The Triggered Company Assisted Reset Trigger MOD 2 (B&T SPC9/GHM9/GHM45)

The MOD 2 is the second version of The Triggered Company's drop-in assisted reset trigger for the B&T SPC9, GHM9, and GHM45, sold exclusively through Cloak Industries. Like the original pack, it is a modified Disruptor with a B&T-specific trigger toggle and a housing cut to fit the B&T lower, installed with no machining, fitting, or gunsmithing.

The change is fitment. The original pack will not run in GHM Gen 1 high-shelf uppers, and some Gen 2 guns left the factory with Gen 1 uppers, which made shelf height the first question every buyer had to answer. Cloak lists the MOD 2 for Gen 1 and Gen 2 guns and sells it in three versions: SPC/GHM low shelf, GHM high shelf, and a Lingle lower version that ships with compatible trigger pins and a selector.

The rest of the specification carries over: a three-position selector with Safe, Semi-Automatic, and Enhanced Semi-Automatic, a listed 3.75 to 4.1 lb pull, and 17-4 stainless and 4140 chromoly on the wear surfaces. The MOD 2's trigger toggle is nitride-coated 17-4 rather than the original's gold PVD.