EP Armory FN PS90 FRT-G2
Value-priced two-part forced-reset kit with a 3-position selector for the FN PS90.
- Price
- $80
- Brand
- EP Armory
- Category
- Triggers
Featured in
Features
- •Two-part forced-reset kit
- •3-position safety selector
- •Solid-strand carbon-fiber composite parts
- •Drop-in PS90 installation, no host modification
- •Do not dry fire without a snap cap
Capability Boosts
Recommended For
+12 more
More bullpup guides & articles
Guides
Overview
The EP Armory FN PS90 FRT-G2 is a two-part, drop-in forced-reset kit for the PS90. It pairs a three-position safety selector with a disconnect reset bar, and both parts use solid-strand, vacuum-cured carbon-fiber composite. The gun's own cycle drives the trigger forward into reset after each shot, and the system still fires one round per trigger function. It is by a wide margin the cheapest way onto a three-position reset selector on this platform, well under the Duality Arms PS90 RATL-R and a fraction of the Dorin XPRT90.
EP Armory instructs buyers to compare the host's hammer against the fire-control-group compatibility photos it publishes, and states that the newest PS90 fire control groups need the Gen 1 type P90/PS90 hammer before the kit can work. That check belongs before the order, not after it.
The material is the trade. Composite parts take the forced-reset load that the XPRT90 carries in nitrided 17-4 stainless, the kit must not be dry fired without a snap cap in place, and EP Armory states the fire control group and the FRT must stay lubricated or the part can break. EP Armory backs it with a lifetime warranty. FRT legality is state-specific and can change, so verify current federal, state, and local law before ordering.
Key Features
- Two-part kit with a 3-position safety selector and disconnect reset bar
- Carrier-driven mechanical reset with one round fired per trigger function
- Solid-strand carbon-fiber vacuum-cured construction
- Drop-in installation with no host modification
- Lifetime warranty
Pros
- +By far the cheapest route to a three-position PS90 selector
- +Drop-in installation needs no host modification
- +Includes the 3-position selector and disconnect reset bar
- +Lifetime warranty
Cons
- −Carbon-fiber composite parts instead of the machined metal of the pricier kits
- −Dry-fire practice requires a snap cap
- −The newest PS90 fire control groups need a Gen 1 type hammer before the kit works
- −The fire control group and FRT require attentive lubrication or the part can break
Detailed Specifications
- kit
- Two-part forced-reset kit with safety selector and disconnect reset bar
- Material
- Solid-strand carbon-fiber vacuum-cured composite
- selector
- 3-position safety selector
- install
- Drop-in, no host modification
- hostRequirement
- Compare the hammer against the maker's published compatibility photos; newest PS90 fire control groups need a Gen 1 type P90/PS90 hammer
- operatingLimit
- Do not dry fire without a snap cap; keep the fire control group and FRT lubricated
- warranty
- Lifetime
- legalStatus
- FRT legality is state-specific and can change; verify before ordering
- sku
- PS90-FRT-G2
- manufacturer
- EP Armory
Similar Products
Compatible Platforms
Compatibility Tags
Build Your Custom Configuration
Add the EP Armory FN PS90 FRT-G2 to your build and see how it enhances your platform.