Talon Grips (PSA Dagger Micro)
Adhesive grip overlay molded specifically for the PSA Dagger Micro frame. Rubber, granulate, or PRO/Evolution textures; reversible install with no permanent modification.
- Price
- $25
- Weight
- 0.5 oz
- Brand
- Talon Grips
- Category
- Consumables
Featured in
Features
- •Pre-cut for the PSA Dagger Micro grip module
- •Rubber, granulate, or PRO/Evolution texture
- •Precision adhesive backing
- •Dagger Micro-specific cut, not interchangeable with Glock 43X/48
Capability Boosts
Recommended For
+12 more
More Glock guides & articles
Guides
Overview
TALON Grips molds a dedicated overlay for the PSA Dagger Micro, and it is not the same SKU as the company's Glock 43X/48 grip. The Micro's grip module has its own texture pattern and contours, so TALON cuts a frame-specific panel set to match it. The factory Dagger Micro texture is functional but mild for a subcompact carry gun, and the overlay adds aggressive purchase without stippling or a new frame.
Installation is straightforward: clean the frame with alcohol, peel the adhesive backing, align the pre-cut panels to the Micro's contours, and press into place. Full cure takes roughly 24 hours. Removal leaves no permanent frame modification.
Rubber and granulate variants run about $24.99; the PRO and Evolution textures run about $29.99. Pick granulate or PRO for range and dry-hand grip, and rubber for concealed carry where a grittier texture can wear through cover garments. All variants preserve factory frame dimensions, so holsters continue to fit.
Key Features
- Molded specifically for the PSA Dagger Micro frame
- Distinct SKU from the Glock 43X/48 cut; the two are not interchangeable
- Rubber, granulate, and PRO/Evolution texture options
- Precision adhesive backing holds through heat and sweat
- Does not alter frame dimensions or holster fit
- Reversible install, no permanent modification
Pros
- +Frame-specific cut for the PSA Dagger Micro, not a generic Glock wrap
- +Adds real texture to a value polymer frame for under $30
- +Preserves holster and frame compatibility
- +Reversible if you change your mind
- +Multiple texture options for range versus carry
Cons
- −Granulate texture can wear through thin cover shirts
- −Alignment requires care during install
- −Not a substitute for frame stippling if you want permanent texture
- −Dedicated Micro SKU sold direct rather than through most retailers
Detailed Specifications
- Material
- Rubber, granulate, or PRO/Evolution texture
- fits
- PSA Dagger Micro only (not Glock 43X/48; different frame cut)
- installation
- Adhesive, 10-minute install, 24-hour cure
- weight
- ~0.5 oz
Similar Products
Compatibility Tags
Build Your Custom Configuration
Add the Talon Grips (PSA Dagger Micro) to your build and see how it enhances your platform.