FRT Compatible Guns 2026: Every Platform With a Forced Reset Trigger

A forced reset trigger works on any semi-automatic firearm with a reciprocating bolt or carrier and a fire-control pocket the device physically fits. That mechanism is the whole gate. The bolt or carrier travels rearward under recoil, and the FRT harnesses that travel to drive the trigger forward against your finger, forcing the reset at cyclic speed instead of waiting for you to release. A revolver, a pump shotgun, and a lever gun have no reciprocating carrier to tap, so no forced reset trigger can ever work on them.

Within the semi-auto world, availability comes down to whether a maker actually cuts a unit for that host. The AR-15 has a dozen because its fire-control pocket is standardized and the market is huge. Everything else has a handful at most, built by small shops around each platform’s specific geometry. The matrix below maps every gun with a forced reset trigger made for it. For the deeper mechanics, pricing, and the super-safety-versus-full-trigger decision, our forced reset trigger buyer’s guide is the companion hub to this platform map.

The AR-15 is the best gun for an FRT and the platform with the most choices, because its standardized fire-control pocket lets a self-contained cassette drop straight in. The Triggered Company Disruptor ($275, formerly the Partisan Disruptor) is the most proven full trigger, tested past 6,000 rounds, and the Rare Breed FRT-15L3 ($450) is the original design with an ambidextrous selector and full hardware kit. Both need a full-auto-compatible bolt carrier and an H2 buffer minimum, H3 under a 16-inch barrel; our AR-15 FRT tuning guide works through the carrier, buffer, spring, and gas combinations that make one cycle cleanly, and our Daniel Defense Block II FRT host writeup covers a complete rifle that arrives with most of that already correct. If you would rather keep the trigger you already run, the selector path uses a super safety instead: the AS Designs Arc-Fire V2 ($249.99) moves across 10-plus platforms and the Mars Super Safety ($139.99) is the cheapest way in. Our super safety guide covers the selector side in full. An FRT-equipped AR also has a scored class to shoot now: the FAST Auto-Rifle division runs forced reset rifles against registered machine guns, with a heavy barrel or belt-fed upper and a mounted bipod required.

The MFR56 belt-fed upper has its own assisted-reset trigger path. Its longer 17-4 steel toggle is made for the MFR56 action; the standard Disruptor toggle is too short to cycle reliably. Treat it as a host-specific unit, not a generic AR-15 trigger. The belt-fed AR-15 guide covers the matching upper, trigger, feed containers, links, and fitment boundary.

The AR family stretches past 5.56. A 9mm AR runs a forced reset trigger only on a tuned blowback build, detailed in our AR9 FRT build guide. The AR-10 has no .308-rated trigger of its own; Rare Breed lists the platform as unsupported and The Triggered Company lists it as coming soon. Some builders run an AR-15 FRT off-label in an LR-308 lower with an M16-profile .308 carrier, an at-your-own-risk build no maker supports or warranties, covered honestly in the AR-10 FRT build guide. And a dedicated .22LR upper turns an AR into a cheap-to-feed forced reset trainer with a trip kit, spelled out in the AR22 FRT build guide. The PSA JAKL, a side-charging piston AR, takes the Arc-Fire V2 selector plus a JAKL-15 slip trip kit; see our PSA JAKL upgrades guide. The SIG MCX, MPX, and Spear use AR-style fire control but no bare AR cassette drops in, because the carrier has no reset trip surface; they run either an Arc-Fire selector on an AS Designs slip trip kit or a Frankenstein TSB that supplies the surface an FRT trigger needs, laid out in our SIG MCX forced reset trigger guide. Stage any of these hosts in our rifle builder to plan the BCG, buffer, and spring stack before you order.

AR-15 Forced Reset Triggers and Selectors

Triggers & Fire Control • $275

The Triggered Company Partisan Disruptor FRT

• 3.75-4.1lb pull
• Forced reset

$275.00 Catalog

View at OpticsPlanet

Triggers & Fire Control • $450

Rare Breed Triggers FRT-15L3

• 4-4.5 lb semi / 5.5-6 lb FRT pull
• Forced reset

$450.00 Catalog

Buy Direct from Rare Breed

Safety Selectors • $249.99

AS Designs Arc-Fire V2 Ambi Kit (0-90-180)

• 0/90/180 throw
• Ambidextrous

$249.99 Catalog

View at OpticsPlanet

Safety Selectors • $139.99

Mars Trigger Position AR FRT Super Safety

• 3-position selector
• 4140 Alloy Steel

$139.99 Catalog

View at OpticsPlanet

Safety Selectors • $209.99

Atrius Development Ambidextrous Forced Reset Selector

• 90-degree throw
• Ambidextrous

$209.99 Catalog

View at OpticsPlanet

Triggers & Fire Control • $345.8

The Triggered Company Assisted Reset Trigger for MFR56

• MFR56-specific extended toggle
• 3.75-4.1 lb pull

$345.80 Catalog

View at OpticsPlanet

Affiliate links (?)

Scroll

The AK and the SKS both take forced reset triggers built around their own fire-control geometry, not an adapted AR unit. On the AK the pick is the MaRs Spring-Loaded AK FRT V2, which drops into stamped AKM, Draco pistol, and pattern receivers; our AK forced reset triggers guide covers fitment across the variants. The Norinco SKS runs the Texas Trigger USA Norinco SKS FRT, the one purpose-built option for that rifle, detailed in our SKS forced reset trigger guide. Both are rifle-style hosts where the magazine feeds forward of the trigger-hand grip, so they sit on the settled federal side of the forced reset line.

AK and SKS Forced Reset Triggers

Triggers & Fire Control • $199.95

MaRs Trigger Spring-Loaded AK FRT V2

• Forced reset trigger (FRT)
• Spring-loaded V2 design

$199.95 Catalog

View at OpticsPlanet

Triggers & Fire Control • $195

Texas Trigger USA Norinco SKS FRT

• Forced reset trigger, one round per trigger pull
• Plug-and-play install, no permanent modification

$195.00 Catalog

Buy Direct from Texas Trigger USA

Affiliate links (?)

Pistol-caliber subguns are a rich FRT field once you get past the AR. The HK MP5 leads it with the Rare Breed FRT-RD3 ($620) and the Mars MP5 complete lower ($599.95), both covered in our MP5 forced reset triggers guide. The KRISS Vector runs a dedicated Super V reset-assist unit, the Duality Arms RATL-R ($250) or the Continental Customs C.A.R.T. V4 ($94.99), not an AR FRT; see our KRISS Vector FRT guide. The classic MAC-10 and MAC-11 take fitted parts like the 3DP Tactical Solutions unit ($150), the A.R.T. 2-Position for Cobray and VMAC9 hosts ($264.99, receiver cut required), and the A.R.T. 3-Position ($264.99, MPA only), covered in our MAC-10 and MAC-11 FRT guide.

MP5, KRISS Vector, and MAC Forced Reset Triggers

Triggers & Fire Control • $620

Rare Breed FRT-RD3 (AMBI)

• Two-stage forced reset
• 3-position (Safe/Semi/FRT)

$620.00 Catalog

Buy Direct from Rare Breed

Triggers & Fire Control • $599.95

Mars Trigger MP5 Complete Lower System (Super Safety)

• Complete drop-in MP5 lower
• 3-position selector (Safe/Semi/FRT)

$599.95 Catalog

View at OpticsPlanet

Triggers & Fire Control • $250

Duality Arms KRISS Vector RATL-R

• 4130 steel body
• Three functional positions via included selector cam

$250.00 Catalog

Buy Direct from Duality Arms

Triggers & Fire Control • $94.99

Continental Customs KRISS Vector C.A.R.T. V4

• 304 stainless steel, laser cut and deburred
• Three positions: Safe, Semi, Brrrt

$94.99 Catalog

Buy Direct from Continental Customs

Triggers & Fire Control • $150

3DP Tactical Solutions MAC-10/MAC-11 FRT (316 Stainless)

• 316 stainless steel
• Fits MAC-10/MAC-11, Cobray, and MPA Defender hosts

$150.00 Catalog

Buy Direct from 3DP Tac Sol

Triggers & Fire Control • $264.99

A.R.T. 3-Position MPA Defender Active Reset Trigger System

• Hardened steel reset lever and 3-position selector
• Position 1 safe, position 2 traditional semi, position 3 A.R.T.

$264.99 Catalog

Buy Direct from A.R.T.

Affiliate links (?)

Scroll

Two more subguns round out this field. The FN PS90, the 5.7x28 bullpup carbine, runs the Dorin XPRT90 ($450) or the Duality Arms RATL-R ($250), detailed in our PS90 FRT guide. The Grand Power Stribog needs an AR-FCG lower conversion before a Partisan Disruptor will run, a machining project rather than a drop in, walked through in our Stribog FRT build guide. The Beretta Cx4 Storm has exactly one option, the Brello Solutions Cx4 Storm FRT ($139.99), which rides a notch you cut into the bolt; see our Cx4 Storm FRT guide. The CZ Scorpion is the notable gap: no forced reset trigger ships for it yet, and our CZ Scorpion FRT status page tracks the announced-but-unshipped Rare Breed FRT-SC3.

PS90, Stribog, and Cx4 Storm Forced Reset Picks

Triggers & Fire Control • $450

Dorin XPRT90 Forced-Reset Trigger

• 17-4 stainless hammer and sear, nitrided
• 3-position aluminum selector

$450.00 Catalog

Buy Direct from FN Specialties

Triggers & Fire Control • $250

Duality Arms PS90 RATL-R

• 7075 CNC aluminum primary assembly
• 3-position carbon-fiber-polymer selector

$250.00 Catalog

Buy Direct from Duality Arms

Lower Receivers • $330

Lingle Industries GEN 2 Stribog Scorpion Lower

• Billet 7075 aluminum construction
• Accepts CZ Scorpion EVO magazines (Magpul PMAG 35 EV9); not AR-15 mags

$330.00 Catalog

Buy Direct from Lingle Industries

Triggers & Fire Control • $139.99

Brello Solutions Beretta Cx4 Storm Forced Reset Trigger

• Kit: 2 triggers, pre-modified carbon steel sear, 4140 steel lifting cam
• Bolt notch cutting template and magazine catch cover included

$139.99 Catalog

View Product

Affiliate links (?)

Rimfire is where forced reset shooting gets cheap. The Ruger 10/22 and PC Carbine both take Mars kits, the Mars 10/22 FRT and the Mars PC9 FRT, so a .22LR plinker or a 9mm carbine can run the same forced reset feel at a fraction of 5.56 cost per round; our Ruger forced reset triggers guide covers both hosts. The Taurus TX22, the .22LR pistol, runs the MaRs Pulse22 ($25), the cheapest forced reset device on this entire page, covered in our TX22 FRT guide. On the AR side of rimfire, the factory Tippmann M4-22 ELITE FRT ships as a turn-key .22LR rifle with the FRT-15L3 pre-fitted, no build required.

The rimfire G36 has a reset kit too, and its scope is narrow enough to state up front: the Duality Arms HK G36 .22LR Mamba ($50) is cut for the .22LR G36 clone and nothing else. It is an assisted-reset kit rather than a full fire control, running a two-position layout of SAFE and ASSISTED RESET, and the Mamba configuration deletes the traditional semi-auto selector position rather than adding a third one. The kit is a 3D-printed Hyper PLA-CF reset module plus a reduced-weight trigger spring, so it is a printed part at a printed-part price. Duality specifies the .22LR platform and only the .22LR platform, so do not carry the fitment across to a 5.56 G36 or an HK SL8; the centerfire guns take a different fire control entirely and none of this kit crosses over.

Rimfire and PC Carbine Forced Reset Kits

Triggers & Fire Control • $289.95

Mars Trigger Ruger 10/22 Adjustable FRT

• Forced reset trigger (FRT)
• 4140 chromoly alloy steel with stainless pins

$289.95 Catalog

View at OpticsPlanet

Triggers & Fire Control • $289.99

Mars Trigger PC9 FRT

• Forced reset trigger (FRT)
• 4140 chromoly alloy steel

$289.99 Catalog

View at OpticsPlanet

Pistol Triggers • $25

MaRs Trigger Taurus Pulse TX22 FRT

• Forced reset trigger (FRT)
• Replaces factory disconnector

$25.00 Catalog

View at OpticsPlanet

Triggers & Fire Control • $50

Duality Arms HK G36 .22LR Mamba Trigger

• Two-position operation: SAFE to ASSISTED RESET
• Removes the traditional semi-auto selector position

$50.00 Catalog

Buy Direct from Duality Arms

Affiliate links (?)

Handguns can take forced reset triggers, and several do, but treat them as flat-range novelties rather than carry or duty setups. The Glock runs the Texas Trigger USA Glock FRT ($95), with a Gen 5 needing a Gen 4 slide release; the fitment is generation-sensitive, so our Glock FRT guide is the one to read before buying. The Smith & Wesson M&P 2.0 has three options, the Wojtek ($150), Dogwood ($200), and Freedom Finger ($202.50), compared in our M&P forced reset triggers guide. The Canik TP9 and METE take the Texas Trigger USA Canik FRT, in our Canik FRT guide. The SIG P320 has one option, the Texas Trigger USA P320 Reaper, and its host list is narrower than the platform’s modularity suggests: the maker names the Full Size, Carry, Compact, M17, M18, and Flux Raider, and addresses no X-Series, XTen, XCompact, or AXG gun. Our SIG P320 FRT guide covers the fitment list and the recoil-spring setup the shorter slides need. The 1911 and 2011 use a hammer-strut swap instead of a trigger cassette, with the Texas Trigger USA 1911/2011 ($60) and Redacted TRX1911 ($89) leading, covered in our 1911 FRT guide. The Walther PDP and PPQ now have an active-reset lever of their own, a fitted part rather than a drop-in, covered in our Walther PDP FRT guide.

Pistol Forced Reset Triggers

Pistol Triggers • $95

Texas Trigger USA Glock FRT

• Billet aluminum raised radiused-edge FRT
• One round per trigger pull, forced reset

$95.00 Catalog

Buy Direct from Texas Trigger USA

Pistol Triggers • $150

Smith M&P 2.0 FRT

• Forced reset trigger (FRT)
• Hardened 4140 steel, nitride coated

$150.00 Catalog

Buy Direct from Wojtek Weaponry

Pistol Triggers • $200

Forced Reset Device M&P 2.0 (Non-Select)

• Forced reset device (FRT)
• 4140 steel construction

$200.00 Catalog

Buy Direct from Dogwood Armory

Pistol Triggers • $202.5

Freedom Finger M&P 2.0 FRT (4140 Steel)

• Forced reset trigger (FRT)
• 4140 steel, black nitrided

$202.50 Catalog

Shop at California Gun Shop

Pistol Triggers • $125

Texas Trigger USA Canik FRT

• CNC-machined billet aluminum body
• Cerakote finish (black or red)

$125.00 Catalog

Buy Direct from Texas Trigger USA

Pistol Triggers • $60

Texas Trigger USA 1911/2011 FRT

• Stainless steel forced-reset hammer strut
• Four calibrated strut sizes (S/M/L/XL) included

$60.00 Catalog

Buy Direct from Texas Trigger USA

Pistol Triggers • $89

Redacted Industries TRX1911 FRT

• Stainless steel forced-reset hammer strut
• Four calibrated sizes (S/M/L/XL) included

$89.00 Catalog

Buy Direct from Redacted Industries

Affiliate links (?)

Scroll

The legal footing under these pistol kits is thinner than the rifle side. The 2025 DOJ settlement that resolved the Rare Breed litigation treated the one-round-per-function mechanism as a semi-automatic trigger on rifle-style long guns, where the magazine feeds forward of the trigger-hand grip. It did not cleanly extend to grip-fed handguns, and under the settlement Rare Breed agreed not to build forced reset triggers for any pistol. Other makers ship Glock, M&P, Canik, and TX22 kits now, but their status is less settled, so confirm current federal and state law before ordering a handgun FRT.

You no longer have to build a forced reset gun from parts. A short but growing list of firearms now ships from the factory with the FRT pre-installed, so you buy one serialized product and skip the trip kit, buffer tuning, and fitment guesswork. The Tippmann M4-22 ELITE FRT is the clearest example, a turn-key .22LR rifle with a Rare Breed FRT-15L3 fitted at the factory. Our factory FRT guns roundup tracks every gun that ships forced-reset-ready out of the box.

Some of the most-searched hosts simply have no forced reset trigger made for them, and the reasons split into two kinds. The first is mechanical: revolvers, pump shotguns, and lever guns have no reciprocating bolt or carrier to drive a reset, so a forced reset trigger is physically impossible on them, full stop. No maker can engineer around that.

The second is a market gap on guns that could take one but do not have a shipping option. The AR-10 has no .308-rated FRT today; makers list the platform as unsupported, and the off-label AR-15-unit workaround carries no manufacturer support. AS Designs has an AR10/GEN-12 unit in sampling and testing targeted at the end of November 2026, covered in the pipeline section below, but nothing has shipped. The CZ Scorpion has none shipping despite an announced Rare Breed FRT-SC3. The Springfield Hellion, a bullpup, has no forced reset trigger made for its rearward fire-control linkage. The Glock 44 in .22LR is excluded by every Glock FRT kit on the market, and the Taurus RPC, a newer pistol, has no maker cutting a unit for it. If your gun is on this list, the honest answer is to pick a different host rather than force a fit that does not exist.

The CMMG Dissent is the closest of these gaps to closing. AS Designs has two Dissent slip trip kits listed, and both say coming soon rather than sold: one covering the .223, .308, .350 Legend, .338 ARC, 7.62x39, 300 BLK, 6.5 Creedmoor, 6.5 Grendel, 6mm ARC, 8.6 BLK, .45, and 5.7x28 guns, and a separate 9mm kit, because the combined kit explicitly does not fit the 9mm Dissent. Each kit is a 4140 steel bolt weight, a 4140 slip trip, a DLC-coated M2 tool steel lever in an ARC or Super Safety version, and a TPU buffer. It is an addition to a Super Safety or ARC-Fire kit, not a replacement for one, so budget for both. AS Designs recommends anti-walk pins, specifically not anti-rotation pins, in the lower.

Watch the date on this one. The AS Designs production-status page lists a middle-of-October 2026 drop for all four Dissent groups with testing complete, while the Dissent product pages themselves say the shipping ETA is late November 2026. Those can both be true if the sale opens in October and units leave in November, but the gap between them is six weeks, and nothing on either page is orderable today. Treat the product-page date as the one that governs when a Dissent actually shoots.

The IWI Tavor X95 belongs in that second group, and it is the row most often misread. No maker sells a forced reset trigger for the X95 as of September 2026; the only reset-type work on the platform is a hobbyist project the FRTINFO tracker lists as in development, which is not something you can order. What you can buy is the Duality Arms X95 Snake Eyes ($25), a Dual-Tap system that fires one round on the trigger squeeze and a second on the release. That is pull-and-release behavior, which puts it in the binary class, not the forced reset class, and the two do not share a legal footprint. The Snake Eyes falls under binary-trigger state laws, a different list from the FRT statutes, so a state that allows FRTs does not automatically allow this, and Duality sells it only for use where pull-and-release triggers are permitted. It is a 3D-printed carbon-fiber PLA part, and it does nothing about the X95’s heavy factory pull; the Geissele Super Sabra pack is the part that fixes that.

IWI Tavor X95 Pull-and-Release Option

Triggers & Fire Control • $25

Duality Arms IWI X95 Snake Eyes

• Dual-phase firing: one round on pull, one on release
• Binary-class pull-and-release device, not a forced reset trigger

$25.00 Catalog

Buy Direct from Duality Arms

Affiliate links (?)

At the federal level, eligible forced reset triggers covered by the May 2025 DOJ settlement are not being treated as machine guns, so they are not NFA items: no tax stamp, no Form 4, and no ATF wait. That resolved the litigation over Rare Breed FRTs and put rifle-style hosts like the AR-15, AK, MP5, and PS90 on settled federal ground. Handgun FRTs are grayer, because the settlement had Rare Breed agree not to build forced reset triggers for pistols, which leaves the Glock, M&P, Canik, and TX22 kits on less-settled footing than the rifle devices.

The bigger catch is that state law varies, and a federal green light does not override a state ban. Sixteen jurisdictions restrict, ban, or cloud forced reset triggers under bump-stock or rate-of-fire statutes: California, Colorado, Connecticut, Delaware, Hawaii, Illinois, Maryland, Massachusetts, Minnesota, Nevada, New Jersey, New York, Oregon, Rhode Island, and Washington D.C., plus Florida, where the bump-fire-stock statute is untested against FRTs and makers decline shipments. This roster moves, so verify current state and local law before buying or installing any FRT. Our forced reset trigger buyer’s guide tracks the federal picture and the state-by-state roster in more detail.