Prime Day deals are on now. See our roundup
[ < Back to triggers ]
TriggersPremium

The Triggered Company

The Triggered Company LAT FRT

Match-grade assisted reset FRT, a refinement of the Disruptor with a cleaner 3-3.5 lb pull and flat bow

No image available

Quick Specs

Price
$325
Weight
3.2 oz
Brand
The Triggered Company
Category
trigger

Features

  • 3-3.5 lb pull
  • Forced reset (ARSE)
  • 17-4 stainless / 4140 chromoly
  • Flat trigger bow
  • 3-position safety
  • 6,000+ round tested

Compatibility Tags

family: ar-patterntrigger: ar-fcg

Overview

The Triggered Company LAT is a service rifle match grade, 3-position AR-15 assisted reset trigger. A refinement of the Disruptor, the LAT delivers a greatly improved pull in standard semi-automatic mode while preserving the enhanced semi-automatic function in the third position.

The key difference between the LAT and the Disruptor is how the selector controls the trigger's internal reset system. The Disruptor is a simplification of the original TacCon 3MR, combining the reset lever and main trigger piece into one while adding an out-of-battery safety. Easier to manufacture, cheaper for the customer, and includes that key safety device. The LAT spares no expense and retains the reset lever in all its glory, an improved and better looking 3MR, while also adding the same out-of-battery safety device that traces its roots back to Browning's 1900 patent (US659507).

With the reset lever in standard semi-automatic mode, the LAT's assisted reset function and out-of-battery safety function are completely disabled by the selector. This allows the LAT to deliver a crisp, single-stage trigger feel during the break, with no assisted reset function active in standard semi-automatic operation.

In the third ARSE (Assisted Reset Semi Enhanced) position, the LAT activates the assisted reset function and out-of-battery safety function to achieve the same enhanced semi-automatic performance as the Disruptor. Pull it tightly and get a measurably reduced-weight assisted reset. Pull it gingerly and let it run.

The LAT uses 17-4 stainless steel and 4140 chromoly on all wear surfaces. It is tested beyond 6,000 rounds under a course of fire derived from the USMC M27 IAR evaluation criteria. Buffer requirements match the Disruptor: H2 minimum with H3 recommended for 16" and shorter barrels, standard rifle buffer for 20" A2 stocks. Anti-walk pins are required and included; CLAP pins are preferred. The LAT is compatible with most AR-15 lowers and uses mil-spec pin size. Named after Larry Alan Thorne, a Hall of Fame badass who fought commies for three governments and was KIA in Vietnam while serving in US Special Forces.

Key Features

  • Service Rifle Match-grade forced reset trigger, refinement of the Disruptor
  • 3-3.5 lb pull weight, significantly cleaner than the Disruptor's 3.75-4.1 lb gritty break
  • Variable ARSE mode: tight pull for reduced-weight forced reset, gentle pull to let it run
  • 17-4 stainless steel and 4140 chromoly on all wear surfaces
  • Flat trigger bow (vs Disruptor's curved bow)
  • 3-position safety: Safe, Semi, Enhanced Semi (forced reset)
  • Tested beyond 6,000 rounds under USMC M27 IAR evaluation criteria
  • Drop-in cassette with anti-walk pins included, mil-spec pin size

Pros

  • +Much cleaner semi-auto pull than the Disruptor (3-3.5 lb vs 3.75-4.1 lb gritty)
  • +Variable forced reset rate via ARSE mode
  • +17-4 stainless construction is an upgrade over the Disruptor's tool steel
  • +Flat trigger bow preferred by match shooters
  • +Same proven 6,000+ round durability testing as the Disruptor

Cons

  • $50 premium over the Disruptor ($324.99 vs $275)
  • Requires H2/H3 buffer for carbine-length guns (additional cost)
  • State and local FRT restrictions still apply
  • No long-term track record yet (new release)

Detailed Specifications

triggerType
Forced reset trigger (FRT) - ARSE (Assisted Reset Semi Enhanced)
pullWeight
3 - 3.5 lbs
positions
3-position (Safe/Semi/Enhanced Semi)
Material
17-4 stainless steel / 4140 chromoly
triggerShape
Flat
pinSize
Mil-spec
installation
Drop-in, no gunsmithing required
compatibility
AR-15 platforms (most lowers)
bufferRequirement
H2 minimum (H3 recommended) for carbine <16", rifle buffer for 20" A2
pinsIncluded
Anti-walk pins included (CLAP pins preferred)
durability
Tested beyond 6,000 rounds, USMC M27 IAR evaluation criteria
restrictedStates
Verify current federal, state, and local law before purchase; do not rely on a static state list
madeIn
USA

Compatible Platforms

+84 more

Similar Products

Related Guides & Articles

Build Your Custom Configuration

Add the The Triggered Company LAT FRT to your build and see how it enhances your platform.

Start Building