Consumables

Pre-cut adhesive grip overlay for the Ruger LCP MAX in granulate texture. Adds aggressive purchase to the factory frame without changing dimensions.

The standard large rifle primer, and what most published load data is developed with. Ten trays of 100 covers a long stretch of .308 and .30-06 loading at under six cents a round.

The standard small rifle primer for .223 Remington and small-pocket .308 and 6.5 Creedmoor brass. For a military-pattern semi-automatic, CCI designates its No. 41 rather than this one.

New-production phosphate-steel M27 disintegrating links for 5.56 belt-fed firearms.

The high-volume AR powder. A spherical propellant carrying Hodgdon's Copper Fouling Eraser additive to slow copper buildup, metering superbly through a measure. It is not an Extreme-series powder and is not temperature stable.

The slower Extreme-series extruded powder for mid-size cases behind heavy bullets, and the usual starting point for 6.5 Creedmoor handloads. Grains were shortened for better metering and it is insensitive to temperature.

The default .308 Winchester match powder. The first of Hodgdon's Extreme Extruded propellants, insensitive to hot and cold temperatures, with small extruded grains that meter uniformly.

The value rifle brass. Uniform wall thickness and consistent weight and capacity in a single known lot at roughly 60 percent of Lapua money, produced in smaller lots and pressure-calibration tested for uniform expansion.

The match brass benchmark. Hard-drawn case heads hold primer pockets tight across many reloadings, and annealed necks and shoulders survive repeated sizing, which is what makes the per-case price defensible over a case's life.

Drop-in adapter that helps 12-gauge Mossberg 500/590/590A1/Shockwave/Maverick 88 guns run 1.75-inch Aguila mini shells.

New pistol brass cheap enough to skip sorting range pickup. Starline anneals between each draw for consistent metallurgy and makes its own primer pocket and flash hole tooling, with hand inspections at multiple stages.

12-pack of 3V SF123A/CR123A lithium batteries for compatible weapon lights, handheld lights, and optics.

Pre-cut adhesive grip overlay for Gen5 full-size Glock frames. Fits the Glock 17, 22, 31, 34, 35, 45, and 47. Granulate or rubber texture.

NIOSH-approved reusable half-mask kit with replaceable 2097 P100 filters for oil and non-oil particulates.

NIOSH-approved disposable P100 filtering facepiece with a full faceseal, adjustable straps, and an exhalation valve.

Slim 10,000 mAh USB-C PD power bank for thermal optics and handhelds that support external USB-C power.

Shower wash and shampoo formulated to remove lead and other heavy-metal dust from skin and hair after range use.

Rinse-off hand soap formulated for frequent removal of lead and other heavy-metal dust from skin.

Low-sudsing detergent for lightly soiled range clothing, towels, and washable elastomeric respirator facepieces.

Large pre-wet wipes for cleaning lead and metal dust from washable hard surfaces, benches, floors, and gear exteriors.

Portable pre-moistened towels for lifting lead and other metal dust from hands, arms, face, and body when rinse water is unavailable.

Replacement Delrin magazine rollers for PS90 / P90 magazines that reduce friction and carbon buildup.

17-7 stainless steel replacement spring set for the PS90 upper receiver, includes barrel-support, return, and charging springs plus 15mm wrench.

Compact NIOSH-approved P100 half-mask with replaceable low-profile filters and a 4.65 oz complete weight.

Alcohol-free no-rinse wipes for removing lead and other heavy-metal dust from intact external skin after handling firearms.

Vinyl-backed nylon brass catcher with metal clips for the PS90, holds approximately 50 cases.

No-tools brass deflector for AUG-pattern rifles that redirects ejected casings away from the shooter's face.

Low-profile tactical half-mask family built around a central 99.97% particulate filter for live-fire and weapon-interface use.

Slip-on Decelerator rubber recoil pad that tames the SKS steel buttplate with no gunsmithing, adding about an inch of length of pull.

Drop-in floor plate that adds about 3/4 inch of grip to the Bodyguard 2.0 flush 10-round magazine for a full three-finger hold.

Precision-machined 304 stainless guide rod for SP-01 / full-size CZ guide-rod applications. Uses CGW recoil springs and does not work with the factory flat-wire spring.

Adhesive grip overlay cut specifically for the Glock 42 frame. Granulate (aggressive) or rubber (concealment-friendly) texture; reversible install with no permanent frame modification.

Adhesive grip overlay that adds texture to the factory Glock 43 frame. Available in granulate (aggressive) or rubber (concealment-friendly).

Adhesive grip overlay molded specifically for the PSA Dagger Micro frame. Rubber, granulate, or PRO/Evolution textures; reversible install with no permanent modification.

Pre-cut adhesive grip overlay for the Ruger MAX-9 in granulate texture. Adds aggressive purchase to the factory frame without changing dimensions.

Pre-cut adhesive grip overlay for the S&W Bodyguard 2.0 in granulate texture. Adds aggressive purchase to the factory frame without changing dimensions or holster fit.

24-pack of 1.5V Ultimate Lithium AA cells for weapon lights, red dots, thermal scanners, and electronic ear pro. Lithium chemistry holds voltage in the cold and resists leakage in storage.

24-pack of 1.5V Ultimate Lithium AAA cells for red dots, weapon-light tail caps, rangefinders, and electronic ear pro. Lithium chemistry holds voltage in the cold and resists leakage in storage.

100% cotton cleaning patches for .22-.270 caliber bores. Thick-weave construction absorbs solvent effectively without shedding fibers. Pre-cut square patches for use with jags and slotted tips.

20 precision-cut absorbent pads shaped to wipe carbon out of the AR-15 star chamber and locking lugs after brushing. The step that a bore brush and patch cannot reach.

Reusable foam Bore-Tips in five calibers (.22/.30/.357/.40/.45) on a single 8-32 thread. Washable, lint-free, and patchless. The bore swab that replaces jags and slotted tips for most calibers.

Adhesive grip overlay that adds texture to the Glock 26 frame. Available in granulate (aggressive) or rubber (concealment-friendly).