Home/Articles/News
News

Flux Glock Redux: Fitment, Suppressors and FRT Test

Flux Glock Redux price, November 6 release, and official fitment: full-size-grip Gen 4 and Gen 5 Glocks (no G19), a 3-minute pistol swap, suppressor fit, red dot parallax, and FRT reliability from range testing.

Author
Aditya Bawankule
Read
4 min
Platform
Pistol
Flux Glock Redux: Fitment, Suppressors and FRT Test header image

Key Takeaways

  • →Price and release: $349.99 for the Redux Kit, on sale November 6, 2026; a second version drops the front magazine carrier.
  • →Fitment: Full-size-grip Gen 4 and Gen 5 Glocks, from the G17 and G19X to the G45 and G47. The standard Glock 19 is not listed.
  • →Three-minute swap: One front screw and one rear pin move the chassis between Glocks.
  • →Suppressors: Thin cans fit with the front shroud on; remove it for wider cans like the SHIV and Omega 9K.
  • →Zero in the chassis: The dot sits close to your eye, so parallax shows. The Aimpoint ACRO held accuracy best.
  • →FRT builds need tuning: Springs, lube, mags, and heat all affected reliability with an ART trigger.

Flux Glock Redux: The Latest Update

The Flux Redux is a brace chassis for full-size-grip Gen 4 and Gen 5 Glocks, priced at $349.99 and on sale at Flux from November 6, 2026. Flux announced it on November 2 with an official compatibility list that leaves out the standard Glock 19. Dirty Civilian's October 24, 2026 video runs a couple thousand rounds of 9mm through the Redux on a Glock 34 and Glock 45, with three suppressors, a Radian Ramjet, and a forced reset trigger. Dirty Civilian's verdict: a stock Glock dropped into the Redux runs well, while a suppressed FRT build takes tuning.

The Redux brings Flux back to Glocks. Flux's first product, around 2019, was a spring-loaded brace that pinned to the back of a Glock; the company then moved to the SIG P320, whose serialized fire control unit made a full chassis practical, and built the Raider around it. The Redux keeps the Glock's own controls and simplicity rather than adding the Raider's feature list.

Flux Redux Price and Versions

The Flux Redux Brace Package costs $349.99. It is Flux part number 161-00043, listed for Gen 4 and Gen 5 Glocks. Flux also makes a second version, part number 161-00045, without the front magazine carrier, for shooters who do not want a spare magazine riding ahead of the trigger guard. Flux opens direct sales on November 6, 2026, and also sells an SBR Stock Kit for the Redux for owners who build the pistol as a short-barreled rifle.

For comparison, the CAA MCK for Glock costs $295 and clamps around the pistol with an extended Picatinny rail on top. The Redux keeps the red dot on the slide and adds the collapsing rear brace and spare-magazine holder. Our Glock chassis guide ranks the full field.

Flux Redux for Glock
Flux Defense

Flux Redux for Glock

Gen 4 and Gen 5 Glock owners who want a brace chassis that keeps the slide-mounted dot

$349.99
STREET

Flux Defense brace chassis for full-size-grip Gen 4 and Gen 5 Glocks (G17, G19X, G45, G34 and others), with a forward spare-magazine carrier

Pros
  • +Keeps the Glock's own controls and slide-mounted optic
  • +Fast swap between compatible Glocks
  • +Spare magazine rides on the gun
Cons
  • −Brace rails cover the slide stop, so slide lock is awkward
  • −Factory magazine release is harder to reach; smaller hands may want an extended release
  • −No top optic mount; the slide dot sits close to the eye, which exposes parallax and makes passive night vision shooting harder
Caliber: 9mm (host Glock determines caliber)Barrel: Uses Glock barrelWeight: Not published by Flux

Watch the Flux Redux Hands-On

Video: Dirty Civilian, October 24, 2026. The Redux segment starts at 7:33; features at 9:51, manual of arms at 16:11, and the FRT test at 25:39.

Which Glocks Fit the Flux Redux

The Redux fits Gen 4 and Gen 5 Glocks with the full-size grip. Flux lists the G17, G17L, G19X, G22, G31, G34, G35, G45 and G47, and the November 2 launch release also names the G46. The standard Glock 19 is not on either list; the G19X and G45, which pair a compact-length slide with the full-size grip, are. Dirty Civilian ran a Gen 5 Glock 34 and a Gen 5 Glock 45. Swapping pistols takes about three minutes: remove one screw at the front assembly and the pin at the rear, drop in the new Glock, and reinstall both.

The chassis attaches to the Glock's backstrap with a push pin. Because the beavertail sits behind the grip, the factory magazine release is harder to reach, and the testers recommend an extended magazine release for shooters with smaller hands. Gen 3 and Gen 6 Glocks are not listed. Our Glock Gen 5 vs Gen 6 guide covers why Gen 6 frames are a separate fitment question.

Flux Redux vs Raider: What Changed

The Redux is simpler than the P320 Raider. The brace opens the same way, by pushing down on the lever, but several Raider features are gone:

  • No dual magazine drop. The spare magazine in the front holder and the magazine in the Glock release separately.
  • No QD sling sockets. There is a rear spot to attach a sling, but not the Raider's built-in QD points.
  • No top optic shroud. The red dot stays on the slide. Without a raised mount pushing the dot forward, the Redux is harder to shoot passive under night vision.
  • Removable aluminum front shroud. Ambidextrous thumb ledges give the support hand a shelf away from the muzzle, which matters on a pistol shorter than the G34, and Flux built it to clear ported and compensated pistols.

The Redux keeps the original Flux two-piece layout: the rear brace and the front Flashmag spare-magazine holder work together or separately, which Flux says helps buyers in states that restrict integrated systems. The polymer parts are injection molded from the same composite Flux uses on the Raider X, and the spare magazine now drops with Flux's patented release button.

Flux Redux on a Glock with the front shroud removed, a suppressor, an Aimpoint ACRO on the slide, and a spare magazine in the front Flashmag
Flux's launch photo: front shroud off for a suppressor, the dot on the Glock slide, and a spare magazine in the Flashmag. (Credit: Flux Defense)

What the Glock Redux Close-Ups Show

Nick Chen's October 23 Instagram video gave the first close look at the system. The Redux keeps the Glock's pistol frame and slide at the center of the setup. The rear brace assembly sits around the back of the frame, with rails extending behind the grip. The red dot stays on the slide, so it moves with the slide during cycling rather than sitting on a separate bridge above it.

Side view of the Flux Glock Redux showing the suppressed Glock, slide-mounted red dot, front magazine holder, and rear brace rails
At 0:56, the side view shows the Glock frame inside the rear brace assembly and the spare-magazine holder ahead of the trigger guard. (Credit: Nick Chen (@solscud007), Instagram)

Ahead of the trigger guard, the front assembly holds a spare magazine and provides a place for the support hand. That puts the second hand farther forward than a normal two-handed pistol grip. The layout follows the original Glock Flux Brace concept, rather than enclosing the slide inside a larger shell. Our Glock chassis guide compares the other conversion designs and their host requirements.

Follow New Pistol and Chassis Releases

Get our latest firearm news, product coverage, and buying guides in your inbox.

Free targets, drill cards, and weekly reviews by email.

Flux Redux Manual of Arms

The brace rails run over the slide stop, so locking the slide back is awkward, especially with the brace collapsed. On an empty-gun reload, the testers settled on this sequence: thumb down to the Glock's magazine release, then the release for the spare magazine in the front holder, then back up to the slide stop. Shooters with shorter thumbs had to roll the gun to reach it. Firing and dropping the slide were unaffected. Expect to practice a new manual of arms, as with any chassis.

Flux Redux Suppressor Fit

Suppressor fit depends on the front shroud. With the shroud installed, only a thin can clears it; the JK Armament can in the video ran on the G34 for a couple hundred rounds. With the shroud removed, wider cans fit: the Stealth Additive Works SHIV (1.3 inches in diameter, 2.5 ounces) was the testers' favorite and ran hearing safe, and a SilencerCo Omega 9K also cycled. A Radian Ramjet ran on the G45 with the shroud back on for thumb protection.

For quieter shooting, they used PSA 158-grain subsonic loads. Nick Chen's earlier footage also showed gas at the shooter, since the brace puts the back of the slide near your face. Our pistol suppressor setup guide covers boosters, sights, and mounts, and the best 9mm suppressor guide compares cans.

Two suppressed Glock Flux setups at the range, one resting on the table and the other held by the shooter
At 1:25, two suppressed setups appear together. The tabled pistol gives another view of the front magazine holder and rear brace. (Credit: Nick Chen (@solscud007), Instagram)

Red Dot Parallax: Zero It in the Chassis

Zero your red dot in the chassis, with the cheek weld you will actually use. The testers' slide had been zeroed as a pistol, and once in the Redux it grouped tightly but off point of aim. The cause is parallax: at arm's length the dot leaves the window before parallax matters, but with the optic near your eye you can see the dot while misaligned. An inconsistent cheek weld starts costing hits past 15 to 20 yards.

After roughly 500 rounds of troubleshooting, the Aimpoint ACRO was the most consistent optic on small targets at distance. Optic weight is another variable on a fast-cycling setup. Our pistol red dot zeroing guide walks through the process.

Pistol Red Dots to Compare

Vortex Defender-XL Micro Red Dot product image
Pistol Optics • $399.99

Vortex Defender-XL Micro Red Dot

  • 2/5/8 MOA red dot
  • DeltaPoint Pro footprint
$399.99
Shop at PSA
Vortex Defender-ST Micro Red Dot product image
Pistol Optics • $249.49

Vortex Defender-ST Micro Red Dot

  • 3 or 6 MOA red dot
  • DeltaPoint Pro footprint
$269.49
View at OpticsPlanet
Osight SE DPP Enclosed Red Dot product image
Pistol Optics • $239.99

Osight SE DPP Enclosed Red Dot

  • 2 MOA dot + 32 MOA circle MRS
  • Enclosed emitter, DeltaPoint Pro footprint
$239.99 Catalog
Shop at Osight
Osight SE FDE Enclosed (2 MOA + 32 MOA Red MRS) product image
Pistol Optics • $199.99

Osight SE FDE Enclosed (2 MOA + 32 MOA Red MRS)

  • Cerakote FDE finish
  • 2 MOA dot + 32 MOA circle, red
$199.99 Catalog
Shop at Osight

Affiliate links (?)

Scroll

Forced Reset Trigger in the Flux Redux

An FRT runs in the Redux, but making it reliable took tuning. Dirty Civilian built an Agency Arms Gen 5 Glock 34 with an ART trigger and the JK Armament can. The Agency slide is cut for a Gen 3-style recoil spring, and the lighter of Agency's two spring weights ran with 115-grain ammo. The build still double-fed, failed to extract, and slowed down as it heated up; the testers noted the setup wants to run wet, and regular lube helped. Worn magazines fed too slowly for the FRT, so fresh ones fixed that.

The ART trigger left no room for the Gen 5 slide stop. A Gen 4 slide stop in the Gen 5 frame fit and restored slide lock. Their list of variables for an FRT build: slide cuts and weight, optic weight, recoil spring, the FRT itself, suppressor, comp, lube, magazine springs, and overall gun health. That trigger has no semi-auto setting, and holding the trigger down for a single shot still produced about three rounds, so they treat the build as a range gun rather than a defensive one. See our Glock FRT guide for generation fitment and check the FRT state legality map before buying.

Is the Flux Redux Worth It?

For a standard Glock dropped in and shot, yes. That was Dirty Civilian's conclusion after a full range day. A suppressed Redux without a reset trigger was “pretty darn viable.” Adding an FRT, comps, and different cans multiplies the variables. The testers were also clear that the chassis does not make you a better shooter. It changes ergonomics, and it takes practice. Our Glock chassis guide compares the alternatives.

If you want a full-length top rail for a rail-mounted red dot, magnifier or light instead of the slide-mounted dot, the CAA MCK is the main alternative. It clamps around a Gen 3 through Gen 5 Glock 17, 19, 19X, 22, 23, 25, 31, 32 or 45 for $295.

CAA MCK for Glock
CAA

CAA MCK for Glock

Glock owners who want a top rail for optics and lights instead of a slide-mounted dot

$295
STREET

Affordable Glock conversion kit with carbine ergonomics

Pros
  • +Most affordable conversion option
  • +No modification to Glock required
  • +Quick installation and removal
Cons
  • −Polymer construction less premium
  • −Adds significant bulk
  • −Factory sights are basic
Caliber: 9mm (Glock determines caliber)Barrel: Uses Glock barrelWeight: Official current page does not publish weight

The Earlier Dealer Preview

A September dealer-video screenshot had already shown the rear brace and front magazine holder at a Flux display. The range footage shows that layout in action. Flux's October 19 teaser came two weeks before the November 2 launch announcement.

Dealer-video screenshot showing a Glock pistol with a rear brace, slide-mounted red dot, and forward spare-magazine holder
Preview reposted from a Cindy's Hot Shots video. The screenshot shows the Glock-mounted system at a Flux display. (Credit: Cindy's Hot Shots, via r/tacticalgear)

The RXM Is a Different Project

Flux lists the Ruger RXM version alongside the Glock version, rather than using RXM as another name for the Glock kit. Ruger's RXM has a removable stainless steel Fire Control Insert inside an interchangeable Magpul grip. The firing components can move into a different grip body, which gives a chassis maker a different starting point from the Glock-mounted brace shown in the previews.

That distinction matters if you are choosing a host. An existing Glock owner is looking for hardware that fits the pistol frame. An RXM owner has a modular grip system. Our Ruger RXM review covers the pistol, while the RXM accessories guide explains its upgrade paths. The comparison tool lets you compare host pistols separately from their chassis options.

Frequently Asked Questions

▶What is the Flux Glock Redux?
The Flux Redux is Flux Defense's new brace chassis for Glock pistols. It attaches to the Glock's backstrap with a push pin, adds a collapsing rear brace and a forward spare-magazine holder, and keeps the red dot on the slide. It succeeds the original Flux Brace, the spring-loaded Glock brace that was Flux's first product around 2019, before the company moved to the SIG P320 and built the Raider.
▶Is there a Glock flux?
Yes. The Flux Redux is Flux Defense's chassis for Gen 4 and Gen 5 Glock pistols, announced November 2, 2026 and on sale at fluxdefense.com from November 6, 2026. The Redux Kit sells for $349.99 and fits full-size-grip Glocks such as the G17, G19X, G34 and G45.
▶How much does the Flux Glock Redux cost?
$349.99 for the Redux Kit (Flux part number 161-00043), on sale at fluxdefense.com from November 6, 2026. Flux also offers a second version, part number 161-00045, that comes without the front magazine carrier. Both are listed for Gen 4 and Gen 5 Glocks.
▶When is the Flux Redux release date?
November 6, 2026. Flux announced the Redux for Glock on November 2, 2026, and Flux opens sales of the $349.99 kit on November 6, 2026, with a waitlist before then.
▶Which Glocks fit the Flux Redux?
Gen 4 and Gen 5 Glocks with the full-size grip. Flux lists the G17, G17L, G19X, G22, G31, G34, G35, G45 and G47, and its November 2, 2026 launch release also names the G46. Gen 3 and Gen 6 Glocks are not listed.
▶Does the Flux Redux fit a Glock 19?
Flux does not list it. The standard Glock 19 is not on Flux's Redux compatibility list, which names only full-size-grip Gen 4 and Gen 5 Glocks. The Glock 19X and Glock 45, which pair a Glock 19-length slide with a full-size grip, are listed.
▶How long does it take to swap a Glock into the Flux Redux?
About three minutes. Remove one screw at the front assembly and one pin at the rear, drop in the new Glock, and reinstall both.
▶Does the Flux Redux work with a suppressor?
Yes. With the aluminum front shroud installed, it needs a thin can such as the JK Armament unit used in testing. With the shroud removed, wider cans like the Stealth Additive Works SHIV and SilencerCo Omega 9K fit and ran.
▶Which red dot works best in the Flux Redux?
In Dirty Civilian's testing, the Aimpoint ACRO held accuracy best at distance. The brace puts the slide-mounted dot close to your eye, which exposes parallax, so zero the optic in the chassis with your normal cheek weld rather than at arm's length.
▶Can you run a forced reset trigger in the Flux Redux?
Yes, but reliability depended on many variables in testing: recoil spring weight, lube, magazine spring condition, suppressor, comp, ammo, and heat. With the ART trigger in a Gen 5 Glock 34, a Gen 4 slide stop was needed to restore slide lock.
▶What is the difference between the Glock Flux and RXM projects?
The Redux attaches to a Glock pistol frame. The Ruger RXM has a removable Fire Control Insert inside an interchangeable grip, giving a chassis maker a different starting point. Flux lists Glock and RXM as separate projects.
Share
Pass the dispatch