Badger Ordnance Condition One J-Arm + Micro Sight Mount

This builder entry bundles the two Badger Ordnance parts required to mount an offset red dot on a Condition One Modular Mount: a 35-degree or 45-degree J-Arm and one footprint-specific Condition One Micro Sight Mount. The J-Arm bolts directly to one of the scope mount body's accessory ports and can be installed on either side, fore or aft. It does not clamp to the rifle's Picatinny rail, so it belongs only on a build already using the Condition One scope mount.

Choose the Micro Sight Mount that matches the selected optic: Trijicon RMR, Aimpoint ACRO, Leupold DeltaPoint Pro, or Aimpoint Micro T1/T2. Badger prices the J-Arm at $60 and each direct-mount Micro Sight Mount at $50, so the builder records the complete mounting path as a single $110 selection instead of omitting the required plate.

Badger offers 1.70-inch and 1.93-inch J-Arms at 35 or 45 degrees. The arm weighs 0.55 to 0.62 ounce, while the direct-mount plates weigh roughly 0.6 to 0.9 ounce by footprint. The J-Arm uses 7075-T6 aluminum and the Micro Sight Mount uses 6061-T6 aluminum, both with Type III hard-coat anodizing.