Talon Grips Granulate (S&W Bodyguard 2.0)

The Bodyguard 2.0 left the factory with a usable but unremarkable grip texture, and on a 9.8-ounce frame that snaps under .380 recoil, the hand wants more. Talon's pre-cut adhesive overlay wraps the grip panels in granulate texture with no permanent stippling, no frame modification, and no change to the pocket-holster fit.

Install takes about ten minutes. Clean the frame with isopropyl alcohol, peel the backing, align the pre-cut panels to the molded frame contours, then press and hold. Full adhesive cure takes 24 hours. The overlay holds up to heat, sweat, and pocket-holster abrasion for years and removes clean when it is time to swap textures or sell the gun.

The granulate texture is the aggressive variant, best for range work and OWB carry where the grip is not pressed against bare skin under a cover garment. Pocket carriers who run the gun directly against thin clothing should choose Talon's rubber or PRO texture instead. This is cut specifically for the Bodyguard 2.0; the original Bodyguard 380 used a different Talon SKU and the two do not interchange.