Accessories

Slip trip kit that lets an Arc-Fire or Super Safety forced reset selector run on the SIG MCX with a standard AR or Geissele MCX trigger group.

Aluminum ring that clamps to the TX22 slide so the slide can be racked with one finger, with no screws or frame modification.

Reversible bolt-on claw that uses belt pressure to rotate the pistol grip inward on compatible Rounded IWB holsters.

Drop-in adapter that lets a locking-bar forced reset trigger run in the standard-caliber SIG MCX and MPX family. Not compatible with a Super Safety.

Three-round cam limiter that adds a deliberate extended release interval to a Hoffman-pattern AR-15 Super Safety setup.

Asymmetrical foam holster wedge offered in three sizes and left- or right-hand orientations for targeted body-side pressure.

Long locking garment clip with wide slot spacing for adaptable holster mounting.

Tuckable clip that supports belt or beltless carry and adapts to common belt widths.

Horizontal two-hole clip with adjustable cant for compatible holster mounting patterns.

Heavy slip trip kit that lets an Arc-Fire V2 forced reset selector run on the SIG MCX Spear in .308 and .277 FURY.

Slip trip kit that lets an Arc-Fire or Super Safety forced reset selector run on the SIG MPX with a standard mil-spec AR fire control group.

Slip trip kit that adapts an Arc-Fire or Super Safety forced reset selector to the PSA JAKL-15 piston carrier.

Locking spring-steel holster clip for beltless carry with a dual mounting bracket.

The original beavertail grip safety upgrade for the 1911, with memory grooves that index your hand consistently

Adhesive-backed foam wedge that tips the upper portion of a rigid IWB holster inward and cushions the body-side shell.

Drop-in adapter that lets a locking-bar forced reset trigger run in the heavy-caliber SIG MCX Spear in .308 and .277 FURY. Not compatible with a Super Safety.

A 16 lb replacement slide spring for full-size Beretta 90-series pistols and the GG92 Baccano.

Flared Rifle Combat Magwell in receiver-specific fits (milspec forged, LMT MARS, Aero, ADM, Radian, more); funnels reloads when you cannot see the magwell.

Chrome-silicon recoil spring options for full-size, Compact, and Centurion Beretta 92 pistols.

Universal slip-on NAVCOM recoil pad that cuts felt recoil up to 50 percent on fixed-stock shotguns.

Electronic rifle-mounted level with side Picatinny or direct center Picatinny mounting for precision shooting.

Metal slip trip that Nexus specifies for running a Rare Breed FRT-15L3 or DTT drop-in in a converted Kuna. Requires the Nexus Kuna lower.

Metal slip trip that lets a Super-Safety or Atrius Super-Selektor run in a Springfield Kuna. Requires the Nexus Kuna lower.

Required 12-gauge adapter nut that joins an MXT extension tube to a Benelli M1/M2/SBE magazine.

Standard BCL-12 clamp for supporting a 12-gauge MXT extension alongside the barrel, with accessory holes on both halves.

Enlarged bolt-release paddle for the FN SCAR that lets you drop the bolt with a small trigger-finger movement.

Two-piece clamshell magwell for the FN SCAR that funnels reloads with no permanent modification.

Factory replacement captive recoil spring assembly for the 9mm P226-X, and the wear part a high-round-count competition gun eventually needs.

Compact narrow-profile locking clip for holsters with a short vertical mounting area.

Long narrow-profile locking clip with dual slots for broader mounting-hole spacing and ride adjustment.

Spacer-and-hardware kit for mounting separately purchased DCC Mod 4 clips to a Blackhawk Stache IWB holster.

Scalloped forward thumb rest for the Mark IV 22/45 frame that adds a contact point ahead of the grip for recoil control.

Oversized 1911-style safety ledge that mounts on the factory manual safety of a Mark IV 22/45 to give the thumb a shelf.

Aircraft grade aluminum pull ring that replaces the Mark series bolt ears so the bolt can be charged with either hand.

Low-profile receiver-mounted optic plate for Ruger Mark series pistols that bolts a red dot straight to the gun with no rail or clamp.

Tuckable locking clip with T-slot mounting for cant and hole-width adjustment.

Closed-cell foam wedge in four size and taper combinations, supplied with the hook-and-loop needed to mount it on a rigid holster.

Wilson Combat's billet steel ambidextrous thumb safety, the tightest-fitting ambi safety on the 1911 aftermarket

The single 16 lb recoil spring weight Griffith Guns specifies for a standard-fire-control Beretta 92 running the Baccano.

An 18 lb full-size recoil spring, the heavier weight Griffith Guns suggests for a 92S running the Baccano.

A Beretta 92/96 calibration pack with 15, 16, 18, and 20 lb recoil springs.

Locking steel belt loop for heavy-duty attachment to 1.5-inch belts.

Matched .308 carbine recoil system with receiver extension, short buffer, spring, end plate, and castle nut.

M5-specific receiver controls, pins, and basic safety for completing the Aero lower while retaining separate trigger and grip choices.

Aluminum pull ring for the Buck Mark bolt, offered in Style A and Style B to match the two supported factory bolt profiles.

Aluminum pull ring that clamps to the SW22 Victory bolt ears, giving a full-finger purchase for charging the pistol instead of a pinch grip.

20 in hotshoe-to-I/O cable that sends X4-LRF range data directly to an installed X4-FCS.

8 in hotshoe-to-I/O cable that sends X4-LRF range data directly to an installed X4-FCS.

Three-button wired remote for the X4-FCS or X4-LRF with haptic feedback with the x4-lrf and attaches with supplied adhesive-backed hook-and-loop.

Three-button wired remote for the X4-FCS or X4-LRF with haptic feedback with the x4-lrf and attaches with supplied adhesive-backed hook-and-loop.

Three-button wired remote for the X4-FCS or X4-LRF with tactile button response and clamps to a stanag 4694 or mil-std-1913 picatinny rail.