
C&H Direct Mount Optic for SIG Sauer Pro-Cut
C&H direct-mount pistol optic for SIG Sauer optics-ready Pro-Cut pistols including P320, P226, P229, and P220.

The P320 Spectre Comp takes optics on a dedicated slide cut that answers to two footprint families at once. SIG describes the Custom Works slide, with its falling serrations and optic plate cover, as compatible with the ROMEO1PRO, PRO, or RMR, which is a rare thing to get from a factory with no plate in the stack. ROMEO1PRO and PRO pattern optics, which share screw spacing with the Leupold DeltaPoint Pro, bolt to the slide, and so do Trijicon RMR and Holosun 507C pattern dots. Aimpoint ACRO, Holosun 509T, Holosun EPS, and the micro Shield RMSc and Holosun K footprints stay outside what the factory cut accepts.
Spectre is a Custom Works trim applied across several pistols, and the optic answer here belongs to the Spectre Comp's own redesigned slide rather than to the Spectre name. The compensator is part of that slide package: it houses the front sight and attaches with two taper screws, so front sight height and dot height get decided together on this gun. The XRAY3 rear night sight stays in its dovetail when the optic goes on, the opposite of the X-Series and Legion slides, where the rear sight rides the cover plate and leaves with it.
These optics carry the DeltaPoint Pro / RMR footprint the slide is cut for. Screws, recoil bosses, and pocket all line up, so they seat on the slide with no plate.

C&H direct-mount pistol optic for SIG Sauer optics-ready Pro-Cut pistols including P320, P226, P229, and P220.

RMR-footprint enclosed-emitter carry and duty optic with a larger sight window

Slim RMR-footprint dot with a large 8 MOA reticle and Cyelee's STIG-RS lens treatment

RMR carry optic with 3 MOA dot and 45 MOA circle-dot choices in a shorter housing.

Open-emitter RMR-footprint red dot with a wide window, side-loading CR1632, and a switchable 3 MOA + 32 MOA MRS reticle.

RMR-footprint open-emitter competition optic with a wide window and multi-reticle options

Large-window RMR-footprint competition optic with 2 MOA dot and 38 MOA circle options

Fully enclosed RMR-footprint pistol dot with a gas-filled housing and side-loading CR1620

Large-window RMR competition optic with a 6 MOA red or green dot and 1 MOA adjustments.

Large-window RMR optic with 3 MOA dot and 45 MOA circle-dot reticle options.

Multi-reticle micro red dot with solar failsafe and shake awake

Third-gen multi-reticle pistol dot with photodiode sensor, Solar Failsafe, and RMR footprint

Titanium-housed open-emitter micro red dot on the RMR footprint with a larger window than the 507C.

American-made competition optic with excellent glass clarity

Original Osight reflex sight on the RMR footprint with a single 3 MOA dot, magnetic charging cover, and aluminum housing.

Enclosed-emitter red dot built on the DeltaPoint Pro footprint, with a 0.91 x 0.71 inch window, switchable 2 MOA dot and 32 MOA circle, and a side-loading CR1620 tray.

Open-emitter RMR-footprint red dot with a wide window, OAL housing, and a magnetic charging cover for rechargeable operation.

Enclosed-emitter duty red dot on the RMR footprint with the AMRS five-reticle system and a field-swappable side-loading CR1632 battery.

Duty-rated enclosed-emitter red dot on the RMR footprint with a 2/6+32 MOA multi-reticle system and a magnetic charging cover.

An RMR-footprint open dot with three selectable reticles, a 50,000 hour CR1632, IPX67 sealing, and a Picatinny adapter in the box at $329.99.

Full-size SIG optic for P320 X-series and similar platforms

Budget closed-emitter pistol red dot that ships with both RMR and Glock MOS plates

Titanium RMR-footprint pistol dot with a large aspheric window and selectable reticles

Closed-emitter DPP-footprint pistol red dot with solar assist and a multi-reticle.

All-purpose DPP-footprint pistol red dot with top-load CR2032 and Glock MOS plate.

Large-window pistol red dot on the DeltaPoint Pro footprint with top-load battery

Solar-powered enclosed pistol optic with direct SIG P320 fit and DPP footprint compatibility
Trijicon's enclosed-emitter pistol red dot on the RMR footprint with top-load battery
The original pistol red dot that defined the category
Green-LED 2.5 MOA version of the SRO announced May 2026: same wide circular window, RMR footprint, and top-loading CR2032, in black or coyote brown.
The P320 Spectre Comp takes optics on a dedicated slide cut that answers to two footprint families at once. SIG describes the Custom Works slide, with its falling serrations and optic plate cover, as compatible with the ROMEO1PRO, PRO, or RMR, which is a rare thing to get from a factory with no plate in the stack. ROMEO1PRO and PRO pattern optics, which share screw spacing with the Leupold DeltaPoint Pro, bolt to the slide, and so do Trijicon RMR and Holosun 507C pattern dots. Aimpoint ACRO, Holosun 509T, Holosun EPS, and the micro Shield RMSc and Holosun K footprints stay outside what the factory cut accepts.
No. The P320 Spectre Comp slide is cut for the DeltaPoint Pro / RMR footprint and DeltaPoint Pro / RMR optics bolt straight to the slide.
Yes. The Holosun 507C X2 uses the DeltaPoint Pro / RMR footprint that the P320 Spectre Comp slide is cut for, so it bolts straight to the slide with no adapter plate.
Yes. The Trijicon RMR Type 2 uses the DeltaPoint Pro / RMR footprint that the P320 Spectre Comp slide is cut for, so it bolts straight to the slide with no adapter plate.
Yes. The Leupold DeltaPoint Pro uses the DeltaPoint Pro / RMR footprint that the P320 Spectre Comp slide is cut for, so it bolts straight to the slide with no adapter plate.
Yes. SIG describes the Spectre Comp slide as compatible with the ROMEO1PRO, PRO, or RMR, so an RMR-pattern optic bolts into the slide's own threaded holes with no adapter in between. The same holes serve the Holosun 507C family and other RMR-footprint dots. Installation is a matter of pulling the optic plate cover, seating the optic, and torquing the correct screws.
No. The Spectre Comp keeps its XRAY3 rear night sight in the slide dovetail, and only the optic plate cover comes off. That groups it with the P320 Pro Series and AXG slides and separates it from the X-Series and Legion slides, where the rear sight is part of the cover plate and leaves the pistol with it.