Key Takeaways
- →Three complete guns: the ADX Race Rifle at $1,899.99 with a 16.5 inch Spitfire barrel, plus the ADX SBR and ADX Pistol at $1,699.99 each with a 10.2 inch Comet barrel.
- →Left-side charging: the support hand runs the bolt, lifts the handle into a steel-reinforced notch to lock it open, and slaps it down to chamber a round.
- →Ruger 10/22 magazines: every ADX feeds from factory BX magazines, and each complete gun ships with one 20-round DoubleKross.
- →Build your own: the ADX Barreled Action starts at $744.99 with the receiver, charging handle, rear cap, and barrel installed.
- →Shipping limits: the complete guns are serialized, FFL-only, and not shipped to 14 states plus Washington DC.
TANDEMKROSS ADX Race Rifle
A 10/22-magazine race rifle with support-hand charging for Steel Challenge and rimfire matches
TANDEMKROSS ADX (Advantage X) receiver on a Manticore X Lower with a 16.5-inch threaded Spitfire barrel and folding Picatinny stock; feeds from Ruger 10/22 magazines. Serialized firearm; ships to an FFL
- +Support-hand charging with a built-in bolt lock and slap release
- +Bolt and charging handle come out the rear without fighting the recoil spring
- +Threaded, M-LOK-cut barrel ready for a rimfire can, light, or bipod
- −Priced well above a factory Ruger 10/22 Carbine with an upgrade budget
- −Launch ADX receiver takes standard fixed barrels only, no Takedown barrels
- −Rear cap design rules out aftermarket bolt buffers
Affiliate links (?)
What the TANDEMKROSS ADX Is
The ADX (short for Advantage X) is TANDEMKROSS's own .22 LR receiver, and the ADX line is the first family of complete guns built around it: a Race Rifle, an SBR, a Pistol, and a barreled action for custom builds. The three complete guns marry the ADX receiver to the Manticore X Lower, TANDEMKROSS's aluminum chassis with the trigger, safety, and magazine release machined into one part, and every ADX receiver takes standard Ruger 10/22 magazines.
TANDEMKROSS first showed the receiver at SHOT Show 2025 as an ambidextrous 10/22-pattern part, then built it into complete firearms that reached the market in September 2026. For a shooter who has already rebuilt a 10/22 with TANDEMKROSS parts, the ADX is the step that replaces the last Ruger component left on the gun, the receiver itself. Our Ruger 10/22 upgrades guide covers the parts-by-parts route to a similar rifle.
Left-Side Charging and the Bolt Lock
The ADX moves the charging handle to the left side of the receiver, where the support hand can run it without the firing hand leaving the grip or the eye leaving the optic. Pull the handle back, lift it into a steel-reinforced notch, and the bolt stays open. Swipe it down out of the notch and the bolt slams home, the same motion an MP5 shooter uses.
On a factory 10/22, locking the bolt back takes two hands: one holds the charging handle while the other pushes the bolt lock lever in front of the trigger guard. On the ADX it is one motion with one hand, which matters most at the end of a Steel Challenge stage when the range officer asks you to show clear. The receiver still accepts right-side 10/22 charging handles, including the factory Ruger handle and the TANDEMKROSS Spartan, for anyone who would rather keep the conventional layout.

Get Rimfire Launches First
New .22 LR rifles, 10/22 parts, and rimfire competition gear in one weekly email.
Rear Cap Takedown and Cleaning
The ADX receiver closes at the back with a removable rear cap held by a self-retaining pin. Pull the pin and the cap, and the recoil spring, charging handle, and bolt slide out of the rear of the receiver. A standard 10/22 makes you compress the recoil spring to get the bolt in or out under tension.
The open rear also lets a solid cleaning rod run down the bore from the chamber end. TANDEMKROSS says the whole gun field strips by removing three pins. One trade-off comes with the design: the rear cap takes the place of an aftermarket bolt buffer, so a Shock Block or similar buffer does not go in an ADX. The receiver carries an integral extended Picatinny rail with a skeletonized channel and a Teflon-impregnated hardcoat black anodize to cut friction from the bolt.
ADX Race Rifle vs SBR vs Pistol
The three complete ADX guns share the receiver, the Manticore X Lower, a 1:16 twist sporting chamber, and 1/2x28 muzzle threads. They differ in barrel length and in what sits on the rear Picatinny interface.
| Spec | ADX Race Rifle | ADX SBR | ADX Pistol |
|---|---|---|---|
| Price | $1,899.99 | $1,699.99 | $1,699.99 |
| Barrel | 16.5 in Spitfire | 10.2 in Comet | 10.2 in Comet |
| Overall length | 33.5 in (25.25 in folded) | 27.25 in (19 in folded) | 18.5 in |
| Weight, unloaded | 55.4 oz | 52.1 oz | 41 oz |
| Rear interface | Folding stock, 12.25 in LOP | Folding stock, 12.25 in LOP | Picatinny for a brace, none included |
| Transfer | FFL | FFL with SOT | FFL |
The Race Rifle is the match gun. Its tensioned Spitfire barrel sits inside an M-LOK-cut aluminum sleeve, and the rifle ships with a folding Picatinny stock that sets inline or at a 12-degree drop, a buffer tube mount for AR stocks, one DoubleKross magazine, and a cable lock. The SBR is the same gun with the 10.2 inch Comet barrel, and it folds to 19 inches with the stock closed. The Pistol drops the stock, leaves the rear Picatinny section open for a brace, and is the lightest ADX at 41 oz.
TANDEMKROSS ADX SBR
A folding ADX with a threaded 10.2 inch barrel that closes to 19 inches
Short-barreled-rifle configuration of the TANDEMKROSS ADX: ADX receiver, Manticore X Lower, 10.2-inch threaded Comet barrel, and folding Picatinny stock. TANDEMKROSS ships it only to an FFL holding SOT status
- +Compact threaded host that folds to 19 inches for a rimfire can
- +Support-hand charging with a built-in bolt lock and slap release
- +M-LOK on the barrel sleeve and forend for a light or laser
- −Short-barreled rifle: ships only to an SOT dealer, and state law decides whether you can own one
- −Launch ADX receiver takes standard fixed barrels only, no Takedown barrels
- −Rear cap design rules out aftermarket bolt buffers
Affiliate links (?)
TANDEMKROSS ADX Pistol
The lightest ADX at 41 oz, with a rear Picatinny section ready for a brace
Pistol configuration of the TANDEMKROSS ADX: ADX receiver, Manticore X Lower with a rear Picatinny section for a brace, and a 10.2-inch threaded Comet barrel. Ships without a stock or brace. Serialized firearm; ships to an FFL
- +Lightest ADX at 41 oz, with an 18.5-inch overall length
- +Threaded 1/2x28 and M-LOK on the barrel sleeve for a can and a light
- +Brace interface ships inline or at a 12-degree drop, plus a buffer tube option
- −No brace included; a brace or buffer tube is a separate purchase
- −Adding a shoulder stock to the 10.2-inch barrel makes it a short-barreled rifle
- −Rear cap design rules out aftermarket bolt buffers
Affiliate links (?)
ADX Barreled Action for Custom Builds
The ADX Barreled Action is the serialized receiver with the left-side charging handle assembly, the rear cap, a barrel retaining V-block, and either the 16.5 inch Spitfire or 10.2 inch Comet barrel already installed, in black or stainless. Prices start at $744.99 for the 10.2 inch stainless configuration and rise with barrel length and a black finish.
No bolt, trigger assembly, or stock comes in the box. TANDEMKROSS points builders at its KrossFire bolt or a factory bolt, a Manticore trigger assembly, and any stock or chassis cut for a .920 bull barrel channel. The 10.2 inch configuration is for a pistol build or an SBR; putting a shoulder stock on it makes a short-barreled rifle under federal law. Our 10/22 chassis and stocks guide covers the bull-channel stocks that fit.
TANDEMKROSS ADX Barreled Action
Starting a custom ADX build around your own bolt, trigger, and stock
Serialized ADX receiver with its left-side charging handle assembly, rear cap, and a 10.2 or 16.5 inch threaded TANDEMKROSS barrel installed.
- +Receiver and threaded barrel arrive assembled, so no barrel fitting or V-block work
- +Left-side charging handle with a built-in bolt lock-back catch
- +Threaded, M-LOK-cut barrel sleeve takes a can, light, or bipod
- −Bolt, trigger assembly, and stock are all separate purchases
- −Stock or chassis must have a .920 bull barrel channel
- −Rear cap design rules out aftermarket bolt buffers
Affiliate links (?)
ADX vs TKX22 Light Rifle
The TKX22 Light Rifle at $1,449.99 is the conventional-layout TANDEMKROSS rifle, and it was the company's first complete gun. It uses the TKX22 receiver, a billet 6061-T6 aluminum receiver with the standard right-side 10/22 charging handle, so it keeps the full 10/22 trigger, stock, and charging handle aftermarket open. It ships with a Manticore LITE trigger adjustable from 2.5 to 5.5 lb, a Magpul MOE X-22 stock with a 13.75 inch length of pull, Eagle Eye fiber optic sights on M-LOK, and the same threaded 16.5 inch Spitfire barrel.
The ADX Race Rifle costs more for the left-side bolt lock, the rear cap, the folding stock, and the Manticore X Lower's AR-grip ergonomics, and it weighs 55.4 oz against 54 oz for the TKX22. A shooter who wants iron sights and a traditional stock should buy the TKX22. A shooter who runs a red dot in timed matches and wants faster reloads should buy the ADX. The TKX22 is also sold as a barreled action from $544.99.

TANDEMKROSS TKX22 Light Rifle
A conventional-layout 10/22-pattern rifle with fiber optic irons and the full 10/22 parts ecosystem
3 lb 6 oz 10/22-pattern rifle on the TANDEMKROSS TKX22 receiver with a Manticore LITE trigger assembly, 16.5-inch threaded Spitfire barrel, and Magpul MOE X-22 stock. Serialized firearm; ships to an FFL
- +3 lb 6 oz unloaded with a threaded barrel and adjustable trigger
- +Fiber optic irons included, plus an extended rail for an optic
- +Conventional 10/22 layout keeps the factory parts and magazine ecosystem
- −Replacement stocks and chassis must have a .920 bull barrel channel
- −Receiver does not accept 10/22 Takedown barrels
- −Costs several times a factory Ruger 10/22 Carbine
Affiliate links (?)
Suppressor and Accessory Fit
Every ADX barrel is threaded 1/2x28, the standard .22 LR muzzle thread, so a rimfire suppressor with a 1/2x28 direct-thread mount screws straight on. Our best .22 suppressors guide ranks the cans worth pairing with it. M-LOK slots on the barrel sleeve and forend take lights, lasers, and hand stops, and the integral receiver rail takes a red dot. For optic picks, see our rimfire scopes guide. To plan the rest of the rifle, load the ADX Race Rifle in the rifle builder and add an optic, light, and can.
Rimfire Suppressors for 1/2x28 Threads
Affiliate links (?)
Who Should Buy an ADX
The ADX Race Rifle is for rimfire competitors who already know a stock 10/22 slows them down: Steel Challenge, NSSF Rimfire Challenge, and similar timed matches reward the support-hand bolt lock and the adjustable trigger. It is also the cleanest way to get a folding, suppressor-ready rimfire without assembling parts yourself, and TANDEMKROSS covers it against mechanical failure for life.
It is not the value pick. A factory Ruger 10/22 plus a trigger, barrel, and stock costs less, keeps the right-side layout, and still runs every magazine the ADX does. Our best .22 LR rifle guide covers the cheaper starting points.
Shipping Restrictions and SBR Rules
Every ADX, including the barreled action, is serialized and ships only to an FFL. TANDEMKROSS does not ship the complete ADX guns to California, Colorado, Connecticut, Delaware, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Oregon, Rhode Island, Vermont, Washington, or Washington DC.
The ADX SBR is a short-barreled rifle under federal law, and TANDEMKROSS ships it only to a dealer holding SOT status. Since October 9, 2026, ATF has not enforced Form 4 approval or NFA registration for SBR transfers, and dealer sales still run a Form 4473 and NICS check. State law did not change: confirm with your dealer that your state allows an SBR and whether it requires federal registration before you order.
















