Chest Rigs

Hard-kydex magazine retention in a chest rig format. Three rifle + two pistol/radio pouches on a Tegris hinge that flexes with the ribcage. The right pick when prone work and vehicle drills loosen elastic rigs.

Low-profile rifle-magazine shingle for MOLLE-equipped load carriage.

An $88 open-MOLLE rig with a three-row by eight-column PALS face, a hook-fastener back panel for plate carrier integration, and a sewn-in carry handle.

The chest rig that doubles as a single-plate carrier. Front pocket accepts a ballistic plate; integrated pistol and 6x6 side plate pockets; full Crye AVS ecosystem behind it.

Placard for carrying carbine magazines on compatible chest rigs and plate carriers.

D3CRX layout sized for 7.62x51. Four .308/SR25/M14/FAL pouches with shock cord that drops down to take 5.56 when you swap platforms, plus a front zippered GP with admin sleeve.

12.6 oz of MIL-SPEC 500D nylon carries four rifle mags plus four utility pouches for pistol mags, lights, or multitools. A notably light 4-mag premium rig and the spiritual successor to the original D3CR.

T.REX placard using KYWI inserts for open-top 5.56 magazine retention.

T.REX placard using KYWI inserts for open-top 7.62 magazine retention.

A 13.6 oz laser-cut rig with a 12-column by 5-row MOLLE face and fully detachable shoulder and waist straps. Open MOLLE rather than a proprietary placard footprint, so any pouch you own mounts to it.

The SOF-influenced classic that defined the minimalist chest rig category. Carries four 5.56 mags, two pistol mags, two small radios, and includes a map pocket without breaking the low-profile silhouette.

A widely copied modular chest rig footprint. The Mk4 chassis scales from a $76 standalone rig to a plate-carrier placard without rebuying pouches; soft-loop interior accepts swappable mag, sub-gun, and admin inserts.

The fixed-front MCR chassis, $30 under the split-front version. Same B52 and Squadron laminate with 8-layer Tegris reinforcement at the mounting points.

10.6 oz laminate plate split into two halves with First Spear Tubes fasteners. The split layout makes the rig easier to don, doff, and open for prone work than a fixed-front chassis.

Blank MOLLE placard for configuring pouches on compatible carriers and rigs.

Four-cell flap chest rig for protected rifle-magazine carriage.

ULTRAcomp laser-cut panel with four Ten-Speed M4 pouches. Ten-Speed elastic lays flat when empty, MOLLEminus slots add accessory mounting, and the zip-front chassis opens for prone work.

Low-profile elastic chest rig for rifle magazines and compact support gear.

$78.84 for a Berry-compliant chest rig with First Spear 6/12 laminate construction. Reversible front panel (rig on one side, low-vis admin on the other) plus access to the broader 6/12 pouch ecosystem.

Modular chest rig built around the removable TRAAP front panel.

Standalone modular front panel for the T.REX TRAAP load-carriage system.

Polish-made Cordura 500D mini rig that ships complete with H-harness, mag pouches, GP pocket, and a MOLLE panel for $120-130. Carries 2 rifle mags plus 4 small pouches; the budget entry point into a real chest rig.

Three-cell flap placard for covered rifle-magazine retention.

Crye's laminate MOLLE front flap. Three rows of laser-cut AirLite webbing on the same detachable flap interface as the AVS flaps, so it fits the AirLite SPC, JPC 2.0, AVS, and LVS.

Crye's dedicated rifle-mag front flap. Three integrated M4 mag pouches on the detachable flap interface shared by the AVS, JPC 2.0, and AirLite SPC.

Crye's low-profile three-mag front flap, built on the slick front of the JPC and CPC. Three open-top M4 cells with shock-cord retention on the detachable flap interface shared by the AVS, JPC 2.0, and AirLite SPC.

The blank-slate front flap for the Crye ecosystem. Three rows of MOLLE webbing that bolt onto an AVS platebag, JPC 2.0, or AirLite SPC and take whatever pouching the mission needs.

A UCAS front flap with a six-column MOLLE face and insert space for three AR or four subgun magazines.

A 4.5 oz MOLLE placard with six columns, a loop-lined insert pocket, and adjustable 1-inch attachment points.

An elastic 5.56 placard with a rear hook field, open webbing cell bases, and included ITW Nexus hardware.