BCM BFH 11.5" Carbine 5.56 Barrel
BCM's cold hammer forged 11.5" Government-profile carbine-gas barrel. The proven CQB length for SBR and pistol 5.56 builds.
- Price
- $363
- Brand
- Bravo Company Manufacturing
- Category
- Barrels
Affiliate links (?)
Featured in
Features
- •11.5" length, Government profile
- •Carbine gas system
- •5.56 NATO chamber, 1:7 twist
- •CMV CHF, chrome-lined bore and chamber
- •1/2x28 muzzle threads
- •HP and MPI tested
More AR-15 guides & articles
Guides
Overview
The BCM BFH 11.5" Carbine is the short-barrel 5.56 that built the modern SBR and pistol-AR template. Cold hammer forged from MIL-B-11595E CMV steel, chrome lined in bore and chamber, and HP proof tested with MPI inspection, it carries the same construction as BCM's longer duty barrels in a CQB length.
Carbine gas at 11.5" is correctly tuned rather than over-gassed: the gas port and dwell time are matched to the length, so the rifle runs reliably across common ammunition without the harsh impulse of an undersized system. The .750" gas journal takes a standard low-profile block and the muzzle is 1/2x28 for any 5.56 device or suppressor mount.
This is an NFA-length barrel. It belongs on a short-barreled rifle or a pistol lower. Builders cross-shopping the Daniel Defense 10.3" Government CHF should weigh length and intended use: the 11.5" gives a bit more velocity and dwell, the 10.3" is the clone-correct CQBR length. BCM's button-rifled Standard 11.5" carbine is the lower-cost alternative.
Key Features
- Cold hammer forged CMV bore (MIL-B-11595E)
- Carbine gas system correctly tuned for 11.5"
- Chrome-lined bore and chamber for round count and suppressed use
- 1:7 twist stabilizes 55 to 77 grain 5.56 NATO
- .750" gas journal accepts standard low-profile gas blocks
- Manganese phosphate exterior finish
- 1/2x28 threaded muzzle, M4 feed ramps
- HP proof tested and MPI inspected
Pros
- +Proven CQB length with BCM's duty-grade CHF construction
- +Carbine gas is correctly specced for 11.5", not over-gassed
- +Chrome lining supports high round counts and suppressed fire
- +.750" journal and 1/2x28 muzzle accept standard parts
Cons
- −Sub-16" barrel: assemble it as an SBR or a pistol, not a standard rifle
- −Carbine gas generates more recoil and heat than mid-length
- −Government profile is heavier than lightweight contours
- −BFH line is frequently out of stock; Standard variant is button-rifled
Detailed Specifications
- Length
- 11.5"
- profile
- Government
- chamber
- 5.56 NATO
- twist
- 1:7
- Material
- CMV (MIL-B-11595E)
- construction
- Cold Hammer Forged
- Finish
- Chrome-lined bore, manganese phosphate exterior
- gasSystem
- Carbine
- gasJournal
- .750"
- muzzleThreads
- 1/2x28
- feedRamps
- M4
- testing
- HP proof, MPI
- madeIn
- USA
Pairs Well With
Top matches
Sig Sauer
Sig Sauer SIG516 G3 11.5" Pistol
3 shared compatibility tags
Sig Sauer
Sig Sauer SIG516 G3 11.5" SBR
3 shared compatibility tags
Primary Weapons Systems
PWS MK111 MOD 2-M Rifle .223 Wylde (SBR)
3 shared compatibility tags
Shadow Systems
Shadow Systems E526 11.5" Pistol
3 shared compatibility tags
Daniel Defense
Daniel Defense DD4 RIII S
3 shared compatibility tags
Daniel Defense
Daniel Defense MK18 RIII SBR (10.3")
3 shared compatibility tags
Similar Products
Compatible Platforms
Compatibility Tags
Build Your Custom Configuration
Add the BCM BFH 11.5" Carbine 5.56 Barrel to your build and see how it enhances your platform.