[ < Back to pistol triggers ]
Pistol TriggersValue Tier

Wojtek Weaponry

Smith M&P 2.0 FRT

Non-select-fire forced reset device for the M&P M2.0 pistol, the cheapest in-stock M&P FRT at $150.

No image available

Quick Specs

Price
$150
Weight
N/A
Brand
Wojtek Weaponry
Category
pistol-trigger

Features

  • Forced reset trigger (FRT)
  • Hardened 4140 steel, nitride coated
  • Non-select-fire, one pull per round
  • Fits M&P M2.0 only (9mm/10mm/.40/.45)
  • Light fitting/sanding may be required

Capability Boosts

CQB+2

Recommended For

Home Defense+2
Competition+2
Vehicle Operations+2
Range Training+2
training+2
target shooting+2

+12 more

Compatibility Tags

family: handgunframe: sw-mp

Overview

The Wojtek Weaponry Smith M&P 2.0 FRT is the lowest-priced in-stock forced reset trigger for the M&P M2.0 pistol, listing at $150 against the $200 to $202.50 the other makers charge. It is a hardened 4140 unit with a nitride coating that uses slide motion to mechanically drive the trigger forward to reset after each shot, while still requiring one trigger pull per round. The mechanism is non-select-fire, so there is no semi-auto fallback selector; the FRT behavior is the only behavior.

Fitment covers the M&P 2.0 full-size, compact, and subcompact, across 9mm, 10mm, .40 S&W, and .45 ACP. Wojtek is explicit that the part does not fit the original M&P 1.0 generation, which uses a different fire control geometry. Plan on a little light sanding to seat the part in some guns; otherwise it installs as a drop-in striker-area swap.

Forced reset parts are mechanically and legally more sensitive than ordinary trigger shoes. The 2025 DOJ settlement established that FRTs fire one round per function and are not machine guns, but it did not extend to handguns where the magazine loads into the grip, so an M&P pistol FRT is a legally grayer purchase than a rifle FRT. A number of state and District jurisdictions also ban them under multiburst-device statutes. Confirm current federal and local rules before ordering and test function with the exact ammunition and configuration you plan to run.

Key Features

  • Hardened 4140 steel with nitride coating
  • Forced reset driven by slide cycling, one pull per round
  • Non-select-fire, no semi-auto selector
  • Fits M&P 2.0 full-size, compact, and subcompact
  • Covers 9mm, 10mm, .40 S&W, and .45 ACP M&P 2.0 variants
  • Does not fit the original M&P 1.0
  • Lowest-priced in-stock M&P FRT at $150

Pros

  • +Cheapest in-stock M&P 2.0 FRT at $150
  • +Hardened 4140 with nitride coating
  • +Covers all M&P 2.0 sizes and calibers
  • +Non-select-fire FRT behavior with a single pull per round
  • +In stock and shipping direct from Wojtek Weaponry

Cons

  • Does not fit the original M&P 1.0
  • May require light sanding to fit some guns
  • Less documented fitment detail than the Dogwood or Freedom Finger units
  • Non-select-fire, so there is no semi-auto selector fallback
  • Forced reset parts demand extra attention to current state rules and function testing

Detailed Specifications

type
Forced Reset Trigger (non-select-fire)
Material
Hardened 4140 steel, nitride coated
compatibility
Smith & Wesson M&P M2.0 full-size, compact, and subcompact in 9mm, 10mm, .40 S&W, and .45 ACP; does not fit M&P 1.0
installation
Drop-in striker-area swap; light fitting/sanding may be required
countryOfOrigin
USA

Compatible Platforms

+192 more

Pairs Well With

Top matches

Similar Products

Related Guides & Articles

Build Your Custom Configuration

Add the Smith M&P 2.0 FRT to your build and see how it enhances your platform.

Start Building