.
Plates that fit this pairing
Osight
Osight 3 MOA Green (RMR, Magnetic Charging)
$229.99RMR
Original Osight reflex sight on the RMR footprint with a single 3 MOA dot, magnetic charging cover, and aluminum housing.
Plates that fit this pairing
Osight
Osight X (RMR Footprint, Magnetic Charging)
$229.99RMR
Open-emitter RMR-footprint red dot with a wide window, OAL housing, and a magnetic charging cover for rechargeable operation.
Plates that fit this pairing
Osight
Osight XE AMRS Enclosed (RMR Footprint)
$249.99RMR
Enclosed-emitter duty red dot on the RMR footprint with the AMRS five-reticle system and a field-swappable side-loading CR1632 battery.
Plates that fit this pairing
Osight
Osight XR Enclosed (RMR Footprint)
$299.99RMR
Duty-rated enclosed-emitter red dot on the RMR footprint with a 2/6+32 MOA multi-reticle system and a magnetic charging cover.
Plates that fit this pairing
Riton Optics
Riton 3 Tactix PRD 3
$329.99RMR
An RMR-footprint open dot with three selectable reticles, a 50,000 hour CR1632, IPX67 sealing, and a Picatinny adapter in the box at $329.99.
Plates that fit this pairing
Swampfox
Swampfox Kraken Closed Emitter
$249.99Holosun 507CRMR
Budget closed-emitter pistol red dot that ships with both RMR and Glock MOS plates
Plates that fit this pairing
Vector Optics
Vector Optics Frenzy FLEX Titanium
$211.65RMR
Titanium RMR-footprint pistol dot with a large aspheric window and selectable reticles
Plates that fit this pairing
Trijicon
Trijicon RCR
$718.99RMR
Trijicon's enclosed-emitter pistol red dot on the RMR footprint with top-load battery
Plates that fit this pairing
Trijicon
Trijicon RMR Type 2
$588.99RMR
The original pistol red dot that defined the category
Plates that fit this pairing
Trijicon
Trijicon SRO Green Dot
$639.99RMR
Green-LED 2.5 MOA version of the SRO announced May 2026: same wide circular window, RMR footprint, and top-loading CR2032, in black or coyote brown.
Plates that fit this pairing
Springfield Prodigy optic fitment FAQ
What optic footprint does the Springfield Prodigy use?
The Springfield Prodigy has no direct optic footprint. It uses the Agency Optic System: a pocket milled into the slide that takes a steel plate, with the red dot bolting to the plate instead of to the slide. AOS plates are machined from billet steel and each one carries an integral rear sight, so the plate is your backup sight as well as your optic mount. Springfield ships the pistol with a HEX Dragonfly compatible plate. The Trijicon RMR pattern, which also covers Holosun 407C, 507C and 508T class dots, mounts through an AOS plate cut for that footprint, and C&H Precision's V4 AOS plate for the Prodigy builds the rear sight into it.
Do I need an adapter plate to mount a red dot on the Springfield Prodigy?
Yes, for almost every optic. The Springfield Prodigy mounts red dots through a plate system, so you bolt the plate matching your optic's footprint into the slide and then bolt the optic to the plate. Plates are available for the Trijicon RMR / Holosun 507C footprints.
Does the Holosun 507C X2 fit a Springfield Prodigy?
Yes, on a plate. The Holosun 507C X2 is a Trijicon RMR / Holosun 507C footprint optic, so it mounts on the Springfield Prodigy using the C&H Precision V4 AOS Plate (Prodigy to RMR/507C). Install the plate to the slide first, then the optic to the plate.
Does the Trijicon RMR Type 2 fit a Springfield Prodigy?
Yes, on a plate. The Trijicon RMR Type 2 is a Trijicon RMR / Holosun 507C footprint optic, so it mounts on the Springfield Prodigy using the C&H Precision V4 AOS Plate (Prodigy to RMR/507C). Install the plate to the slide first, then the optic to the plate.
Which optic plate comes with a Springfield Prodigy?
Springfield ships the Prodigy with a HEX Dragonfly compatible AOS plate. Running an RMR-pattern dot such as a Trijicon RMR or a Holosun 507C means fitting the AOS plate cut for that footprint instead.
Do Prodigy AOS plates have a rear sight in them?
Yes. Springfield machines AOS plates from billet steel with an integral rear sight, and C&H Precision's Prodigy AOS plate carries one as well. Plan for the sight picture to change when you change plates, because the rear sight leaves with the old plate.
Keep reading
Optic footprints for other Springfield Armory models
- Springfield Hellcat optic footprint
- Springfield Hellcat Pro optic footprint
- Springfield Echelon optic footprint