Muzzle Devices

Three-function flash hider, compensator, and SOCOM Fast-Attach suppressor mount in one device.

17-4 stainless Xeno taper-mount flash hider; its left-hand threads keep the Xeno adapter from unthreading out of the can on removal.

Three-prong flash hider that doubles as the mount for SureFire's 5.56 SOCOM Fast-Attach suppressors.

HUXWRX QD flash hider; the suppressor threads on counter-clockwise so firing tightens the joint.

Benelli Crio Plus 12-gauge choke focused on practical buckshot pattern control.

Original Plan B taper mount muzzle brake with 360-degree ports for rock-solid suppressor attachment.

Compact single-port compensator from Agency Arms with front sight relocation hole. Available in single or dual port configurations for Glock 17/19/34.

Self-timing PRS muzzle brake with a 6.5mm bore for 6.5 Creedmoor precision rifles on 5/8-24 threaded barrels.

Compensator for reduced muzzle rise

.30-caliber 5/8-24 muzzle brake with KeyMo suppressor quick-attach.

Xeno taper-mount muzzle brake whose left-hand threads keep the Xeno adapter from unthreading out of the can on removal.

Aluminum .22LR compensator with directed top and side ports, sized for the rimfire cartridge and threaded 1/2x28.

Three-port 7075-aluminum Glock compensator with finned and no-fin versions for maker-listed Gen 4, Gen 5, and Gen 6 models.

Premium 30-port extended turkey choke with a tight constriction built for the densest TSS patterns.

Slim four-port 14x1LH AK muzzle brake for 7.62x39 AKM rifles.

Unique gas-driven counter-balance compensator system that requires no threaded barrel. Uses expelled gases to drive a counterweight that attenuates recoil. Adds 1.625" to overall length at 3.2 oz.

Ultra-compact compensator barely larger than a thread protector at 0.69" wide. Stainless steel with nitride finish, designed specifically for concealed carry with minimal impact on holster compatibility.

Two-piece nitrided-steel brake that tames .308 recoil while matching the external profile of the USGI flash suppressor.

Compact compensator with generation-specific guide rod cover for clean fitment. Measures 1.25" long at 0.8 oz with anodized aluminum construction.

Open-body steel compensator for 1/2x28 rimfire and 5.7x28mm barrels, with an easy-clean coating and toolless timing.

Budget two-chamber 14x1LH brake that tames short-barrel 7.62x39 AK blast and rise.

7075 aluminum two-piece compensator that installs in seconds without set screws. Measures 1.6" x 1" x 1.4" at 1.5 oz with 1/2x28 threading.

Steel 9mm compensator for 1/2x28 threaded fixed barrels that vents at dual 45 degree angles and adds muzzle weight to flatten recoil.

Universal 1/2x28 9mm compensator that fits any threaded 9mm including the Hellcat Pro with aftermarket threaded barrel.

Premium compensator with tool-free installation. Pushes to thread shoulder for superior bore alignment with equal air gap around the bullet. Includes lifetime warranty.

Generation-correct Agency 417 compensator option for Gen3/4 Glock 17/19/34 threaded-barrel builds.

Slimline 417C with single- or dual-port options for Glock 43, 43X, and 48 threaded barrels.

The OPS Inc 12th-Model SPR brake and collar, the clone-correct MK12 muzzle device and AEM-5 suppressor mount

The .30-caliber-bore Gen 4 Little Bastard for a .308 or 7.62 RPR: self-timing tunable competition brake, threaded 5/8x24, jam-nut indexed without shims.

Self-timing tunable competition brake for 6mm and 6.5mm precision rifles, threaded 5/8x24 with a jam-nut that indexes without shims.

Cross-specific titanium full-port muzzle brake. Threaded 5/8x24 to drop directly onto Cross 6.5 Creedmoor and .308 barrels with no gunsmith work.

Grade-5 titanium full-port muzzle brake threaded 5/8x24 for .30-caliber and 6.5mm bores, cut to shed weight while taming muzzle rise.

Complete factory barrel-guide assembly for the TP9 and MP9, sold as the upgrade path for earlier hosts.

Factory 12-gauge Crio-system improved-cylinder tube for the legacy M2 family, kept separate from M4 and SuperNova Standard/Mobil-pattern tubes.

Steel slimline Glock comp with set screws, supplied Vibra-Tite, and Zaffiri-slide contouring.

Benelli Crio Plus extended cylinder choke for a wide buckshot pattern and slug-friendly baseline.

Benelli Crio Plus light-modified 12-gauge choke for tighter buckshot pattern control at longer distances.

Extra-full extended turkey choke that tightens the pattern into a dense, lethal core at 40-plus yards, the mainstream value upgrade.

Ported 12-gauge Invector-Plus tube with an improved-cylinder .730-inch exit diameter.

Ported 12-gauge Rem Choke tube with an improved-cylinder .720-inch exit diameter.

Dedicated 7075 aluminum VP9 compensator with separate M13.5x1 LH and 1/2x28 variants for factory-HK or US-thread barrels.

SCAR 17 flash hider that indexes off the muzzle crown instead of the thin SCAR barrel shoulder.

.30-bore 1/2x28 muzzle brake that provides the native Dead Air KeyMo quick-attach interface.

Shim-timed 7075-aluminum compensator with maker-listed Glock 17, 19, 19X, 26, 34, 45, 47, and 49 variants.

Single-chamber slimline Glock comp with two 6-32 set screws and a flush-fit profile tuned to Faxon barrels.

Premium 3-prong flash hider with Plan-B compatibility and exceptional flash suppression.

Stainless steel .22LR compensator that vents at dual 45 degree angles and adds 2.83 oz of muzzle weight for balance.

Threadless four-port GG92 compensator with self-aligning standoff for full-size 92-pattern pistols.

Threadless two-port compensator and guide rod for full-size Beretta 92-pattern pistols.

Two-port threadless compensator and guide rod for railed Beretta 92X and M9A1-pattern pistols.

Threadless three- or four-port compensator for full-size railless Beretta 92-pattern pistols.

Four-port threadless compensator and guide rod for full-size non-railed Beretta 92-pattern pistols.

Four-port threadless compensator and guide rod for railed Beretta 92X and M9A1-pattern pistols.

Drop-in compensator that fixes the factory thread-protector loosening problem and adds real muzzle compensation in one machined piece.

Slimline Glock compensator with set-screw retention and broad G43, G43X, and G48 slide fitment.

Compact three-port 7075-aluminum compensator for maker-listed Glock 17, 19, 19X, 26, 34, and 45 pistols through Gen 6.

CC9-specific rail-mounted compensator that works with the factory non-threaded barrel.

Dedicated VP9 and VP40 compensator that installs without a threaded barrel. Offered in five colors and incompatible with threaded barrels.

Model 0005 turkey choke with .665 constriction for 12-gauge Benelli M2 barrels using the removable Crio or Crio Plus system.

Compact 1-inch Plan-B device machined from 17-4 stainless with nitride finish.

Three-inch direct-thread Stribog muzzle extension that carries blast beyond an SRX3 or SRX3.25 rail without forwarding a mounting interface.

A311 carbon steel hybrid brake and compensator for the Sub 2000's factory 1/2x28 barrel, for owners who want flatter tracking on a 9mm carbine.

PC Carbine and PC Charger muzzle brake for owners who want a visible compensator or competition-oriented muzzle device on the factory 1/2x28 threaded barrel.

1/2x28 muzzle brake cut for the 9mm FPC that flattens the carbine's already-mild recoil for faster follow-up shots.

Captured guide-rod compensator for Glock 17 Gen 3, Gen 4, and Gen 5 slides that does not require a threaded barrel.

Muzzle-face-indexed micro comp for thin micro-compact barrels across Glock slimline, SIG P365, and Hellcat hosts, with no timing hardware.

Hardened 17-4 stainless compensator that cuts about 75% of .308 recoil; the serious recoil-reduction brake for an AR-10.

Model 69421 extended .650 turkey choke for 12-gauge Benelli M2 barrels using removable Crio tubes.

AK-V-specific tank brake with 1/2x28 threads.

Compact 3-prong flash hider with Plan-B taper mount for lightweight suppressor attachment.

Plan-B compatible PRS brake in .280-bore 1/2x28 black.

Three-port brake that anchors the SilencerCo ASR (Active Spring Retention) quick-detach mounting ecosystem.

KSG-specific external adapter that mounts a Salvo 12 shotgun suppressor with an improved-cylinder choke.

The explicit California-legal Synergy Comp: same compensator as the standard model with the flash-suppression function removed.

Six-inch direct-thread Stribog muzzle extension that carries blast beyond an SRX6 rail and also works with the shorter SRX3 family.

Dual-chamber compensator that is California featureless legal because it functions as a brake, not a flash hider.

Ratchet-lock slimline Glock comp that needs no shims, set screws, or clocking procedure.

7075-aluminum Glock slimline comp with a locking block and no threadlocker requirement.

Brake-and-compensator hybrid with no flash-hiding geometry, making it the VG6 device that is California featureless legal.

The .30-caliber-bore Hellfire Match for a .308 or 7.62 precision rifle: self-timing PRS brake on a 5/8-24 threaded barrel with a bore that clears .30-cal projectiles.

A2-pattern flash hider family with 1/2x28 for .22-caliber bores and 5/8x24 for .30-caliber bores.

Short single-port 1/2-28 9mm brake that presents Dead Air's KeyMicro lockup to a KeyMicro or KeyMo adapter.

Short single-port 5/8-24 9mm-bore brake that presents Dead Air's KeyMicro lockup to a KeyMicro or KeyMo adapter.

Short 1/2-28 9mm flash hider that presents Dead Air's KeyMicro lockup to a KeyMicro or KeyMo adapter.

Short 5/8-24 9mm-bore flash hider that presents Dead Air's KeyMicro lockup to a KeyMicro or KeyMo adapter.

Three-prong flash hider for 1/2-28 .223/5.56 barrels with a Dead Air KeyMo suppressor interface.

SCAR 16 flash hider that indexes off the muzzle crown instead of the thin SCAR barrel shoulder.

5/8-24 single-port big-bore brake that provides the self-aligning Xemax taper for a Nomax 33 or Primal.

1/2x28 .30-caliber A1 flash hider that presents Dead Air's Xeno taper mount to a Xeno-adapted suppressor.

Tapered 1/2x28 rimfire brake that provides the XRF lockup the RXD22Ti mounts to.

Hybrid comp/brake that threads into numerous suppressor ecosystems.

1/2x28 9mm barrel adapter that presents the EZ-LOK male taper to a Griffin pistol-can piston.

Thread-on .45-caliber compensator made for the FN FNX-45 Tactical's .578x28 muzzle.

Platform-specific 12x1 left-hand Bi-Lock brake for the GSL P90 suppressor on a short P90 / PS90 barrel.

Factory HK thread protector for M16x1 LH threaded USP45 Tactical and HK45 Compact Tactical barrels.

5/8x24 7.62 flash hider for native HUXWRX QD rifle suppressors including the FLOW 762 Ti.

Dual-purpose 5.56 compensator / flash hider for JK's Quick Attach Taper Mount.

14x1LH facemount 360 brake with 1.375-24 HUB external threads.

1/2x28 three-prong flash hider and native QDC mount for Knight's Armament 5.56 suppressors.

1/2-28 open brake that hosts KAC's 5.56mm QDC suppressors and clears shrouded handguards.

Slim 6061 aluminum flash can that pushes muzzle blast forward and tucks inside a handguard on 1/2x28 muzzles.

A2-style flash hider with Plan-B taper mount compatibility.

A7-style flash hider with Plan-B mounting for improved flash suppression.

Exact .500-bore, 11/16x24 A7 flash hider for the Ruger AR-556 MPR .450 Bushmaster.

Exact .500-bore, 5/8x24 A7 flash hider for the GForce Jawbone .45 with a Plan B output.

Aggressive Plan-B brake with large ports for maximum recoil reduction.

9mm linear compensator for AR9/PCC barrels that pushes blast forward on 1/2x28 threaded muzzles.

Compact Plan-B brake for tight suppressor-to-blast baffle clearance applications.

Plan-B flash hider available in pin-and-weld lengths for 13.7" and 14.5" barrels.

Plan-B brake with substantial recoil reduction and 360-degree ports requiring no timing.

Universal 1/2x28 micro comp that uses an O-ring for timing and retention on shouldered barrels.

Reverse-venting triple-baffle AR-15 compensator rated at 73-75% recoil reduction; the flat-shooting 5.56 brake.

5/8x24 version of Q's 7.62-bore taper brake for Quickie and standard Plan B attachment.

M18x1.5 8.6 Blackout brake for Q's enlarged Quickie XL suppressor attachment system.

Double-port Plan-B brake designed for barrels larger than .750 inches with enhanced recoil control.

Plan-B compatible flash hider with nitride finish for durability and corrosion resistance.

Recoil-reducing Plan-B brake with .375 bore for multi-caliber compatibility.

Single-port Plan-B brake for aggressive recoil reduction and minimal muzzle rise.

Compact 1/2x28 brake for Rugged's Dual Taper Lock rifle-suppressor ecosystem.

Compact 5/8x24 brake for Rugged's Dual Taper Lock rifle-suppressor ecosystem.

5.56 flash hider with a 90-degree shoulder for SIG's Clutch-LOK QD rifle-suppressor system.

Thread-on 9mm three-lug muzzle device for fixed-barrel PCC and subgun suppressor attachment.

1/2x28 closed-tine 5.56 flash hider that doubles as the host-side ASR mounting surface.

1/2x28 5.56 three-prong flash hider that doubles as the host-side ASR mounting surface.

5/8x24 .30-caliber three-port brake for SilencerCo's ASR quick-attach mounting ecosystem.

7.62 three-prong flash hider and SOCOM Fast-Attach suppressor adapter for 5/8x24 barrels.

Model-specific .385-inch TSS #9 turkey choke for the .410-bore Savage/Stevens Model 301 Short Invector barrel.

1/2x28 5.56 flash hider for YHM's ratcheting Phantom Q.D. suppressor mount.

5/8x24 .30-caliber brake that presents YHM's Phantom Q.D. lockup for HUB cans running the YHM-3060 adapter.

Short 1/2x28 brake that presents YHM's sRx taper lockup for HUB cans running the YHM-4400 adapter.

Factory 26x1.5mm LH booster for ZPAP85 and ZPAP92 pistols.

Generation-specific ZEV pistol compensator for Gen 5 Glock builds using a 1/2x28 threaded 9mm barrel.