Glock 49 MOS optic footprint: what red dots fit

Glock 49 MOS

The Glock 49 MOS uses Glock's MOS plate system, so there is no single footprint to match. Its Glock 17-length Gen5 slide is milled with the MOS pocket: install the plate that matches your red dot, then bolt the dot to the plate. The factory set covers the Trijicon RMR and Holosun 507C family on Plate 02 and the Leupold DeltaPoint Pro on Plate 04, and machined aftermarket plates take it further to Aimpoint ACRO, Holosun 509T, Holosun EPS, and Shield RMSc / Holosun K.

The Glock 49 is the Gen5 crossover in the other direction: a Glock 17-length slide over a Glock 19-size grip. Optic fitment tracks the slide, and the slide carries the standard Gen5 MOS pocket, so every Glock MOS plate in the list below fits.

Optics that fit
50
No plate needed
0
Plate required
50
Footprints accepted
Trijicon RMR / Holosun 507CShield RMSc / Holosun KLeupold DeltaPoint ProAimpoint ACROHolosun 509THolosun EPS
Open the interactive checker on the Glock 49 MOS
Disclosure: This page contains affiliate links. We may earn a commission on purchases at no cost to you. Read the affiliate disclosure

Trijicon RMR / Holosun 507C(15)

Trijicon RMR / Holosun 507C optics mount on the Glock 49 MOS through a plate in that footprint. Bolt the plate into the slide first, then the optic to the plate.

Shield RMSc / Holosun K(18)

Shield RMSc / Holosun K optics mount on the Glock 49 MOS through a plate in that footprint. Bolt the plate into the slide first, then the optic to the plate.

Leupold DeltaPoint Pro(7)

Leupold DeltaPoint Pro optics mount on the Glock 49 MOS through a plate in that footprint. Bolt the plate into the slide first, then the optic to the plate.

Aimpoint ACRO(5)

Aimpoint ACRO optics mount on the Glock 49 MOS through a plate in that footprint. Bolt the plate into the slide first, then the optic to the plate.

Holosun 509T(2)

Holosun 509T optics mount on the Glock 49 MOS through a plate in that footprint. Bolt the plate into the slide first, then the optic to the plate.

Holosun EPS(3)

Holosun EPS optics mount on the Glock 49 MOS through a plate in that footprint. Bolt the plate into the slide first, then the optic to the plate.

Glock 49 MOS optic fitment FAQ

What optic footprint does the Glock 49 MOS use?

The Glock 49 MOS uses Glock's MOS plate system, so there is no single footprint to match. Its Glock 17-length Gen5 slide is milled with the MOS pocket: install the plate that matches your red dot, then bolt the dot to the plate. The factory set covers the Trijicon RMR and Holosun 507C family on Plate 02 and the Leupold DeltaPoint Pro on Plate 04, and machined aftermarket plates take it further to Aimpoint ACRO, Holosun 509T, Holosun EPS, and Shield RMSc / Holosun K.

Do I need an adapter plate to mount a red dot on the Glock 49 MOS?

Yes, for almost every optic. The Glock 49 MOS mounts red dots through a plate system, so you bolt the plate matching your optic's footprint into the slide and then bolt the optic to the plate. Plates are available for the Trijicon RMR / Holosun 507C, Shield RMSc / Holosun K, Leupold DeltaPoint Pro, Aimpoint ACRO, Holosun 509T and Holosun EPS footprints.

Does the Holosun 507C X2 fit a Glock 49 MOS?

Yes, on a plate. The Holosun 507C X2 is a Trijicon RMR / Holosun 507C footprint optic, so it mounts on the Glock 49 MOS using a matching plate such as the Glock OEM MOS Adapter Plate 02 RMR and C&H Precision Glock MOS to RMR Steel Adapter Plate. Install the plate to the slide first, then the optic to the plate.

Does the Trijicon RMR Type 2 fit a Glock 49 MOS?

Yes, on a plate. The Trijicon RMR Type 2 is a Trijicon RMR / Holosun 507C footprint optic, so it mounts on the Glock 49 MOS using a matching plate such as the Glock OEM MOS Adapter Plate 02 RMR and C&H Precision Glock MOS to RMR Steel Adapter Plate. Install the plate to the slide first, then the optic to the plate.

Does the Holosun 507K X2 fit a Glock 49 MOS?

Yes, on a plate. The Holosun 507K X2 is a Shield RMSc / Holosun K footprint optic, so it mounts on the Glock 49 MOS using a matching plate such as the C&H Precision Glock MOS RMSc / Holosun K Steel Plate and Calculated Kinetics Glock MOS DOGTAG RMSc / K Plate. Install the plate to the slide first, then the optic to the plate.

Does the Holosun EPS Carry fit a Glock 49 MOS?

Yes, on a plate. The Holosun EPS Carry mounts on the Glock 49 MOS using a matching plate such as the C&H Precision Glock MOS RMSc / Holosun K Steel Plate and Calculated Kinetics Glock MOS DOGTAG EPS Plate. Install the plate to the slide first, then the optic to the plate.

Does the Glock 49 use the same plates as the Glock 47?

Yes. Both are Gen5 MOS slides with the same optic pocket, so they share the full Glock MOS plate catalog along with the 17, 19, 45, and 34 MOS.

Keep reading

Optic footprints for other Glock models