Precision Armament TiTrex 300Ti

The TiTrex 300Ti is Precision Armament's .30-caliber suppressor for bolt-action and semi-auto rifles from 5.56 and 300 BLK through 7.62. The 3D-printed Grade 5 titanium core uses the company's NURBS baffle geometry, and the whole can is 5.9 inches long, 1.65 inches in diameter and 7.2 ounces, or 6.2 inches and 9.2 ounces with the mount and front cap. Precision Armament rates it for centerfire cartridges up to .300 RUM with no barrel-length restriction. Pew Science has tested it, and Precision Armament quotes the lab calling it one of the most optimized performance examples for its length.

The serial number lives on the XBand, a 17-4 stainless containment ring permanently retained to the core. Because that ring never changes, Precision Armament can swap the printed core for a new one, after damage or when a newer design ships, without cutting or welding and without new NFA paperwork; its manual quotes a typical two-business-day turnaround for a core exchange. Every TiTrex ships with a titanium 5/8x24 OPEN SOURCE direct-thread mount, a titanium front cap, the K-Brake suppressor brake and two wrenches, and the HUB-compatible rear accepts any industry-standard HUB mount for other threads or a QD system.

The titanium core carries limits on automatic fire: semi-auto only on .308 barrels under 14.5 inches and 5.56 barrels under 10.3 inches, light or limited full-auto above those. For sustained fire or a short-barreled host, the 300SD Inconel version carries the heavy/SOCOM rating at the cost of 4.2 more ounces.