Controls

Second-generation Arc-Fire FRS with reduced drag and traditional 0/90/180 ambidextrous throw

Drop-in forced reset selector with three firing modes at a lower price point

Extended mil-spec style charging handle

Premium ambidextrous charging handle with gas deflection

Full-size reinforced-polymer AR grip with a steeper 17-degree angle for short length-of-pull builds

Industry-standard ambidextrous charging handle

Ergonomic pistol grip with reduced angle

Ambidextrous charging handle with reinforced polymer overmold

Drop-in ambidextrous forced reset selector with three firing modes

3-position forced reset selector (super safety) for AR-15 platforms

Ambidextrous aluminum M-LOK thumbshelves that give the support hand a repeatable reference point for recoil tracking off a support bag

Modular ambidextrous safety selector with configurable throw angles

Single-side FRS with traditional mil-spec selector lever for retro and clone builds

More-vertical AK grip for stamped and milled Kalashnikov-pattern firearms.

The original gas-defeating charging handle. Best at keeping gas out of your eyes when running suppressed.

Hoffman-pattern Super Safety kit in heat-treated M2 tool steel with DLC coating and a pre-cut trigger in the box

Ambi forced reset selector that drops in with stock Geissele SSA, SSA-E, and G2S triggers, no trigger cut required

Short vertical foregrip optimized for modern shooting techniques

400 series stainless ambi safety with Geissele Posi-Snap detent for unmistakable tactile feedback

Enhanced AK safety lever with lower manipulation shelf and bolt-hold-open notch.

Standard Magpul pistol grip with A2-equivalent angle and improved ergonomics

Rubber-overmolded steep-angle pistol grip for maximum traction and control

Compact direct-attach M-LOK vertical foregrip in reinforced polymer with TSP texture

8620 steel ambi safety with 50-degree throw and offset Q levers

Solid brass GridLOK panels for the X-series SIG P226 that push grip weight to roughly 9.5 oz, about 3 oz past SIG's tungsten-infused X-Five Legion grips.

Three-piece M-LOK kit with hand stop, index panel, and rail cover for shooter-configurable layout

Direct-clamp Picatinny 90-degree vertical foregrip in reinforced polymer for any 1913 rail

Standard USGI A2 pistol grip, the baseline every aftermarket grip replaces

TP9-specific angled foregrip that straddles the receiver's cast vertical-grip boss.

Bren 2-specific 30-degree angled foregrip that mounts directly to the factory or HBI handguard.

Ambidextrous AR-15 charging handle with a raised rear Gas Deflection Shelf and modular levers

Machined 6061-T6 aluminum M-LOK hand stop with Type III hardcoat anodizing at 0.8 oz

HK416/MR556-specific ARC-Fire V2 kit with compatible ambidextrous selector levers and three throw choices

Factory folding left-side charging handle for the GHM9 and GHM45 that reduces the handle's stowed profile.

Most vertical AR pistol grip at 13 degrees with extended tang and aggressive texture

4140 steel modular ambi safety with red enamel indicator and configurable throw

Swiss CNC-machined steel ambi safety with reversible 90 or 60 degree throw

Kinesthetic angled grip with forward rake for C-clamp shooting, designed with Travis Haley

Gas-blocking ambidextrous charging handle that baffles back-pressure on suppressed and SBR builds

Premium ambidextrous charging handle with anti-gas features for suppressed shooting

Non-reciprocating side charger that converts a standard AR-15 upper without a new receiver

Ergonomic 12-degree pistol grip designed to reduce ulnar nerve tension

Three-piece M-LOK foregrip with rear body, fingerstop, and bridge for configurable layouts at 1.0 oz total

Ed Brown's signature Double Diamond pattern in G10, the gunsmith-grade pick that pairs traditional 1911 looks with G10 durability

Low-profile M-LOK hand stop and barricade support for improved weapon control

Rubber-overmolded AR pistol grip with finger grooves, the original soft-grip ergonomic AR upgrade

Premium boutique 6061 aluminum M-LOK hand stop with 10-degree forward angle and flared base

Ambidextrous charging handle with a raised rear lip that seals the channel against suppressor gas

Ambidextrous .308/7.62 charging handle with a raised rear lip that seals the channel against suppressor gas

Oversized bolt release for the Benelli M4 that provides glove-friendly operation and faster manipulation.

G10 grip panels for the SIG P226 with a Piranha texture roughly 40 percent more aggressive than factory rubber, sized to carry without shredding cover garments.

CNC-machined 6061 aluminum grip panels for the SIG P211 GTO/GT4/GT5 grip module, adding LOK's GridLOK texture and a touch of front-end weight.

Suppressor-normalized ambidextrous AR-15 charging handle with forward gas venting

Extended folding charging handle for the B&T APC9 Pro with a finger catch 6mm longer than the factory lever, chromoly steel and 6061-T6 aluminum.

Modular 7075-aluminum selector kit for B&T APC, GHM, and SPC lowers with long, short, and delete-side lever options.

Nickel-coated replacement selector springs that reduce the heavy B&T safety detent force without changing the selector itself.

Drop-in extended charging handle that adds 3.5mm of length to clear mounted optics and rail accessories.

Drop-in extended ambidextrous safety selectors with 3mm larger paddles and aggressive rib texture.

Right-side AK-style safety lever that fixes the factory selector dig and stiff throw without permanent modification.

Drop-in 11.5mm extended charging handle that pulls the support hand off mounted optics and accessories.

Drop-in Kuna safety selector with more surface area and contoured, rounded ledges. Machined 6061-T6 aluminum, MIL-A-8625 hardcoat anodized. Sold per side ($29 each, $58 for a full ambi replacement).

Drop-in extended charging handle that adds 8mm of height and length over the factory PS90 charging handle, billet 6061-T6 with Delrin bearing.

Replacement for the factory floating charging shuttle that locks the charging handle forward during cycling. Critical for sustained suppressed fire.

Spring-loaded folding charging handle that rotates outward when pulled and stows flush against the receiver. Ambidextrous installation, chromoly steel and 6061-T6 aluminum.

Drop-in oversized lever loop for faster, gloved cycling of Henry lever guns.

Drop-in extended magazine release that enlarges the factory paddle for faster, surer mag changes on the AUG A3 M1 standard stock.

Drop-in replacement safety selector for the AUG A3 M1 with smooth tapered edges and improved grip texture.

Billet extended cocking handle that roughly doubles the grab area to ease the awkward HK charging-handle slap.

Classic checkered cocobolo wood grips for the 1911, the value pick for traditional aesthetics

Genuine walnut hardwood grips for the Beretta 92FS, 92, and M9 full-size frame.

Hogue's factory-fit G10 Piranha grip panels for the SIG P226, the widely stocked baseline G10 upgrade off the factory rubber.

One-piece rubber wraparound grip with molded finger grooves for the 92FS, 92SB, 96, and M9.

Pre-cut heavy-grit adhesive grip for the HK CC9 medium grip module.

Billet aluminum featureless grip for California AR-15 builds that keeps a standard magazine release.

Ambidextrous Stribog charging handle with oversized knurled grip, black nitride steel construction. Mounts on either or both sides of the receiver.

The issued SOPMOD Block 1 vertical foregrip, clamps tool-free to any Picatinny rail

Polymer M-LOK vertical grip with an integrated finger stop, sized for the KRISS Vector's compact lower.

CNC-machined 6061 aluminum grip panels for the legacy DA/SA SIG P226 with LOK's GridLOK texture, adding muzzle-steadying weight and aggressive traction.

Aggressive Bogies-texture G10 grip panels at factory thickness for the Beretta 92.

Palm-swell G10 grips with Veloce multi-directional texture for the Beretta 92.

A311 carbon steel replacement charging handle for the Sub 2000 with a tool-less locking pin and a heavy-duty internal lockup, claimed to cut felt recoil by up to 68%.

Extended metal FPC charging handle with a rapid deployment latch plus a CNC Picatinny rail mount, a fix for the small, awkward factory plastic charging wing.

Reinforced polymer angled fore grip for thumb-over-bore C-clamp shooting, the genre-defining design

Magpul's modular ambi safety with three lever styles and color-coded indicators

Configurable ambi safety selector kit for CZ Scorpion EVO 3 with short, long, and safety-delete options

Minimalist half-slot M-LOK index finger stop with 1/8 inch protrusion for repeatable support-hand placement

Compact ambidextrous M-LOK vertical foregrip with TSP side panels and serrated straps for octagonal aluminum handguards

Ambidextrous M-LOK thumb rest with ribbed curved top for repeatable support-hand placement and muzzle control

Configurable grip kit with three interchangeable front and back straps to dial in size and shape

Extended ambidextrous magazine release paddle for CZ Scorpion EVO 3 with larger surface and textured ridges

Drop-in pistol grip for CZ Scorpion EVO 3 with improved angle and TSP texture

MOE grip wrapped in rubber overmolding for traction without changing the A2 angle

Folding charging handle for the AUG A2/A3/A3 M1 that pulls back to charge, auto-folds on release for a low-snag profile.

Drop-in aluminum bolt release with twice the height and surface area of the factory Hellion part.

Ambidextrous safety selector kit for the Grand Power Stribog with enlarged paddles and improved tactile feel. Drop-in replacement for the factory selector.

Folding charging handle that more than doubles the X95's grip length and stows flat against the receiver.

Aluminum KSG bottom-rail handstop with M-LOK light slots that keeps the support hand behind the muzzle.

Standard USGI T-handle charging handle, the baseline every upgrade is measured against

Standard USGI single-side safety selector with 90-degree throw

Premium MPX charging handle paired with the NLA lifter block to keep the handle locked in place under hard manipulation

Fixed-length Kuna charging handle in three sizes, knurled or slotted, mounts left, right, or both sides. Stainless steel with black nitride coating.

Drop-in enlarged ambidextrous safety levers for the FN SCAR with a positive, easy-to-find shelf.

The AR-10/.308-width Raptor, sized for SR-25 / DPMS / LR-308 uppers; the AR-15 Raptor does not fit

MCX-specific ambidextrous charging handle, the consensus first upgrade across SIG MCX Spear LT, Virtus, and Rattler builds

MPX-specific ambidextrous charging handle, the most-recommended first upgrade on the platform

Vertical pistol grip with swappable backstrap and palm-shelf options for fine-tuning hand fit

Latchless AR-15 charging handle that replaces both side latches with a single vertical grip on the centerline.

Mid-tier ambi safety with dual-throw drum and aluminum levers

The only aftermarket charging handle for the Daniel Defense PCC, ambidextrous and extended with a drop-in fit to the proprietary interface.

Ambidextrous charging handle with a captive O-ring that seals the gap and blocks suppressor gas

Extended polymer charging handle for CZ Scorpion EVO 3 at a fraction of the HBI Theta price

Extended ambidextrous magazine release for CZ Scorpion EVO 3 at a budget price point

Rubber-overmolded pistol grip for CZ Scorpion EVO 3 with thumb shelf and AR-style angle

Fin-style featureless grip that replaces the protruding pistol grip on a feature-restricted AR-15 build.

Latchless AR-15 charging handle with shooter-configurable gas venting, set left, right, or both sides for suppressed shooting.

Scout Light tailcap and SR07-D-IT pressure switch assembly for remote light and ATPIAL laser control.

Ambidextrous aerospace-aluminum charging handle knob for the Ruger PC Carbine, wrapped in rubber O-rings for grip.

Wrap-around textured rubber grip with finger grooves and vibration dampening for the Ruger Mark IV 22/45 grip frame.

Extended charging handle for the Ruger PC Carbine that installs with the factory cap screw and Ruger 65 in-lb torque spec.

Extended skeletonized charging handle for the Ruger 10/22. Captures the recoil spring on a screw for tool-free disassembly.

Duty-grade AR pistol grip with reinforced polymer body, integrated storage compartment, and aggressive texture

Oversized charging handle for the Benelli M4 that improves bolt manipulation speed and ergonomics.

Clamp-on enlarged AK charging handle with a three-set-screw attachment for faster action manipulation.

Thin-profile machined DWX grip panels with Vytal's medium-aggressive Euclid texture and selectable frame size.

CNC-machined 6061 aluminum DWX grip panels with Vytal's Kraken texture and selectable frame size.

Forward-mounted bolt release that lets the support hand close the bolt without leaving the firing grip.

Pre-cut adhesive grip tape for the HK VP9 and SFP9. Competition-grade abrasive texture in strategic placement for Production Optics shooters.

M-LOK mounted pressure switch for lights/lasers

Drop-in bolt release for the Ruger 10/22 that lets the bolt drop on a single rearward pull instead of the awkward factory two-step.

Medium-texture G10 panels for the full-size CZ 75 and SP-01, offered in standard or palm-swell thickness.

Aggressive G10 grip texture for full-size 1911s, the standard pick for duty and carry 1911 owners

Aggressive Operator II G10 grip panels cut specifically for the Beretta 92X Performance.

Aggressive golfball-textured G10 panels for the full-size CZ 75 and SP-01, with fitment reaching across the CZ 85 and Kadet frames.

Traditional diamond checkering cut sharp into G10 for the full-size CZ 75 and SP-01, in standard or palm-swell thickness.

LTT-exclusive ultra-thin G10 grip panels for the Beretta 92FS, 92 Compact, 96, and M9.

Wilson Combat's signature Starburst pattern G10 grips, the OEM grip on Wilson Combat factory pistols

Adhesive rubber grip wrap for the HK VP9 and VP40. Adds aggressive texture to the factory grip without replacing the backstrap or side panels.

Adhesive rubber grip wrap pre-cut for the Kimber 2K11 frame. Adds aggressive texture to the factory grip module without a gunsmith swap.

Ambidextrous 7075 charging handle for DPMS Gen 1-pattern AR-308 receivers, with large manipulation levers.

Wrap-around rubber grip for the SW22 Victory with finger grooves and an aggressive texture, using a vibration dampening compound.

Downward-swept 1018-steel charging handle for non-reciprocating SCAR 16S and 17S models.

Complete screwless SCAR selector assembly with one long lever, one short lever, and user-selectable 45- or 90-degree throw.

Complete Ruger-style 10/22 charging assembly with an extended cushioned handle, hardened tool-steel guide rod, and three tuning springs.

Rugged M-LOK barricade stop for loading into cover without chewing up the handguard

Direct-mount M-LOK angled fore grip with compact 1.2 oz polymer body

Oversized K2-style AR grip for larger hands and short length-of-pull rifles

Slim Line AR grip with a compact profile and modern angle for short rifles

Slim steep-angle AR grip for PDWs and compact short length-of-pull builds

Picatinny hand stop kit for legacy quad rails and non-M-LOK AR handguards

Low-cost extended bolt handle compatible with the Ruger PC Carbine, offered alongside Midwest's PC Carbine chassis system.

Wider fin-style featureless grip with a fuller palm shelf for shooters who want more support than the Simple grip.

Dual-button weapon light/laser remote switch with USB-C LINK system compatibility

Complete 10/22 charging assembly with a 416 stainless extended handle, precision-ground A2 recoil rod, and three recoil springs.